The replacement process for power steering hoses without hydraulic boost starts with turning off the vehicle and disconnecting both power steering gear inlet or outlet hoses while using plugs or caps to prevent contamination and fluid loss. The first step requires you to disconnect and remove the power steering inlet hose at both the
Power Steering Pump and the power steering gear. The next step involves taking the power steering outlet hose off both the power steering gear and
Power Steering Cooler locations. The installation process begins by joining together the power steering outlet hose to Power Steering Cooler and power steering gear in this order. Complete the connection process starting with the power steering inlet hose that attaches to the power steering gear then moves to the Power Steering Pump while securing all hose points to 28 nm (20 ft. Lbs.). Both bleeding the power steering system and checking all hose connections for possible leaks must be completed.