How to Replace the Front Rack and Pinion Steering Gear on Chevrolet Lumina?

Before you remove the old Rack And Pinion, raise and support the vehicle and then drain beneath the system to save the present used fluid. To remove the tire and wheel assembly, disconnect the intermediate shaft by the Rack And Pinion stub shaft, in so doing, the damage is avoided; adjust the Steering Shaft so the block tooth is located at the 12 o-clock position and with the wheels pointing straight forward and ignition switch in lock position. Do away with the middle Steering Shaft from the stub shaft and both link ends. Sustain the back of the wire framework with jackstands and eradicate the back construction screws from the back watchfully so as not to dump it excessively low in order to maintain such engine component integrity. Lower the rear of the frame and disconnect the power steering pressure line and return line from the Rack And Pinion. Then remove the Rack And Pinion mounting bolts and nuts, and pull out the Rack And Pinion through the left wheel opening. Installation: fordfestiva Rack And Pinion with the new use replace left wheel with gear mounting bolt and nuts, then tighten to 80 nm (59 ft. Lbs.). Check the threads of the power steering pressure line and return hose fitting and the o-ring seals; replace any damaged ones and lubricate before installation. Install the clamp for the power steering lines, and then connect the power steering pressure line and return line to the Rack And Pinion. Lift up the frame and bolt in new rear frame bolts before taking off the jackstands. Replace the tie rod ends and make sure that the Steering Shaft is placed properly as before. Tighten the intermediate Steering Shaft to the stub shaft and draw it down on the lower pinch bolt at 47nm (35 ft. Lbs.). At last, reassemble the tire and wheel assembly, remove the drain pan, lower the vehicle, and fill the power steering system with fluid, bleed the air off the system, check for leaks, and get an alignment of the front end.

OEM Chevrolet Lumina Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Rack And Pinions found

View related parts
Chevrolet Lumina Steering Gear Part Number: 26047206
$332.52 MSRP: $624.46
You Save: $291.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Kit, Steering; Gear Assembly
- Replaces: 26042017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Lumina | Base, LS | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Steering Gear Part Number: 26069922
$437.51 MSRP: $788.08
You Save: $350.57 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Steering Gear Part Number: 26055468
$334.89 MSRP: $655.68
You Save: $320.79 (49%)
ADD TO CART
Product Specifications
- Other Name: Gear Kit, Steering; Gear Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Gear Assembly Part Number: 26046139
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Kit, Steering
- Replaces: 26044829
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1992 Chevrolet Lumina | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Steering Gear Part Number: 26024892
Product Specifications
- Replaced by: 26044830
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Steering Gear Part Number: 26046146
Product Specifications
- Other Name: Gear Kit, Steering; Gear Assembly
- Replaces: 26024886
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Steering Gear Part Number: 26046144
Product Specifications
- Other Name: Gear Kit, Steering; Gear Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Chevrolet Lumina | Base, Euro, LS, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Steering Gear Part Number: 26044830
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 26035402, 26024892, 26046142
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1996 Chevrolet Lumina | Base, Euro, LS, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

Chevrolet Lumina Rack And Pinion

Want to cut long-term maintenance and repair costs? Choose OEM Rack And Pinion. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Lumina parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Lumina Rack And Pinion includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Rack and Pinion system of the Chevrolet Lumina is a critical gear that immensely contributes to the functionality of the vehicle. This commonly used type is highly accurate and converts the turns of the steering wheel into the sideways movement of the front wheels thanks to the rack and pinion system. Chevrolet Lumina was manufactured between 1989 and 2013 and had applied the power assisted rack and pinion steering in different models aiming at making steering more comfortable; it also was instrumental in increasing overall vehicle efficiency and safety. Lumina comes with this hydraulic system consisting of a cylinder with fluid and piston; hence, it is appreciated by the renters who look for easy maneuverage of the car. Fits different Lumina models guarantee that this rack and pinion is a standard equipment in the Chevrolet line, improving the car handling in generations. First of all, the Chevrolet Lumina Rack And Pinion occupies a rather special place in the car industry because of the solidity of its profiles and the opportunities to reduce a number of wears which is crucial for the proper functioning of the steering mechanism. However, the possibility of leaks or gear wear can occur but, in general mechanical blueprint of the Chevrolet Lumina Rack And Pinion has left it a car model with a solid build. In conclusion, the Chevrolet Lumina Rack And Pinion is not a mere steering assembly part but a major factor in providing the Chevrolet car owners the dependability, efficiency, and security they deserve.

Chevrolet Lumina Rack And Pinion Parts and Q&A

Steering Gear
26055468
Q: How to Replace the Front Rack and Pinion Steering Gear on Chevrolet Lumina?
A:
Before you remove the old Rack And Pinion, raise and support the vehicle and then drain beneath the system to save the present used fluid. To remove the tire and wheel assembly, disconnect the intermediate shaft by the Rack And Pinion stub shaft, in so doing, the damage is avoided; adjust the Steering Shaft so the block tooth is located at the 12 o-clock position and with the wheels pointing straight forward and ignition switch in lock position. Do away with the middle Steering Shaft from the stub shaft and both link ends. Sustain the back of the wire framework with jackstands and eradicate the back construction screws from the back watchfully so as not to dump it excessively low in order to maintain such engine component integrity. Lower the rear of the frame and disconnect the power steering pressure line and return line from the Rack And Pinion. Then remove the Rack And Pinion mounting bolts and nuts, and pull out the Rack And Pinion through the left wheel opening. Installation: fordfestiva Rack And Pinion with the new use replace left wheel with gear mounting bolt and nuts, then tighten to 80 nm (59 ft. Lbs.). Check the threads of the power steering pressure line and return hose fitting and the o-ring seals; replace any damaged ones and lubricate before installation. Install the clamp for the power steering lines, and then connect the power steering pressure line and return line to the Rack And Pinion. Lift up the frame and bolt in new rear frame bolts before taking off the jackstands. Replace the Tie Rod Ends and make sure that the Steering Shaft is placed properly as before. Tighten the intermediate Steering Shaft to the stub shaft and draw it down on the lower pinch bolt at 47nm (35 ft. Lbs.). At last, reassemble the tire and wheel assembly, remove the drain pan, lower the vehicle, and fill the power steering system with fluid, bleed the air off the system, check for leaks, and get an alignment of the front end.