How to replace the front brake line on Chevrolet Tracker?

Before starting replace the front brake hose you need to drain the brake fluid from the master cylinder reservoir while lifting and stabilizing the vehicle. Take off the wheel and tire from the front side to clean debris from brake hose connections. Separate the front brake hose from the front brake pipe while you remove its upper and lower clips and hose from the front strut assembly location. Separate the brake caliper when you withdraw its brake hose bolt along with both seal washers. Place the brake hose with its two seal washers inside the caliper parts before tightening the brake hose bolt to 23 nm (17 ft. Lbs). Place the front brake hose components onto the front strut before connecting the front brake hose to the pipe. Drain brake fluid first then put on the front wheel system before letting the car down to its normal position.

How to replace the rear brake line on Chevrolet Tracker?

Withdraw the brake fluid from the reservoir to the master cylinder and then lift and support the car. Clearly remove any dirt from the hose and the ports it connects to before releasing the rear brake hose from its points on the right rear pipe and center brake pipe. After that, connect the rear brake hose from the center brake pipe to the right rear brake pipe. Next, bleed the brake system and pull the car up onto the stands.

OEM Chevrolet Tracker Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
Chevrolet Tracker Flex Hose Part Number: 96065145
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Flex Hose Part Number: 96065144
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Flex Hose Part Number: 96061905
Product Specifications
- Other Name: Hose, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Flex Hose Part Number: 30021013
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Flex Hose, Driver Side Part Number: 30021011
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Flex Hose, Passenger Side Part Number: 30021010
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Chevrolet Tracker Brake Line

Want to cut long-term maintenance and repair costs? Choose OEM Brake Line. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tracker parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tracker Brake Line includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Brake Line used in Chevrolet Tracker is used to convey brake fluid from the master cylinder to the brake caliper pistons which makes the hydraulic brake to be effective. This system is important in that it makes it possible to stop or slow down the vehicle in case the brake pedal is depressed. The Brake Line of Chevrolet Tracker models throughout the years have varied from metal brake line and rubber brake hose type. Metal lines are vulnerable to corrosion and blows from road abrasive while rubber hoses suffer from cracks and internal wear and tear due to age and wrong connection methods respectively. While enhanced look doesn't justify the cost of braided stainless steel Brake Lines, the improvement in pedal feel and responsiveness, especially on high performance cars, cannot be denied. Other connectors include prebent brake line kits to facilitate easy connection which are made from corrosion considered materials.

Chevrolet Tracker Brake Line Parts and Q&A

Flex Hose
30021013
Q: How to replace the front brake line on Chevrolet Tracker?
A:
Before starting replace the front brake hose you need to drain the brake fluid from the master cylinder reservoir while lifting and stabilizing the vehicle. Take off the wheel and tire from the front side to clean debris from brake hose connections. Separate the front brake hose from the front brake pipe while you remove its upper and lower clips and hose from the front strut assembly location. Separate the brake caliper when you withdraw its brake hose bolt along with both seal washers. Place the brake hose with its two seal washers inside the caliper parts before tightening the brake hose bolt to 23 nm (17 ft. Lbs). Place the front brake hose components onto the front strut before connecting the front brake hose to the pipe. Drain brake fluid first then put on the front wheel system before letting the car down to its normal position.
Flex Hose, Driver Side
30021011
Q: How to replace the rear brake line on Chevrolet Tracker?
A:
Withdraw the brake fluid from the reservoir to the master cylinder and then lift and support the car. Clearly remove any dirt from the hose and the ports it connects to before releasing the rear brake hose from its points on the right rear pipe and center brake pipe. After that, connect the rear brake hose from the center brake pipe to the right rear brake pipe. Next, bleed the brake system and pull the car up onto the stands.

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Brake Line by Years

2004 2003 2002 2001 2000 1999 1998

OEM Chevrolet Tracker Brake Line

6 Brake Lines found

Chevrolet Tracker Flex Hose Part Number: 96065145

Chevrolet Tracker Flex Hose Part Number: 96065144

Chevrolet Tracker Flex Hose Part Number: 96061905

Chevrolet Tracker Flex Hose Part Number: 30021013

Chevrolet Tracker Flex Hose, Driver Side Part Number: 30021011

Chevrolet Tracker Flex Hose, Passenger Side Part Number: 30021010

Chevrolet Tracker Brake Line

Chevrolet Tracker Brake Line Parts and Q&A

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Brake Line by Years