How to Replace a Power Steering Hose and Ensure Proper Installation on Chevrolet Lumina?

The first step to replace the p/s cooler pipe/hose begins with placing a drain pan under the vehicle then raising it. First remove the power steering return hose from the power steering cooler pipe before detaching the power steering return line from the power steering gear and removing its clamp from the gear. The replacement process begins with removing power steering cooler pipe retaining bolts from the frame as a first step before extracting the power steering cooler pipe from its frame location. The installation procedure starts by attaching the power steering cooler pipe to the frame following service precautions fastener notice requirements before securing it using retaining bolts that should be tightened to 9.5 nm (86 inch lbs.). After mounting the clamp for steering lines on the power steering gear the technician should attach the power steering return line to the gear while tightening the fitting to 27 nm (20 ft. Lbs.). The power steering return hose must be attached to the power steering cooler pipe followed by draining the pan before lowering the vehicle then filling and bleeding the power steering system before leak checking.

OEM Chevrolet Lumina Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Power Steering Hoses found

View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26064186
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26052665, 26066945
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Power Steering Cooler Part Number: 26052663
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler; Power Steering Cooler Tube
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Power Steering Cooler Part Number: 26077758
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Hose, Steering Fluid Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Lumina | Base | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26046583
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet Lumina | Euro, LS, Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Pipe Kit, Passenger Side Part Number: 26031077
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Line Kit
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Power Steering Cooler Part Number: 26059142
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler; Power Steering Cooler Tube
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Lumina | LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Power Steering Hose, Driver Side Part Number: 26003750
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Steel Line; Fluid Pipe; Line Kit; Tube; Line Kit, Steering Gear Oil Pressure
- Position: Driver Side
- Replaces: 07843293, 7843293
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1996 Chevrolet Lumina | Base, Euro, LS, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Steel Line, Passenger Side Part Number: 26020450
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Line Kit, Steering Gear Oil Pressure
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1996 Chevrolet Lumina | Base, Euro, LS, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Power Steering Cooler Part Number: 26027584
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Cooler Tube; Pipe, Steering Fluid Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Lumina | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Return Hose Part Number: 26072653
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler; Power Steering Hose; Power Steering Cooler Tube
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Power Steering Cooler Part Number: 26000004
Product Specifications
- Other Name: Hose, Steering Gear Oil Pressure; Pipe, Steering Fluid Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26064184
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26047344
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Lumina | LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26064188
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Lumina | LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26077753
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Lumina | Base | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26014814
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Lumina | Base | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26027582
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Lumina | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26075972
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26058370
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26041521
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Lumina | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Power Steering Pressure Hose Part Number: 26027675
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet Lumina | Euro, Z34 | 6 Cyl 3.4 L GAS

| Page 1 of 2 |Next >

1-20 of 33 Results

Chevrolet Lumina Power Steering Hose

Want to cut long-term maintenance and repair costs? Choose OEM Power Steering Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Lumina parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Lumina Power Steering Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Lumina Power Steering Hose is a very important item which contributes to the consistency and efficiency of the power steering system of a Chevrolet Lumina. Intended for connecting the power steering pump to the steering gear so as to keep the flow of hydraulic fluid in check, this product guarantees smooth steering functionality, which can be crucial from the aspects of effectiveness and security. The vehicle that this Power Steering Hose is compatible with is the Chevrolet Lumina made between 1989 and 2013, and to ensure that you are getting a high-quality product that can stand the everyday wear and tear, this Power Steering Hose is made by the premier mechanics. As for the power steering hose, the hose design is high pressure which enables the substratum to transport the fluid efficiently, whereas, the hose for return is efficient in that it transfers the fluid back to the reservoir thus eliminated leakage and maintained the system. It is worth mentioning that the production of Chevrolet Lumina Power Steering Hose utilize sturdy materials that are especially useful in preventing wear and tear and damage from the environment, beneficial in maximizing the usability of the product for an extended period. Problems like leakage can cause high steering effort, nonetheless, well-fitted and well-routed Power Steering Hose will greatly improve the performance. This element is also dedicated to safety and efficiency, which are values that the Chevrolet Lumina truly cherishes; it is pivotal to emphasize that this part is truly remarkable in the automotive market thanks to its reliability and performance. All in all, the Chevrolet Lumina Power Steering Hose is one of the car's engineering marvels that make every drive safe and comfortable.

Chevrolet Lumina Power Steering Hose Parts and Q&A

Power Steering Return Hose
26077754
Q: How to Replace a Power Steering Hose and Ensure Proper Installation on Chevrolet Lumina?
A:
The first step to replace the p/s cooler pipe/hose begins with placing a drain pan under the vehicle then raising it. First remove the power steering return hose from the power steering cooler pipe before detaching the power steering return line from the power steering gear and removing its clamp from the gear. The replacement process begins with removing power steering cooler pipe retaining bolts from the frame as a first step before extracting the power steering cooler pipe from its frame location. The installation procedure starts by attaching the power steering cooler pipe to the frame following service precautions fastener notice requirements before securing it using retaining bolts that should be tightened to 9.5 nm (86 inch lbs.). After mounting the clamp for steering lines on the power steering gear the technician should attach the power steering return line to the gear while tightening the fitting to 27 nm (20 ft. Lbs.). The power steering return hose must be attached to the power steering cooler pipe followed by draining the pan before lowering the vehicle then filling and bleeding the power steering system before leak checking.