How to replace the front brake line on Chevrolet Colorado?

Raise your vehicle and take out the front tire and wheel to start replacing the front brake hose. Thoroughly remove all dirt particles from brake hose and pipe systems. Connect the brake pipe to the hose using a back up wrench and then place a plug or cap in the brake pipe fitting to prevent fluid leakages. Remove the brake pipe end from the frame at the brake hose and verify if the retaining clip shows signs of damage; replace it with a fresh part if it is deformed or cracked. Twist off the brake hose attachment point on the frame before taking out the bolt and gaskets from the brake caliper to remove the brake hose. Take off the copper gaskets from the brake hose fastener as they might adhere to either the brake caliper or bolt. Install new copper metal gaskets to the brake hose then fasten the brake caliper bolt to the caliper while tightening the brake hose bolt to 40 nm (32 ft. Lbs.). Insert the brake hose onto the brake pipe exposed fitting but avoid any unwanted hose twisting or suspension contact. Tighten the brake hose fitting with the back up wrench to 19 nm (14 ft. Lbs.) and check that the retaining clip fits correctly before adding the new brake pipe clip. Yield the hydraulic brake system fluid then put on the wheel tire combo and let the car sink to ground level.

How to replace the front brake line on a single piston caliper on Chevrolet S10?

Before you start replace the brake hose for a single piston caliper brake unit you need to lift the vehicle and take off its front tires and wheels. After cleaning all dirt particles from the brake hoses and brake pipes you need to remove them. Put on a back up wrench to eliminate the brake hose from the pipe and connect a plug to protect the exposed brake pipe from leaks and dirt. Unscrew the brake hose bolt and gaskets from the brake caliper before drawing out the brake hose. Also detach the brake pipe fitting from the flex brake hose at the frame boundary and strip off the front brake hose retainer at the frame bracket. Lastly remove the front flex brake hose bolt and gaskets from the brake caliper and its housing. Discard any stuck copper gaskets found on the brake caliper or brake hose bolt since these old gaskets cannot be reharnessed. Set new copper gaskets on the brake hose bolt and join the Brake Caliper Bolt to the brake caliper before tightening the brake hose bolt to 44 nm (32 ft. Lbs.). Insert the brake hose into the exposed brake pipe fitting and install it without any twisting. Also avoid letting the brake hose contact nearby suspension components. Use a back up wrench to fasten the brake hose fitting until it reaches 17 nm (13 ft. Lbs.). Install the brake pipe retainers. Complete brake system bleeding then put back the tire and wheel before lowering the vehicle.

OEM Chevrolet Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

536 Brake Lines found

View related parts
Chevrolet Flex Hose, Front Driver Side Part Number: 84237974
$18.14 MSRP: $32.87
You Save: $14.73 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake; Hose, Brakes
- Position: Front Driver Side
- Replaced by: 86538444
Fits the following Chevrolet Models:
- Camaro | 2016-2024 | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Flex Hose, Front Driver Side Part Number: 19173259
$14.39 MSRP: $25.70
You Save: $11.31 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 17980323, 18032001
Fits the following Chevrolet Models:
- Camaro | 1984-1992 | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Vacuum Tube Part Number: 20981799
$76.29 MSRP: $138.07
You Save: $61.78 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Power Brake Booster Vacuum; Brake Booster Vacuum Hose; Pipe, Vacuum Power Brake
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Flex Hose, Front Passenger Side Part Number: 84237979
$21.88 MSRP: $39.59
You Save: $17.71 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake; Hose, Brakes
- Position: Front Passenger Side
- Replaced by: 86538449
Fits the following Chevrolet Models:
- Camaro | 2017-2024 | LT, LT1, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Flex Hose, Rear Part Number: 19173455
$40.98 MSRP: $73.18
You Save: $32.20 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 17980326, 18032202
Fits the following Chevrolet Models:
- Camaro | 1984-1992 | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Flex Hose, Front Passenger Side Part Number: 84298057
$10.82 MSRP: $19.57
You Save: $8.75 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 84245977, 84168996
Fits the following Chevrolet Models:
- Colorado | 2017-2020 | ZR2 | 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Flex Hose, Rear Part Number: 18032000
$20.80 MSRP: $37.15
You Save: $16.35 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake Crossover; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
Fits the following Chevrolet Models:
- Camaro | 1984-1992 | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Flex Hose, Front Driver Side Part Number: 22925790
$43.22 MSRP: $81.17
You Save: $37.95 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Camaro | 2014-2015 | Z/28 | 8 Cyl 7.0 L GAS
View related parts
Chevrolet Flex Hose, Front Driver Side Part Number: 84718871
$11.78 MSRP: $21.32
You Save: $9.54 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Colorado | 2021-2022 | ZR2 | 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Flex Hose, Front Passenger Side Part Number: 84251379
$39.69 MSRP: $71.84
You Save: $32.15 (45%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 23220065
Fits the following Chevrolet Models:
- Corvette | 2015-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Brake Hose, Front Passenger Side Part Number: 84579663
$12.85 MSRP: $23.27
You Save: $10.42 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Blazer | 2019-2020 | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Flex Hose, Passenger Side Part Number: 84810943
$33.50 MSRP: $62.92
You Save: $29.42 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaced by: 85826408
- Replaces: 84683568
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Flex Hose, Front Driver Side Part Number: 84841277
$53.49 MSRP: $96.83
You Save: $43.34 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaced by: 85029669
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Flex Hose, Front Passenger Side Part Number: 84841278
$20.08 MSRP: $37.71
You Save: $17.63 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaced by: 86538568
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Flex Hose, Passenger Side Part Number: 84251377
$29.64 MSRP: $55.67
You Save: $26.03 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaced by: 85880712
- Replaces: 20988188
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Flex Hose, Driver Side Part Number: 87816735
$62.70 MSRP: $117.74
You Save: $55.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Brake Hose
- Position: Driver Side
- Replaced by: 86538588
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Flex Hose, Front Passenger Side Part Number: 22925809
$45.38 MSRP: $85.23
You Save: $39.85 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Camaro | 2014-2015 | Z/28 | 8 Cyl 7.0 L GAS
View related parts
Chevrolet Flex Hose, Driver Side Part Number: 84251376
$31.92 MSRP: $57.78
You Save: $25.86 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 20988187
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Brake Hose, Front Driver Side Part Number: 84579664
$13.03 MSRP: $23.27
You Save: $10.24 (45%)
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaced by: 86278336
Fits the following Chevrolet Models:
- Blazer | 2019-2020 | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Flex Hose, Rear Passenger Side Part Number: 19366780
$32.49 MSRP: $58.02
You Save: $25.53 (44%)
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 10307426, 15802376, 20989694
Fits the following Chevrolet Models:
- Corvette | 2005-2013 | Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS

| Page 1 of 27 |Next >

1-20 of 536 Results

Chevrolet Brake Line

Choose OEM Brake Line, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Brake Line. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Brake Line forces fluids free with no drama to ensure that the pedal is hard each time. Chevrolet had been making cars as early as 1911 and it continues to seek out truthful velocity combined with everyday comfort. Chevy provides engines that start responding fast, steering that is responsive, and cabins that teenagers can navigate without resorting to menu hunting. The range of products includes small urban hatchbacks on one end and vehicles that tow boats, but all products remain on simple controls. Chevy relies on utilitarian technology such as Super Cruise to make even long journeys seem shorter and safer to anyone in the car. Owners like the fact that they can pack road-trip gear or sports kits in the back without compromising the solid fuel figures when commuting. Chevrolet continues to lose pounds and noise to ensure its vehicles feel energetic without flogging wallets at the gas pumps. People put their faith in the badge since parts remain affordable and values are reasonable. Any Chevy uses steel tubing or braided stainless hose in a Brake Line to supply the master cylinder with hydraulic fluid to each caliper. As the metal tube corrodes, small holes cut into the hydraulic pressure and the pedal drains more than you want. Thickening of routing with stainless prevents rust before it develops and enhances pedal sensation to drivers who put the foot to the floor on winding roads. Re-insert a worn out Brake Line when you notice wet spots appearing on the tube and the system returns to full bite without any drama.

Chevrolet Brake Line Parts and Q&A

Flex Hose, Front Driver Side
15882536
Q: How to replace the front brake line on Chevrolet Colorado?
A:
Raise your vehicle and take out the front tire and wheel to start replacing the front brake hose. Thoroughly remove all dirt particles from brake hose and pipe systems. Connect the brake pipe to the hose using a back up wrench and then place a plug or cap in the brake pipe fitting to prevent fluid leakages. Remove the brake pipe end from the frame at the brake hose and verify if the retaining clip shows signs of damage; replace it with a fresh part if it is deformed or cracked. Twist off the brake hose attachment point on the frame before taking out the bolt and gaskets from the brake caliper to remove the brake hose. Take off the copper gaskets from the brake hose fastener as they might adhere to either the brake caliper or bolt. Install new copper metal gaskets to the brake hose then fasten the brake caliper bolt to the caliper while tightening the brake hose bolt to 40 nm (32 ft. Lbs.). Insert the brake hose onto the brake pipe exposed fitting but avoid any unwanted hose twisting or suspension contact. Tighten the brake hose fitting with the back up wrench to 19 nm (14 ft. Lbs.) and check that the retaining clip fits correctly before adding the new brake pipe clip. Yield the hydraulic brake system fluid then put on the wheel tire combo and let the car sink to ground level.
Flex Hose, Driver Side
15158649
Q: How to replace the front brake line on a single piston caliper on Chevrolet S10?
A:
Before you start replace the brake hose for a single piston caliper brake unit you need to lift the vehicle and take off its front tires and wheels. After cleaning all dirt particles from the brake hoses and brake pipes you need to remove them. Put on a back up wrench to eliminate the brake hose from the pipe and connect a plug to protect the exposed brake pipe from leaks and dirt. Unscrew the brake hose bolt and gaskets from the brake caliper before drawing out the brake hose. Also detach the brake pipe fitting from the flex brake hose at the frame boundary and strip off the front brake hose retainer at the frame bracket. Lastly remove the front flex brake hose bolt and gaskets from the brake caliper and its housing. Discard any stuck copper gaskets found on the brake caliper or brake hose bolt since these old gaskets cannot be reharnessed. Set new copper gaskets on the brake hose bolt and join the Brake Caliper Bolt to the brake caliper before tightening the brake hose bolt to 44 nm (32 ft. Lbs.). Insert the brake hose into the exposed brake pipe fitting and install it without any twisting. Also avoid letting the brake hose contact nearby suspension components. Use a back up wrench to fasten the brake hose fitting until it reaches 17 nm (13 ft. Lbs.). Install the brake pipe retainers. Complete brake system bleeding then put back the tire and wheel before lowering the vehicle.