How to service and repair the power steering hose outlet on Chevrolet Malibu?

You should eliminate the intake manifold cover to perform servicing work and repairs on the power steering gear outlet pipe/hose. Get the clamp compressed to remove the power steering reservoir inlet pipe from its connection to the power steering gear outlet pipe . Before beginning service and repair on the power steering gear outlet pipe/hose use proper vehicle elevation and supporting before removing the right front tire and wheel. The service starts with removing both routing pin-style retainers which secure the power steering gear inlet pipe on the RH cradle side and front cradle retainers. The installation task begins with removing the power steering gear inlet/outlet pipe retaining bolt followed by disconnecting the inlet pipe and outlet pipe from the steering gear . Pull out the power steering gear outlet pipe from the vehicle. The Power Steering Gear Oil Seal Remover/Installer tool J 44586 requires use with a flat-bladed tool for extracting the power steering gear oil seal from the power steering gear assembly. Usage of the Power Steering Gear Oil Seal Remover/Installer (J 44586) seal installation end allows you to properly place and correctly set the new power steering gear oil seal inside the power steering gear. Attach the power steering gear outlet pipe to the vehicle before linking the inlet pipe and outlet pipe to the steering gear. Then install and tighten the power steering gear inlet/outlet pipe retaining bolt to 27 N.m (20 lb ft). Fasten the two front and right-hand side power steering gear inlet pipe routing pin-style retainers before installing the right front tire along with its wheel. Once the vehicle is in the appropriate height the clamp should be placed around the power steering gear outlet pipe followed by attaching the gear outlet pipe to the power steering reservoir inlet pipe . The power steering system demands a final step which includes installing the intake manifold cover while filling and bleeding this system.

How to replace the Return Power Steering Hose on Chevrolet Malibu?

The first step to change the power steering return hose starts by removing the Drive Belt from the Power Steering Pump pulley. Start by removing the retainer nut of the Power Steering Hose then take off its retainer before detaching the power steering return hose from the Power Steering Pump. The service technician should raise the vehicle on a hoist while removing the return hose first from the retainer and secondly from the power steering gear before extracting the return hose completely from the vehicle. Installations start with attaching the power steering return hose to the vehicle by maintaining a hose alignment that excludes twists and follows fastening protocol. Screw the return hose into position on the power steering gear at 27 nm torque. Start by attaching the return hose to the retainer and lower the vehicle before connecting the return hose to the Power Steering Pump while tightening the fitting to 27 nm (20 ft. Lbs.). Mount the retainer with its hosed part before tightening the retainer nut up to 5 nm (45 inch lbs.). The Power Steering Hose must have sufficient room from the Exhaust Manifold before reattaching the Drive Belt to the Power Steering Pump pulley. Operators must also perform air bleed operations on the power steering system.

OEM Chevrolet Malibu Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Power Steering Hoses found

View related parts
Chevrolet Malibu Power Steering Pressure Hose Part Number: 19369687
$151.18 MSRP: $247.44
You Save: $96.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Steering Gear Oil Pressure; Power Steering Hose; Pressure Hose; Power Steering Return Hose; Inlet Hose
- Replaces: 15798235, 25864165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Malibu | LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Power Steering Return Hose Part Number: 26055389
$6.47 MSRP: $10.14
You Save: $3.67 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Reservoir Hose; Upper Return Tube; Hose, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Power Steering Return Hose Part Number: 26070058
$41.20 MSRP: $64.55
You Save: $23.35 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
- Replaces: 26068109
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Power Steering Pressure Hose Part Number: 25921081
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Power Steering Cooler Tube; Hose, Steering Gear Oil Return
- Replaces: 15891599, 25853979, 25799112
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Malibu | LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Power Steering Return Hose Part Number: 15942160
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Inlet Hose; Hose, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Outlet Hose Part Number: 15270499
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Power Steering Suction Hose; Hose, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Power Steering Pressure Hose Part Number: 26072757
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26045711
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Malibu | Base | 4 Cyl 2.4 L GAS
View related parts
Chevrolet Malibu Line Kit, Driver Side Part Number: 26053450
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Power Steering Pressure Hose Part Number: 26068979
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26065889
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Power Steering Return Hose Part Number: 26065890
Product Specifications
- Other Name: Hose, Power Steering Gear Outlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Malibu | Base | 4 Cyl 2.4 L GAS
View related parts
Chevrolet Malibu Line Kit, Passenger Side Part Number: 26053451
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Power Steering Return Hose Part Number: 25866941
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Reservoir Hose Part Number: 19303602
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure; Power Steering Hose; Pressure Line; Upper Return Tube; Pipe
- Replaces: 26041998
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Malibu | Base | 4 Cyl 2.4 L GAS
View related parts
Chevrolet Malibu Pressure Tube Part Number: 15944370
Product Specifications
- Other Name: Pipe Kit, Steering Gear; Power Steering Hose; Pipe; Pipe Kit, Steering Gear Oil Pressure
- Replaces: 15267560
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2012 Chevrolet Malibu | LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Pressure Tube Part Number: 15944341
Product Specifications
- Other Name: Pipe Kit, Steering Gear; Power Steering Hose; Pipe; Pipe Kit, Steering Gear Oil Pressure
- Replaces: 15267580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2012 Chevrolet Malibu | LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Power Steering Return Hose Part Number: 15798234
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Reservoir Hose; Return Line; Power Steering Suction Hose; Return Hose; Hose, Steering Gear Oil Return
- Replaces: 15256095
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Malibu | LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Power Steering Return Hose Part Number: 26068108
$107.23 MSRP: $167.96
You Save: $60.73 (37%)
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Malibu | Base | 4 Cyl 2.4 L GAS
View related parts
Chevrolet Malibu Power Steering Pressure Hose Part Number: 22804663
$100.08 MSRP: $156.76
You Save: $56.68 (37%)
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 15942618, 25853997, 25866940, 25809630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | LT, LTZ | 6 Cyl 3.6 L GAS

Chevrolet Malibu Power Steering Hose

Want to cut long-term maintenance and repair costs? Choose OEM Power Steering Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Malibu parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Malibu Power Steering Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Malibu Power Steering Hose is essentially an array, which escalates the steadiness of the Chevrolet power steering facility. This basic hose helps to pump hydraulic fluid between the power steering pump, and the steering gear which enables smooth operation of the steering wheel. Different Malibu generations used different types of Power Steering Hose: high-pressure rubber hose, assemblies with pre-installed metal tubing, compatibility with a large number of Malibu cars. With respect to the importance of the Power Steering Hose, it can be noted that it is a very central element of the vehicle's driving experience; hose leaks or damages can significantly affect driving efficiency and can become a safety issue. Chevrolet has incorporated a favorable design in the Power Steering Hose, particularly in regards to protective couplings and arrangement that stands up to the outside world. This mentality discourages some general problems like wear and tear so the drivers could depend on their smooth-driving Malibu. Further, it can be concluded that Power Steering Hose is instrumental in ensuring constant and efficient flow of the fluid and this makes Malibu exceptional in the market of automobiles. When it comes to the engineering of the Chevrolet Malibu vehicle, one of the most vital elements that customers value is the Power Steering Hose: it ranks among the premier due to the combination of reliable work, high performance, and the compatibility with a wide range of productions of Malibu cars.

Chevrolet Malibu Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
19369687
Q: How to service and repair the power steering hose outlet on Chevrolet Malibu?
A:
You should eliminate the intake manifold cover to perform servicing work and repairs on the power steering gear outlet pipe/hose. Get the clamp compressed to remove the power steering reservoir inlet pipe from its connection to the power steering gear outlet pipe . Before beginning service and repair on the power steering gear outlet pipe/hose use proper vehicle elevation and supporting before removing the right front tire and wheel. The service starts with removing both routing pin-style retainers which secure the power steering gear inlet pipe on the RH cradle side and front cradle retainers. The installation task begins with removing the power steering gear inlet/outlet pipe retaining bolt followed by disconnecting the inlet pipe and outlet pipe from the steering gear . Pull out the power steering gear outlet pipe from the vehicle. The Power Steering Gear Oil Seal Remover/Installer tool J 44586 requires use with a flat-bladed tool for extracting the power steering gear oil seal from the power steering gear assembly. Usage of the Power Steering Gear Oil Seal Remover/Installer (J 44586) seal installation end allows you to properly place and correctly set the new power steering gear oil seal inside the power steering gear. Attach the power steering gear outlet pipe to the vehicle before linking the inlet pipe and outlet pipe to the steering gear. Then install and tighten the power steering gear inlet/outlet pipe retaining bolt to 27 N.m (20 lb ft). Fasten the two front and right-hand side power steering gear inlet pipe routing pin-style retainers before installing the right front tire along with its wheel. Once the vehicle is in the appropriate height the clamp should be placed around the power steering gear outlet pipe followed by attaching the gear outlet pipe to the power steering reservoir inlet pipe . The power steering system demands a final step which includes installing the intake manifold cover while filling and bleeding this system.
Power Steering Return Hose
26055389
Q: How to replace the Return Power Steering Hose on Chevrolet Malibu?
A:
The first step to change the power steering return hose starts by removing the Drive Belt from the Power Steering Pump pulley. Start by removing the retainer nut of the Power Steering Hose then take off its retainer before detaching the power steering return hose from the Power Steering Pump. The service technician should raise the vehicle on a hoist while removing the return hose first from the retainer and secondly from the power steering gear before extracting the return hose completely from the vehicle. Installations start with attaching the power steering return hose to the vehicle by maintaining a hose alignment that excludes twists and follows fastening protocol. Screw the return hose into position on the power steering gear at 27 nm torque. Start by attaching the return hose to the retainer and lower the vehicle before connecting the return hose to the Power Steering Pump while tightening the fitting to 27 nm (20 ft. Lbs.). Mount the retainer with its hosed part before tightening the retainer nut up to 5 nm (45 inch lbs.). The Power Steering Hose must have sufficient room from the Exhaust Manifold before reattaching the Drive Belt to the Power Steering Pump pulley. Operators must also perform air bleed operations on the power steering system.