How to service and repair the front brake calipers on Chevrolet Corvette?

Installation of the heavy mechanic's wire serves to support the brake caliper after removal from its mounting bracket and preserves hydraulic flexible brake hose connection to prevent leaks and avoid damage. You should start by taking off brake pads and Brake Pad retainers from the caliper bracket. The next step involves separating caliper pins and caliper pin boots from the disc brake caliper mounting bracket. Use a wire brush to clean all areas on which brake pads contact until all corrosion has been eliminated. Attach caliper pin boots to the mounting bracket first and apply high temperature silicone lubricant to caliper pins before inserting them into the mounting bracket. Place the Brake Pad retainers and brake pads onto the caliper bracket followed by mounting the disc brake caliper onto its mounting bracket. Secure the disc brake caliper bolts with torque to 31 nm (23 ft. Lbs.) and perform the Brake Pedal operation up to a 3/4 stroke to achieve a firm Brake Pedal.

How to replace the front brake calipers on Chevrolet Corvette?

The vehicle needs an elevated position and wheel removal before replacing the front brake caliper. After lifting your car onto stands replace the inlet fitting bolt, invert it with the two internal gaskets and then remove all pieces. Keep the outlets of the brake caliper and inlet fitting sealed while disposing of the gaskets. Returning to driving with loose or removed fasteners creates a risk of losing vehicle control so they should be replaced right away. Detach the brake caliper from its guide pin then brake rotor positioning bracket while preventing the caliper from hanging from the flexible hoses. When keeping the brake caliper in place after inspection support it with a wire hook to prevent brake hose harm. You should take off brake pads when either their replacement occurs or when you remove the mounting bracket. During installation, set the brake pads properly with the outboard pad having its insulator against the housing and the inboard pad containing the wear sensor near the Piston for forward wheel movement. Insert the brake caliper housing onto the brake rotor through its mounting bracket while applying silicone grease gm p/n 18010909 to the inner parts of the caliper bolt boots and bolt shaft but keep the threads free from lubrication. Realign the brake caliper guide pin bolts before adding the inlet fitting and two gaskets with its bolt fastened at 40 nm (30 ft. Lbs.). When you take off the inlet fitting you need to bleed the hydraulic brake system. Place the tire assembly on the wheel and fasten all wheel nuts in a specific sequence. Tighten them to 140 nm (100 ft-lb) torque before allowing the vehicle to descend. Fill the master cylinder only with delco supreme 11 brake fluid (GM P/N 12377967) or similar dot 3 product from dry and clean sources other than petroleum-based fluids or water contacts. Fill the master cylinder tank until brake pedal responds strongly to pressing before starting the engine. Press the brake pedal gently and firmly three times while the engine runs to position the brake pads under the vehicle. Examine all hydraulic brake components for fluid leaks afterward.

OEM Chevrolet Corvette Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

227 Brake Calipers found

View related parts
Chevrolet Corvette Caliper, Red, Driver Side Part Number: 84733239
$524.79 MSRP: $948.32
You Save: $423.53 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Yellow, Driver Side Part Number: 23198736
$384.98 MSRP: $695.27
You Save: $310.29 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Yellow, Passenger Side Part Number: 85621102
$337.89 MSRP: $632.96
You Save: $295.07 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Yellow, Front Passenger Side Part Number: 22847799
$531.34 MSRP: $996.24
You Save: $464.90 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Brake*Yellow; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Black, Driver Side Part Number: 84733227
$481.77 MSRP: $903.16
You Save: $421.39 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Yellow, Passenger Side Part Number: 22771690
$854.40 MSRP: $1604.51
You Save: $750.11 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Red, Driver Side Part Number: 85621103
$324.53 MSRP: $585.87
You Save: $261.34 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Red, Passenger Side Part Number: 85621104
$357.55 MSRP: $645.62
You Save: $288.07 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Yellow, Rear Passenger Side Part Number: 84207622
$839.88 MSRP: $1577.23
You Save: $737.35 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Replaces: 23198745
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Black, Passenger Side Part Number: 85621100
$327.65 MSRP: $613.72
You Save: $286.07 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Red, Rear Driver Side Part Number: 23261812
$344.51 MSRP: $623.53
You Save: $279.02 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Corvette | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Black, Passenger Side Part Number: 23198739
$396.30 MSRP: $715.74
You Save: $319.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Red, Driver Side Part Number: 84733231
$481.76 MSRP: $903.14
You Save: $421.38 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Orange, Rear Passenger Side Part Number: 84303485
$625.70 MSRP: $1173.43
You Save: $547.73 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Yellow, Passenger Side Part Number: 22847814
$424.16 MSRP: $794.94
You Save: $370.78 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Orange, Passenger Side Part Number: 85621112
$315.79 MSRP: $591.46
You Save: $275.67 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Red, Driver Side Part Number: 23261810
$558.04 MSRP: $914.82
You Save: $356.78 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Corvette | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Red, Passenger Side Part Number: 84200802
$809.03 MSRP: $1464.31
You Save: $655.28 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Replaces: 23261823
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Corvette | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Black, Passenger Side Part Number: 84733228
$481.77 MSRP: $903.16
You Save: $421.39 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Caliper, Orange, Rear Driver Side Part Number: 84303487
$643.82 MSRP: $1207.47
You Save: $563.65 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS

| Page 1 of 12 |Next >

1-20 of 227 Results

Chevrolet Corvette Brake Calipers

Want to cut long-term maintenance and repair costs? Choose OEM Brake Calipers. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Brake Calipers includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Brake Caliper in Chevrolet Corvette is part of the disc brake system which helps to slow or stop the automobile through contact with brake pads that clamps and apply pressure on rotors. Whenever the brake pedal is pressed, the brake fluid moves and applies pressure on the pistons which are in the caliper then creates the amount of friction needed to stop the car. Chevrolet Corvette models have utilized two primary types of Brake Calipers: They are the fixed and the floating. There are fixed brake calipers that are rigid and situated and contain several pistons on both the sides of the rotor to give top performance, but could be quite expensive. The floating Brake Calipers, also known as the sliding calipers incorporate one piston that produces the calipers movement towards pressing the sides of the rotor, and the construction results in them being prone to problems such as sticking triggered by dirt or corrosion. Knowledge of these differences is vital in the endeavor of ensuring that Chevrolet Corvette vehicles perform optimally when on the road and at the same time possess satisfactory safety measures.

Chevrolet Corvette Brake Calipers Parts and Q&A

Caliper, Driver Side
88895128
Q: How to service and repair the front brake calipers on Chevrolet Corvette?
A:
Installation of the heavy mechanic's wire serves to support the brake caliper after removal from its mounting bracket and preserves hydraulic flexible brake hose connection to prevent leaks and avoid damage. You should start by taking off Brake Pads and Brake Pad retainers from the caliper bracket. The next step involves separating caliper pins and caliper pin boots from the disc brake caliper mounting bracket. Use a wire brush to clean all areas on which brake pads contact until all corrosion has been eliminated. Attach caliper pin boots to the mounting bracket first and apply high temperature silicone lubricant to caliper pins before inserting them into the mounting bracket. Place the Brake Pad retainers and brake pads onto the caliper bracket followed by mounting the disc brake caliper onto its mounting bracket. Secure the disc brake caliper bolts with torque to 31 nm (23 ft. Lbs.) and perform the Brake Pedal operation up to a 3/4 stroke to achieve a firm Brake Pedal.
Caliper, Passenger Side
12530684
Q: How to replace the front brake calipers on Chevrolet Corvette?
A:
The vehicle needs an elevated position and wheel removal before replacing the front brake caliper. After lifting your car onto stands replace the inlet fitting bolt, invert it with the two internal gaskets and then remove all pieces. Keep the outlets of the brake caliper and inlet fitting sealed while disposing of the gaskets. Returning to driving with loose or removed fasteners creates a risk of losing vehicle control so they should be replaced right away. Detach the brake caliper from its guide pin then brake rotor positioning bracket while preventing the caliper from hanging from the flexible hoses. When keeping the brake caliper in place after inspection support it with a wire hook to prevent brake hose harm. You should take off Brake Pads when either their replacement occurs or when you remove the mounting bracket. During installation, set the brake pads properly with the outboard pad having its insulator against the housing and the inboard pad containing the wear sensor near the Piston for forward wheel movement. Insert the brake caliper housing onto the brake rotor through its mounting bracket while applying silicone grease gm p/n 18010909 to the inner parts of the caliper bolt boots and bolt shaft but keep the threads free from lubrication. Realign the brake caliper guide pin bolts before adding the inlet fitting and two gaskets with its bolt fastened at 40 nm (30 ft. Lbs.). When you take off the inlet fitting you need to bleed the hydraulic brake system. Place the tire assembly on the wheel and fasten all wheel nuts in a specific sequence. Tighten them to 140 nm (100 ft-lb) torque before allowing the vehicle to descend. Fill the master cylinder only with delco supreme 11 brake fluid (GM P/N 12377967) or similar dot 3 product from dry and clean sources other than petroleum-based fluids or water contacts. Fill the master cylinder tank until brake pedal responds strongly to pressing before starting the engine. Press the brake pedal gently and firmly three times while the engine runs to position the brake pads under the vehicle. Examine all hydraulic brake components for fluid leaks afterward.