How to replace the power steering hose assembly on Chevrolet Colorado?

Installing a drain pan under the vehicle represents the first step when replacing the Power Steering Hose assembly. First disconnect the Power Steering Hose assembly from the Power Steering Pump and set the vehicle on proper safety stands while raised to a suitable height. First remove the bracket retaining bolts of the Power Steering Hose assembly then take out the hose assembly retaining bolt which connects to the power steering gear. You should disconnect the power steering gear to remove the hose assembly from the vehicle while performing complete cleaning of the power steering gear inlet and outlet ports so they remain clear of contamination. The power steering gear oil seal remover/installer (J 44586) should be used to extract the oil seals when replacing power steering gear components from a vehicle. The ports need another cleaning round before installing replacement oil seals through the use of the j 44586 tool. The power steering gear repair requires reinstallation followed by attachment of the hose assembly to the gear bolt which must be tightened to 12 nm (106 inch lbs.). The Power Steering Hose assembly retaining bolts need installation before they are torqued to 9 nm (79 inch lbs.). When the vehicle rests at its lowest position install the Power Steering Hose assembly to the Power Steering Pump and fasten it securely at 25 nm (18 ft. Lbs.). Finish by draining the fluid from the drain pan then fill the reservoir at the correct filling point before performing a power steering bleed procedure.

How to service and repair the Power Steering Hose on Chevrolet S10?

Service and repair operations on Power Steering Cooler pipe/hose start with removing the air cleaner assembly followed by draining the vehicle onto a pan. Connectors between the Power Steering Pump and Power Steering Cooler should be removed so hose removal from the vehicle becomes possible. When installing the hose attach it to the Power Steering Cooler as well as the Power Steering Pump. Torsion of the Power Steering Cooler hose clamp near the Power Steering Cooler needs to reach 2 nm (18 inch lbs.) whereas the hose clamp around the Power Steering Pump requires 2 nm (18 inch lbs.). The air cleaner assembly and power steering system bleed need to be installed following removal of the drain pan.

OEM Chevrolet Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

448 Power Steering Hoses found

View related parts
Chevrolet Return Line Part Number: 26068527
$81.32 MSRP: $152.72
You Save: $71.40 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooler Inlet; Power Steering Hose; Return Hose; Hose, Steering Fluid Cooler
Fits the following Chevrolet Models:
- Camaro | 1998-2002 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Power Steering Return Hose Part Number: 26028157
$32.56 MSRP: $51.00
You Save: $18.44 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
Fits the following Chevrolet Models:
- Lumina | 1991-1994 | Base, Euro | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Power Steering Pressure Hose Part Number: 26025653
$142.08 MSRP: $223.56
You Save: $81.48 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
Fits the following Chevrolet Models:
- Lumina | 1990-1991 | Base, Euro | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Power Steering Return Hose Part Number: 15876379
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Return Line; Return Hose; Hose, Steering Gear Oil Return
- Replaces: 15283623, 15291020
Fits the following Chevrolet Models:
- Impala | 2006-2009 | SS | 8 Cyl 5.3 L GAS
- Monte Carlo | 2006-2007 | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Reservoir Hose Part Number: 15898529
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Hose, Steering Gear Oil Pressure; Hose, Steering Gear Oil Return
- Replaces: 19133722
Fits the following Chevrolet Models:
- Impala | 2006-2008 | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
- Monte Carlo | 2006-2007 | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Power Steering Pressure Hose Part Number: 92249334
Product Specifications
- Other Name: Hose, Steering Fluid Cooler; Power Steering Hose; Power Steering Return Hose; Upper Return Hose
- Replaces: 92228382
Fits the following Chevrolet Models:
- Camaro | 2010-2013 | SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Pipe Kit, Passenger Side Part Number: 26055484
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Passenger Side
Fits the following Chevrolet Models:
- Impala | 2000-2011 | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
- Lumina | 1997-2001 | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
- Monte Carlo | 1997-2007 | Indianapolis 500 Pace Car, LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Power Steering Pressure Hose Part Number: 21993842
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26083979, 26070141
Fits the following Chevrolet Models:
- Impala | 2000-2005 | Base | 6 Cyl 3.4 L GAS
- Monte Carlo | 2000-2005 | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Reservoir Hose Part Number: 92243281
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Outlet; Power Steering Hose; Hose, Steering Gear Oil Pressure
- Replaces: 92237566
Fits the following Chevrolet Models:
- Camaro | 2010-2015 | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Pipe, Driver Side Part Number: 26060713
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure; Power Steering Hose
- Position: Driver Side
Fits the following Chevrolet Models:
- Camaro | 1998-2002 | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Power Steering Return Hose Part Number: 26019299
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
Fits the following Chevrolet Models:
- Camaro | 1993-1995 | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Pipe, Passenger Side Part Number: 26060712
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure; Power Steering Hose
- Position: Passenger Side
Fits the following Chevrolet Models:
- Camaro | 1998-2002 | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Reservoir Hose Part Number: 10098143
Product Specifications
- Other Name: Hose, Fluid Reservoir; Power Steering Hose; Hose, Steering Gear Oil Return
Fits the following Chevrolet Models:
- Corvette | 1990-1991 | Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Steering Line, Passenger Side Part Number: 26033525
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure
- Position: Passenger Side
Fits the following Chevrolet Models:
- Cavalier | 1995-2005 | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Pipe, Driver Side Part Number: 26019447
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure; Power Steering Hose
- Position: Driver Side
Fits the following Chevrolet Models:
- Camaro | 1993-2002 | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Power Steering Hose Part Number: 14104628
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Reservoir; Power Steering Return Hose; Reservoir Hose; Hose, Steering Gear Oil Return
Fits the following Chevrolet Models:
- Corvette | 1990-1995 | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Steering Line, Driver Side Part Number: 26033524
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure
- Position: Driver Side
Fits the following Chevrolet Models:
- Cavalier | 1995-2005 | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Pressure Hose Part Number: 26048589
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Power Steering Return Hose; Hose, Steering Gear Oil Return
Fits the following Chevrolet Models:
- Camaro | 1998-2002 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Power Steering Pressure Hose Part Number: 88998456
Product Specifications
- Other Name: Hose, Steering Gear Oil Pressure; Power Steering Hose; Hose, Hydraulic Steering Gear Pressure
Fits the following Chevrolet Models:
- Camaro | 1990-1992 | Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Pipe, Passenger Side Part Number: 26019448
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure; Power Steering Hose
- Position: Passenger Side
Fits the following Chevrolet Models:
- Camaro | 1993-2002 | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

| Page 1 of 23 |Next >

1-20 of 448 Results

Chevrolet Power Steering Hose

Choose OEM Power Steering Hose, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Power Steering Hose. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Power Steering Hose directs pressurized fluid to the steering gear so the drivers can have light and precise control at any speed. Chevrolet has been 100 years of producing cars that feel straightforward, strong and either at work or at play. Chevy maintains a sensible range of prices even as it overstocks its line with engines with swagger and cabins without a cluttered look. Drivers such as how Chevy combines crisp design and technology that removes boredom on long highway routes. Chevy cars go through everyday runs, long distance deliveries or weekend hikes without any sweat and even with components that have a unified logic regardless of whether they are sedans, trucks, or vans. The uniformity of that allows owners to exchange expertise and brave journeys with no problems. Constructed to withstand the high-pressure burst of the steering pump, the Power Steering Hose is made of reinforced synthetic rubber and tight-layered crimps to ensure that fluid does not foam or leak regardless of whether the engine bay is baked in summer heat or shakes in winter storms to maintain steering response being solid and predictable. There is a second Power Steering Hose that is applied to pump the fluid back to the reservoir and the fluid finishes the circuit and does not allow the wheel to feel jumpy due to aeration. Correct piping prevents kinking which restricts flow and prevents premature wear of the pumps.

Chevrolet Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
15136891
Q: How to replace the power steering hose assembly on Chevrolet Colorado?
A:
Installing a drain pan under the vehicle represents the first step when replacing the Power Steering Hose assembly. First disconnect the Power Steering Hose assembly from the Power Steering Pump and set the vehicle on proper safety stands while raised to a suitable height. First remove the bracket retaining bolts of the Power Steering Hose assembly then take out the hose assembly retaining bolt which connects to the power steering gear. You should disconnect the power steering gear to remove the hose assembly from the vehicle while performing complete cleaning of the power steering gear inlet and outlet ports so they remain clear of contamination. The power steering gear oil seal remover/installer (J 44586) should be used to extract the oil seals when replacing power steering gear components from a vehicle. The ports need another cleaning round before installing replacement oil seals through the use of the j 44586 tool. The power steering gear repair requires reinstallation followed by attachment of the hose assembly to the gear bolt which must be tightened to 12 nm (106 inch lbs.). The Power Steering Hose assembly retaining bolts need installation before they are torqued to 9 nm (79 inch lbs.). When the vehicle rests at its lowest position install the Power Steering Hose assembly to the Power Steering Pump and fasten it securely at 25 nm (18 ft. Lbs.). Finish by draining the fluid from the drain pan then fill the reservoir at the correct filling point before performing a power steering bleed procedure.
Power Steering Return Hose
7828506
Q: How to service and repair the Power Steering Hose on Chevrolet S10?
A:
Service and repair operations on Power Steering Cooler pipe/hose start with removing the air cleaner assembly followed by draining the vehicle onto a pan. Connectors between the Power Steering Pump and Power Steering Cooler should be removed so hose removal from the vehicle becomes possible. When installing the hose attach it to the Power Steering Cooler as well as the Power Steering Pump. Torsion of the Power Steering Cooler hose clamp near the Power Steering Cooler needs to reach 2 nm (18 inch lbs.) whereas the hose clamp around the Power Steering Pump requires 2 nm (18 inch lbs.). The air cleaner assembly and power steering system bleed need to be installed following removal of the drain pan.