How to replace the Brake Calipers on Chevrolet Colorado?

Lift the vehicle into position and support it properly at the beginning of brake caliper replacement. Take the wheel with tire off the vehicle. Replace the brake hose fitting gaskets with new ones during your work. Separate the brake caliper from its brake hose fitting by first taking off the bolt and secondly removing the gaskets then the brake fitting. Place a fitting cap on the hose to maintain the brake fluid supply during replacement. Once raised and supported, you must remove first the brake caliper guide pin bolts and then the brake caliper itself. Install the brake caliper at first and make sure to put the brake caliper guide pin bolts into place while tightening them to 64Nm (47 lb ft). Insert fresh brake hose gaskets when connecting the brake hose fitting bolt and gaskets to the brake hose fitting. Fix the brake hose assembly to the caliper and wrench-tighten the fitting bolt to 40 Nm (30 lb ft). After bleeding the brake lines you will put on the tire wheel unit.

How to replace the front dual piston brake calipers on Chevrolet S10?

The first step in front dual piston brake caliper replacement requires raising the vehicle before removing the tire wheel assembly. Detach the brake caliper hose bolt from the brake caliper before removing the 2 copper gaskets from the Brake Caliper Bolt. Dispose of these gaskets when finished. Plug the opening of the front brake hose before removing the brake caliper hose and washers from the caliper. Disassemble the brake caliper guide pin bolts before removing the brake caliper assembly. The new brake caliper should be mounted on its bracket and fastened with brake caliper bolts which require torque at 51 nm (38 ft. Lbs.). Fasten the brake hose bolt and washers before tightening it to 54 nm (40 ft. Lbs.). Follow the procedure to reach proper Brake Master Cylinder fluid level while simultaneously bleeding the Brake Calipers before reinstalling the tire and wheel assembly and lowering the vehicle down. For optimal brake hose bolt installation use fresh washers instead of reusing worn out parts.

OEM Chevrolet Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

603 Brake Calipers found

View related parts
Chevrolet Caliper, Red, Driver Side Part Number: 84229190
$778.55 MSRP: $1410.16
You Save: $631.61 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Brake*Performance D; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
Fits the following Chevrolet Models:
- Camaro | 2017-2024 | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Red, Driver Side Part Number: 23198734
$409.16 MSRP: $739.03
You Save: $329.87 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
Fits the following Chevrolet Models:
- Corvette | 2015-2019 | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Red, Driver Side Part Number: 22847809
$414.57 MSRP: $810.03
You Save: $395.46 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Blue, Rear Passenger Side Part Number: 84215958
$916.10 MSRP: $1656.57
You Save: $740.47 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Replaces: 84207626
Fits the following Chevrolet Models:
- Corvette | 2018-2019 | Grand Sport, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper Part Number: 92244287
$435.24 MSRP: $787.76
You Save: $352.52 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Replaces: 92233189
Fits the following Chevrolet Models:
- Camaro | 2010-2015 | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Yellow, Driver Side Part Number: 84733237
$524.79 MSRP: $948.32
You Save: $423.53 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper Part Number: 13279641
$116.70 MSRP: $219.13
You Save: $102.43 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Replaced by: 13578804
Fits the following Chevrolet Models:
- Camaro | 2010-2011 | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Caliper Part Number: 92244288
$446.98 MSRP: $809.01
You Save: $362.03 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Replaces: 92233188
Fits the following Chevrolet Models:
- Camaro | 2010-2015 | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Yellow, Rear Driver Side Part Number: 84733249
$479.60 MSRP: $866.54
You Save: $386.94 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
Fits the following Chevrolet Models:
- Corvette | 2020-2022 | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Yellow, Front Driver Side Part Number: 22847794
$512.40 MSRP: $960.69
You Save: $448.29 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Brake*Yellow; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Red, Rear Driver Side Part Number: 84733251
$436.08 MSRP: $787.76
You Save: $351.68 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
Fits the following Chevrolet Models:
- Corvette | 2020-2023 | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Red, Passenger Side Part Number: 23261811
$521.87 MSRP: $944.56
You Save: $422.69 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2016-2017 | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Edge Red, Passenger Side Part Number: 85621106
$357.55 MSRP: $645.62
You Save: $288.07 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2023-2024 | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Edge Red, Passenger Side Part Number: 84733242
$449.03 MSRP: $841.68
You Save: $392.65 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Torch Red, Driver Side Part Number: 85636352
$502.54 MSRP: $942.16
You Save: $439.62 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Torch Red; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
Fits the following Chevrolet Models:
- Corvette | 2023-2024 | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Red, Passenger Side Part Number: 84733240
$481.76 MSRP: $903.14
You Save: $421.38 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Black, Driver Side Part Number: 85621099
$324.53 MSRP: $585.86
You Save: $261.33 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Black; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
Fits the following Chevrolet Models:
- Corvette | 2023-2024 | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Yellow, Driver Side Part Number: 22847808
$418.64 MSRP: $786.16
You Save: $367.52 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Yellow, Passenger Side Part Number: 84733230
$524.79 MSRP: $948.32
You Save: $423.53 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Caliper, Blue, Passenger Side Part Number: 84215952
$1356.05 MSRP: $2452.86
You Save: $1096.81 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2018-2019 | Grand Sport, Z06, ZR1 | 8 Cyl 6.2 L GAS

| Page 1 of 31 |Next >

1-20 of 603 Results

Chevrolet Brake Calipers

Choose OEM Brake Calipers, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Brake Calipers. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Brake Calipers are sharp and each time the pedal is pressed, the pressure is transformed into a sharp stopping force. Chevrolet continues to attract drivers due to its cars that combine simple controls and powerful engines. Chevy is oriented towards everyday convenience with simple dashboards and infotainment that is easy to use. This strategy implies that new owners will be behind the wheel and it will feel like home in just a few minutes. Chevy also invests in safety helpers such as hands-free cruising in order to make highway miles get lighter. Long journeys remain easygoing since Chevrolet compromises the cushioning of the ride with steering that still communicates with the operator. When friends request a car that works as much as it plays, most people refer to Chevy without lamenting. Brake Calipers situated in each wheel well squeeze two pads onto rotating rotors whenever pressure in fluid spikes. The fixed ones press on each side until they bite and the floating ones move on pins as they save weight. Cast iron Brake Calipers dissipate heat and lighter aluminum ones reduce unsprung weight to enhance handling. The even push of even pad face by steel or phenolic pistons makes rotor square and prevents weird wear. Leaks or sticky slides can be captured early by a quick visual check and keep stopping distances very small.

Chevrolet Brake Calipers Parts and Q&A

Caliper
21998526
Q: How to replace the Brake Calipers on Chevrolet Colorado?
A:
Lift the vehicle into position and support it properly at the beginning of brake caliper replacement. Take the wheel with tire off the vehicle. Replace the brake hose fitting gaskets with new ones during your work. Separate the brake caliper from its brake hose fitting by first taking off the bolt and secondly removing the gaskets then the brake fitting. Place a fitting cap on the hose to maintain the brake fluid supply during replacement. Once raised and supported, you must remove first the brake caliper guide pin bolts and then the brake caliper itself. Install the brake caliper at first and make sure to put the brake caliper guide pin bolts into place while tightening them to 64Nm (47 lb ft). Insert fresh brake hose gaskets when connecting the brake hose fitting bolt and gaskets to the brake hose fitting. Fix the brake hose assembly to the caliper and wrench-tighten the fitting bolt to 40 Nm (30 lb ft). After bleeding the brake lines you will put on the tire wheel unit.
Overhaul Kit, Front
18003724
Q: How to replace the front dual piston brake calipers on Chevrolet S10?
A:
The first step in front dual piston brake caliper replacement requires raising the vehicle before removing the tire wheel assembly. Detach the brake caliper hose bolt from the brake caliper before removing the 2 copper gaskets from the Brake Caliper Bolt. Dispose of these gaskets when finished. Plug the opening of the front brake hose before removing the brake caliper hose and washers from the caliper. Disassemble the brake caliper guide pin bolts before removing the brake caliper assembly. The new brake caliper should be mounted on its bracket and fastened with brake caliper bolts which require torque at 51 nm (38 ft. Lbs.). Fasten the brake hose bolt and washers before tightening it to 54 nm (40 ft. Lbs.). Follow the procedure to reach proper Brake Master Cylinder fluid level while simultaneously bleeding the Brake Calipers before reinstalling the tire and wheel assembly and lowering the vehicle down. For optimal brake hose bolt installation use fresh washers instead of reusing worn out parts.