How to replace the power steering pump on Chevrolet Colorado?

You must uninstall the air cleaner assembly followed by the Drive Belt along with the Power Steering Pump pulley for Power Steering Pump replacement. Disengage the harness clip connecting the oil pressure sensor from the pump body before directing the drain container underneath the vehicle. The first step requires removing the mounting bolts while also disconnecting the power steering pressure hoses from the pump to extract the Power Steering Pump. Place the new Power Steering Pump before securing its mounting bolts while tightening them to 25 nm (18 ft. Lbs.). Secure the drain pan away from the vehicle and fasten power steering pressure hoses using a torque of 25 nm (18 ft. Lbs.). Reinstall the oil pressure sensor harness clip before putting on the Power Steering Pump pulley and Drive Belt followed by the air cleaner assembly. The power steering system requires bleeding followed by a leak inspection before completing the process.

How to replace the power steering pump on Chevrolet S10?

A drain pan should be placed underneath the vehicle before removing the air cleaner assembly for Power Steering Pump replacement. Start by removing the Power Steering Pump pulley followed by disconnecting the power steering pressure hose at the power steering gear and then detaching the power steering cooler hose at the pump. First remove the check valve from the air reactor pipe by disconnecting the tube from the lower reactor tube. Then untighten the air reactor pipe lower retaining nut and extract the pipe from the check valve. Begin by removing the Power Steering Pump filler neck tube mounting bolt and then separate the tube from its installation. Finish by taking off the front mounting bolts of the Power Steering Pump and the power steering rear mounting bracket nut from the engine stud. The accessory mounting bracket needs bolt and nut loosening so you can move the bracket toward the front to extract the Power Steering Pump with its pressure hose from the vehicle while remembering the hose position. The power steering pressure hose should be extracted from the pump location. Fasten the power steering pressure hose to the pump before tightening it to 25 nm (18 ft. Lbs.). The Power Steering Pump and pressure hose must be reinstalled while the mounting bracket needs resetting before securing all mounting bolts and nut at 41 nm (30 ft. Lbs.). First tighten the front mounting bolts to 50 nm (37 ft. Lbs.) while you should attach the rear mounting bracket nut to the engine stud and apply torque force to 41 nm (31 ft. Lbs.). Install the filler neck tube together with its mounting bolt while tightening it to 20 nm (15 ft. Lbs.). The lower secondary air injection reactor pipe needs to be connected to the check valve while the reactor pipe bracket needs mounting to the pump bracket stud followed by securing the mounting bracket retaining nut to 41 nm (31 ft. Lbs.). Proceed with connecting the power steering pressure hose to the gear while simultaneously installing the lower secondary air injection reactor pipe lower connection and the power steering cooler hose to the pump. The conclusion of the installation sequence includes replacing the Power Steering Pump pulley then reattaching the air cleaner assembly while discarding the drain pan to start filling the power steering system followed by bleeding before checking the hose positions relative to frame sections and other components.

OEM Chevrolet Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

171 Power Steering Pumps found

View related parts
Chevrolet Power Steering Pump Part Number: 13577682
$230.53 MSRP: $458.57
You Save: $228.04 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Replaces: 13576573, 13505835, 25950529
Fits the following Chevrolet Models:
- Equinox | 2010-2011 | LT, LTZ | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 13576846
$230.53 MSRP: $458.58
You Save: $228.05 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Power Steering
Fits the following Chevrolet Models:
- Captiva Sport | 2012 | LT, LTZ | 6 Cyl 3.0 L FLEX
View related parts
Chevrolet Power Steering Pump Part Number: 13581202
$269.14 MSRP: $535.44
You Save: $266.30 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Power Steering
- Replaces: 13576847
Fits the following Chevrolet Models:
- Captiva Sport | 2012-2015 | LS, LT, LTZ | 4 Cyl 2.4 L FLEX
View related parts
Chevrolet Power Steering Pump Part Number: 13576570
$203.22 MSRP: $397.83
You Save: $194.61 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Replaces: 13505832, 92237565
Fits the following Chevrolet Models:
- Camaro | 2010-2015 | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 13580490
$221.42 MSRP: $433.47
You Save: $212.05 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
Fits the following Chevrolet Models:
- Equinox | 2011-2017 | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 92267876
$244.38 MSRP: $442.32
You Save: $197.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Power Steering
- Replaces: 92174214, 92260526
Fits the following Chevrolet Models:
- Caprice | 2011-2013 | PPV | 6 Cyl 3.6 L FLEX, 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Power Steering Pump Part Number: 19369078
$225.06 MSRP: $357.32
You Save: $132.26 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Power Steering
- Replaced by: 19433014
Fits the following Chevrolet Models:
- Impala | 2006-2011 | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
- Monte Carlo | 2006-2007 | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 26019743
$220.82 MSRP: $439.59
You Save: $218.77 (50%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
Fits the following Chevrolet Models:
- C30 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- K30 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- R20 | 1987-1988 | Cheyenne, Custom Deluxe, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- R2500 | 1989 | Cheyenne, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- R30 | 1987-1988 | Cheyenne, Custom Deluxe, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- R3500 | 1989-1991 | Cheyenne, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- V30 | 1987-1988 | Cheyenne, Custom Deluxe, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- V3500 | 1989-1991 | Cheyenne, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Power Steering Pump Part Number: 26038948
$247.56 MSRP: $492.86
You Save: $245.30 (50%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
Fits the following Chevrolet Models:
- Beretta | 1994 | Z26 | 4 Cyl 2.3 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 15077397
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Replaces: 15754216, 26068923, 15077366
Fits the following Chevrolet Models:
- Avalanche 1500 | 2002-2003 | Base, North Face, On Road Edition, WBH, Z71 | 8 Cyl 5.3 L GAS
- Avalanche 2500 | 2002 | Base | 8 Cyl 8.1 L GAS
- Silverado 1500 | 1999-2002 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 HD | 2001-2002 | LS, LT | 8 Cyl 6.0 L GAS
- Suburban 1500 | 2000-2002 | Base, LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Tahoe | 2000-2003 | Base, LS, LT, Limited, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Power Steering Pump Part Number: 26043373
Product Specifications
- Other Name: Pump Kit, Power Steering
Fits the following Chevrolet Models:
- S10 | 2001-2003 | Base, LS, Xtreme | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 7838472
Product Specifications
- Other Name: Pump Assembly, Power Steering; Pump; Pump, Power Steering
Fits the following Chevrolet Models:
- Celebrity | 1984-1987 | Base, Classic, Estate, Eurosport | 6 Cyl 2.8 L GAS
- Citation II | 1984-1985 | Base, X-11 | 6 Cyl 2.8 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 19369068
Product Specifications
- Other Name: Pump Kit, Power Steering
- Replaces: 26068936, 26086074
Fits the following Chevrolet Models:
- Camaro | 1998-2002 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 15909829
Product Specifications
- Other Name: Pump Assembly-Power Steering
- Replaced by: 19420678
Fits the following Chevrolet Models:
- Avalanche 2500 | 2002-2006 | Base, LS, LT | 8 Cyl 8.1 L GAS
- Silverado 2500 HD | 2001-2006 | Base, LS, LT, WT | 8 Cyl 8.1 L GAS
- Silverado 3500 | 2001-2006 | Base, LS, LT, WT | 8 Cyl 8.1 L GAS
- Suburban 2500 | 2001-2006 | Base, LS, LT | 8 Cyl 8.1 L GAS
View More
View related parts
Chevrolet Power Steering Pump Part Number: 7839787
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
Fits the following Chevrolet Models:
- El Camino | 1984-1987 | Base, Conquista, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
- Monte Carlo | 1984-1988 | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 25932020
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Replaces: 15867424, 20810993
Fits the following Chevrolet Models:
- Colorado | 2009-2012 | LT | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 20902363
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Replaces: 25803117, 25964298
Fits the following Chevrolet Models:
- Equinox | 2008-2009 | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Power Steering Pump Part Number: 19153684
Product Specifications
- Other Name: Pump Assembly, Power Steering; Pump, Power Steering
- Replaces: 26070099
Fits the following Chevrolet Models:
- Express 2500 | 1999-2002 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- Express 3500 | 1999-2002 | Base, LS | 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
- P30 | 1999 | Base | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Power Steering Pump Part Number: 19153678
Product Specifications
- Other Name: Pump Assembly, Power Steering; Pump, Power Steering
- Replaces: 26037445
Fits the following Chevrolet Models:
- Blazer | 1992-1994 | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS
- C1500 | 1991-1996 | 454 SS, Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C1500 Suburban | 1992-1996 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS
- C2500 | 1991-1996 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1996 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS
- C3500 | 1991-1996 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
- K1500 | 1991-1996 | Base, Cheyenne, Scottsdale, Silverado, Sport, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- K1500 Suburban | 1992-1996 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS
- K2500 | 1991-1996 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1996 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Power Steering Pump Part Number: 26081600
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Replaces: 26040444
Fits the following Chevrolet Models:
- Camaro | 1995-2002 | Base, RS | 6 Cyl 3.8 L GAS

| Page 1 of 9 |Next >

1-20 of 171 Results

Chevrolet Power Steering Pump

Choose OEM Power Steering Pump, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Power Steering Pump. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Power Steering Pump converts engine rotating to hydraulic muscle such that steering by the driver takes minimum effort. Chevrolet created its image combining simple engineering with everyday practicality and supporting it with solid performance. The range stretches between agile sedans and heavy trucks, but all Chevy models retain cabin control that is easy to use and ride qualities that can be forgiven. Long highway deliveries are not as exhausting as Chevy invests in the comfort of the seats, silencing needs and smooth tuning of the suspension. Technology like Super Cruise digital conveniences can demonstrate that Chevrolet is driving driver technology without overwhelming owners with intricate menus. In the course of the last hundred years, Chevy has been guided by a straightforward promise; create a car that common people can afford, have faith in, and can in fact enjoy using in everyday life. The bowtie badge makes people anticipate work-ready machines that are at the same time friendly. The Power Steering Pump is attached to the part belt and empties on the steering gear inside the hydraulic circuit, forcing the liquid on its way to the steering gear and multiplying the effort of the driver. The hydraulic push by the pump on spinning the wheel cuts steering effort so that after a day of running errands, arms remain fresh. In case of leaking or whining of the Power Steering Pump, turning becomes cumbersome and wandering begins; this means that the obstacles are felt and trouble is detected early by the drivers. The contemporary variants may be differentiated to provide assistance with electronic control, which provides light touch in town and more serious response on asphalt. The unit remains small, belt driven and compatible with all cars or trucks in the line and provides the same crisp feel.

Chevrolet Power Steering Pump Parts and Q&A

Power Steering Pump
19369081
Q: How to replace the power steering pump on Chevrolet Colorado?
A:
You must uninstall the air cleaner assembly followed by the Drive Belt along with the Power Steering Pump pulley for Power Steering Pump replacement. Disengage the harness clip connecting the oil pressure sensor from the pump body before directing the drain container underneath the vehicle. The first step requires removing the mounting bolts while also disconnecting the power steering pressure hoses from the pump to extract the Power Steering Pump. Place the new Power Steering Pump before securing its mounting bolts while tightening them to 25 nm (18 ft. Lbs.). Secure the drain pan away from the vehicle and fasten power steering pressure hoses using a torque of 25 nm (18 ft. Lbs.). Reinstall the oil pressure sensor harness clip before putting on the Power Steering Pump pulley and Drive Belt followed by the air cleaner assembly. The power steering system requires bleeding followed by a leak inspection before completing the process.
Power Steering Pump
26043373
Q: How to replace the power steering pump on Chevrolet S10?
A:
A drain pan should be placed underneath the vehicle before removing the air cleaner assembly for Power Steering Pump replacement. Start by removing the Power Steering Pump pulley followed by disconnecting the power steering pressure hose at the power steering gear and then detaching the power steering cooler hose at the pump. First remove the check valve from the air reactor pipe by disconnecting the tube from the lower reactor tube. Then untighten the air reactor pipe lower retaining nut and extract the pipe from the check valve. Begin by removing the Power Steering Pump filler neck tube mounting bolt and then separate the tube from its installation. Finish by taking off the front mounting bolts of the Power Steering Pump and the power steering rear mounting bracket nut from the engine stud. The accessory mounting bracket needs bolt and nut loosening so you can move the bracket toward the front to extract the Power Steering Pump with its pressure hose from the vehicle while remembering the hose position. The power steering pressure hose should be extracted from the pump location. Fasten the power steering pressure hose to the pump before tightening it to 25 nm (18 ft. Lbs.). The Power Steering Pump and pressure hose must be reinstalled while the mounting bracket needs resetting before securing all mounting bolts and nut at 41 nm (30 ft. Lbs.). First tighten the front mounting bolts to 50 nm (37 ft. Lbs.) while you should attach the rear mounting bracket nut to the engine stud and apply torque force to 41 nm (31 ft. Lbs.). Install the filler neck tube together with its mounting bolt while tightening it to 20 nm (15 ft. Lbs.). The lower secondary air injection reactor pipe needs to be connected to the check valve while the reactor pipe bracket needs mounting to the pump bracket stud followed by securing the mounting bracket retaining nut to 41 nm (31 ft. Lbs.). Proceed with connecting the power steering pressure hose to the gear while simultaneously installing the lower secondary air injection reactor pipe lower connection and the power steering cooler hose to the pump. The conclusion of the installation sequence includes replacing the Power Steering Pump pulley then reattaching the air cleaner assembly while discarding the drain pan to start filling the power steering system followed by bleeding before checking the hose positions relative to frame sections and other components.