How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet Colorado?

Service the Valve Stem Oil Seal while you replace both the Valve Stem Oil Seal and valve spring by starting with a vehicle lift. Slide out the service slot plug then fasten the en 46547 (Flywheel Holding Tool) onto Flywheel teeth before setting the vehicle down. Start by taking off both camshafts plus spark plugs. Position the j-44228-a base plate over the cylinder Spark Plug hole for the service. Insert the j 39313 Spark Plug adapter into the hole then apply steady air pressure to seal the valve. Put the j-44228-a arm assembly over the appropriate stud while handling the strong valve spring compression force. The swivel nut should be tightened lightly to expose valve locks that can be picked off with a magnet. Use the swivel nut tool to loosen the device and redirect the arm to remove both valve spring parts. Push and turn the j 38820 valve stem seal installer to take out the old Valve Stem Oil Seal. Apply engine oil to the valve stem and insert the new seal through the j 38820 before pushing and twisting to install it correctly. Reposition the valve locks by using the j 43059 tool after you tighten the swivel nut only enough for the valve locks access and place the valve spring and valve spring retainer back. Take off the swivel nut and arm of the j-44228-a following this order for any other valve in the cylinder. Lower total system pressure before taking out the j 39313 Spark Plug tool from the hole and removing the j-44228-a base plate. Service all cylinders this way then put back the spark plugs and camshafts. Lower the vehicle while placing the service plug in position then take off the en 46547 tool from the Flywheel teeth before returning the vehicle to its original position.

How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet S10?

Start with taking off the valve Rocker Arm cover then dislodging the required valve rocker arms and spark plugs before servicing the Valve Stem Oil Seal. Push the Spark Plug port adapter (part J 22794) into the Spark Plug opening and connect a shop air supply hose. The valve positions remain stable when you deliver compressed air through the supply hose. Install a valve spring bolt into its respective valve Rocker Arm hole after adding a smooth washer onto the bolt for the valve spring that needs to be removed. Treat the process with care since valve springs under pressure exert strong force. Twist the valve spring compressor j 5892-d onto the washer under the valve Rocker Arm bolt while keeping steady pressure until you reach the valve keys. When full valve spring tension is not achievable through the j 38606 tool set it to the j 5892-d instead. Free the valve spring tension and take off the spring cap after releasing the valve keys using the relevant tool. Place the valve in its right location and put the correct Valve Stem Oil Seal into the valve guide. Apply clean engine oil to the valve guide and seal before using the valve stem seal installer (J 42073) to install the seal on the valve guide. Keep the bottom edge of the Valve Stem Oil Seal around 1 - 2 millimeters away from the valve guide surface. Place the valve spring and cap into position after compressing it with j 5892-d or j 38606 as needed. Put the valve stem o-rings and valves keys on using grease to set them correctly before carefully taking the valve spring pressure off. Eliminate the j 5892-d or j 38606 then inspect the valve stem keys to ensure proper alignment before performing a gentle tap with a plastic hammer's end. Afterwards disconnect the Spark Plug port adapter (J 22794) and reinstall all pieces in the valve assembly.

OEM Chevrolet Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

79 Valve Stem Oil Seals found

View related parts
Chevrolet Valve Seals Part Number: 9158057
$5.61 MSRP: $8.79
You Save: $3.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal A-Stem, Valve Dichtung Z-Sch; Valve Stem Seal; Seal, Engine Valve
Fits the following Chevrolet Models:
- Cruze | 2011-2015 | Eco, LT, LTZ | 4 Cyl 1.4 L GAS
- Cruze Limited | 2016 | Eco, LT, LTZ | 4 Cyl 1.4 L GAS
- Sonic | 2012-2020 | LS, LT, LTZ, Premier, RS | 4 Cyl 1.4 L GAS
- Trax | 2015-2021 | LS, LT, LTZ, Premier | 4 Cyl 1.4 L GAS
- Volt | 2011-2015 | Base | 4 Cyl 1.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Chevrolet Valve Seals Part Number: 12457652
$18.85 MSRP: $29.92
You Save: $11.07 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Replaces: 12560189
Fits the following Chevrolet Models:
- Camaro | 1998-2001 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
- Corvette | 1997-2001 | Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
- Silverado 1500 | 1999-2000 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
- Silverado 2500 | 1999-2000 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Suburban 1500 | 2000 | Base, LS, LT | 8 Cyl 5.3 L GAS
- Suburban 2500 | 2000 | Base, LS, LT | 8 Cyl 6.0 L GAS
- Tahoe | 2000 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Valve Seals Part Number: 12689007
$5.40 MSRP: $8.46
You Save: $3.06 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 12645473
Fits the following Chevrolet Models:
- Camaro | 2016-2022 | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS
- Corvette | 2014-2023 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
- Express 2500 | 2018-2023 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
- Express 3500 | 2018-2023 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
- Silverado 1500 | 2014-2023 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 2500 HD | 2020-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Suburban | 2015-2022 | Commercial, High Country, LS, LT, LTZ, Premier, RST, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Tahoe | 2015-2022 | Commercial, High Country, LS, LT, LTZ, PPV, Premier, RST, SSV, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
Chevrolet Valve Seals Part Number: 12653350
$4.87 MSRP: $7.73
You Save: $2.86 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Camaro | 2016-2022 | LS, LT | 4 Cyl 2.0 L GAS
- Equinox | 2018-2020 | LT, Premier | 4 Cyl 2.0 L GAS
- Malibu | 2013-2022 | LS, LT, LTZ, Premier | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
- Traverse | 2018-2019 | RS | 4 Cyl 2.0 L GAS
View More
View related parts
Chevrolet Valve Seals Part Number: 12693552
$23.00 MSRP: $37.89
You Save: $14.89 (40%)
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Colorado | 2023 | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
- Silverado 1500 | 2019-2023 | Custom, Custom Trail Boss, LT, LT Trail Boss, RST, WT | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Valve Seals Part Number: 94859225
$10.63 MSRP: $16.66
You Save: $6.03 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Prizm | 1998-2002 | Base, LSi | 4 Cyl 1.8 L GAS
View related parts
Chevrolet Valve Seals, Silver Part Number: 24508663
$16.40 MSRP: $25.69
You Save: $9.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Camaro | 1995-2000 | Base, RS | 6 Cyl 3.8 L GAS
- Lumina | 1998-1999 | Base, LS, LTZ | 6 Cyl 3.8 L GAS
- Monte Carlo | 1998-1999 | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View More
View related parts
Chevrolet Valve Seals Part Number: 12633926
$4.94 MSRP: $7.73
You Save: $2.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2017-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2017-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Valve Seals Part Number: 96840122
$2.81 MSRP: $4.42
You Save: $1.61 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 96353035
Fits the following Chevrolet Models:
- Aveo | 2004-2008 | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
- Aveo5 | 2007-2008 | LS, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Valve Seals Part Number: 55569928
$4.94 MSRP: $7.73
You Save: $2.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Cruze | 2017-2019 | Diesel, LT | 4 Cyl 1.6 L DIESEL
- Equinox | 2018-2019 | LT, Premier | 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Valve Seals Part Number: 55595873
$3.07 MSRP: $4.80
You Save: $1.73 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Malibu | 2016-2019 | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Valve Seals Part Number: 88891780
$5.86 MSRP: $9.67
You Save: $3.81 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals; Intake Valve Seals
- Replaces: 10166368
Fits the following Chevrolet Models:
- Beretta | 1994-1996 | Base, Z26 | 6 Cyl 3.1 L GAS
- Corsica | 1994-1996 | Base | 6 Cyl 3.1 L GAS
- Lumina | 1995-1999 | Base, LS, LTZ | 6 Cyl 3.1 L GAS
- Lumina APV | 1996 | Base, LS | 6 Cyl 3.4 L GAS
- Malibu | 1997-1999 | Base, LS | 6 Cyl 3.1 L GAS
- Monte Carlo | 1995-1999 | LS | 6 Cyl 3.1 L GAS
- Venture | 1997-1999 | Base, LS | 6 Cyl 3.4 L GAS
View More
View related parts
Chevrolet Valve Seals Part Number: 90215296
$4.35 MSRP: $7.16
You Save: $2.81 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 94656542
Fits the following Chevrolet Models:
- Cavalier | 1987-1989 | Base, CS, RS, VL | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Valve Seals Part Number: 12668542
$4.91 MSRP: $8.10
You Save: $3.19 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve
Fits the following Chevrolet Models:
- Corvette | 2023 | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Valve Seals Part Number: 12574354
$7.49 MSRP: $11.74
You Save: $4.25 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 24100293, 12553354
Fits the following Chevrolet Models:
- Trailblazer | 2002-2005 | LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
- Trailblazer EXT | 2002-2005 | LS, LT, North Face | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Valve Seals Part Number: 19316207
$3.05 MSRP: $4.85
You Save: $1.80 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- City Express | 2015-2018 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Valve Seals, Silver Part Number: 88891774
$5.70 MSRP: $8.93
You Save: $3.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Intake Valve Seals
- Replaces: 24502713, 24507690
Fits the following Chevrolet Models:
- Camaro | 1995-2002 | Base, RS | 6 Cyl 3.8 L GAS
- Impala | 2000-2005 | Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS
- Lumina | 1998-1999 | Base, LS, LTZ | 6 Cyl 3.8 L GAS
- Monte Carlo | 1998-2005 | Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View More
View related parts
Chevrolet Valve Seals Part Number: 12673942
$2.61 MSRP: $4.10
You Save: $1.49 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Trailblazer | 2021-2022 | ACTIV, LS, LT, RS | 3 Cyl 1.3 L GAS
View related parts
Chevrolet Valve Seals Part Number: 12596995
$9.24 MSRP: $14.47
You Save: $5.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Colorado | 2007-2012 | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
- Trailblazer | 2006-2009 | Base, LS, LT | 6 Cyl 4.2 L GAS
- Trailblazer EXT | 2006 | LS, LT | 6 Cyl 4.2 L GAS
View More
View related parts
Chevrolet Valve Seals Part Number: 24508009
$7.09 MSRP: $11.10
You Save: $4.01 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
Fits the following Chevrolet Models:
- Equinox | 2006-2009 | LS, LT, LTZ | 6 Cyl 3.4 L GAS
- Impala | 2000-2005 | Base | 6 Cyl 3.4 L GAS
- Malibu | 2000-2006 | Base, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.5 L GAS
- Monte Carlo | 2000-2005 | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
- Uplander | 2005-2006 | Base, LS, LT | 6 Cyl 3.5 L GAS
- Venture | 2000-2005 | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View More

| Page 1 of 4 |Next >

1-20 of 79 Results

Chevrolet Valve Stem Oil Seal

Choose OEM Valve Stem Oil Seal, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Valve Stem Oil Seal. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Valve Stem Oil Seal Parts and Q&A

Valve Seals
12482063
Q: How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet Colorado?
A:
Service the Valve Stem Oil Seal while you replace both the Valve Stem Oil Seal and valve spring by starting with a vehicle lift. Slide out the service slot plug then fasten the en 46547 (Flywheel Holding Tool) onto Flywheel teeth before setting the vehicle down. Start by taking off both camshafts plus spark plugs. Position the j-44228-a base plate over the cylinder Spark Plug hole for the service. Insert the j 39313 Spark Plug adapter into the hole then apply steady air pressure to seal the valve. Put the j-44228-a arm assembly over the appropriate stud while handling the strong valve spring compression force. The swivel nut should be tightened lightly to expose valve locks that can be picked off with a magnet. Use the swivel nut tool to loosen the device and redirect the arm to remove both valve spring parts. Push and turn the j 38820 valve stem seal installer to take out the old Valve Stem Oil Seal. Apply engine oil to the valve stem and insert the new seal through the j 38820 before pushing and twisting to install it correctly. Reposition the valve locks by using the j 43059 tool after you tighten the swivel nut only enough for the valve locks access and place the valve spring and valve spring retainer back. Take off the swivel nut and arm of the j-44228-a following this order for any other valve in the cylinder. Lower total system pressure before taking out the j 39313 Spark Plug tool from the hole and removing the j-44228-a base plate. Service all cylinders this way then put back the spark plugs and camshafts. Lower the vehicle while placing the service plug in position then take off the en 46547 tool from the Flywheel teeth before returning the vehicle to its original position.
Valve Seals
10212810
Q: How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet S10?
A:
Start with taking off the valve Rocker Arm cover then dislodging the required valve rocker arms and spark plugs before servicing the Valve Stem Oil Seal. Push the Spark Plug port adapter (part J 22794) into the Spark Plug opening and connect a shop air supply hose. The valve positions remain stable when you deliver compressed air through the supply hose. Install a valve spring bolt into its respective valve Rocker Arm hole after adding a smooth washer onto the bolt for the valve spring that needs to be removed. Treat the process with care since valve springs under pressure exert strong force. Twist the valve spring compressor j 5892-d onto the washer under the valve Rocker Arm bolt while keeping steady pressure until you reach the valve keys. When full valve spring tension is not achievable through the j 38606 tool set it to the j 5892-d instead. Free the valve spring tension and take off the spring cap after releasing the valve keys using the relevant tool. Place the valve in its right location and put the correct Valve Stem Oil Seal into the valve guide. Apply clean engine oil to the valve guide and seal before using the valve stem seal installer (J 42073) to install the seal on the valve guide. Keep the bottom edge of the Valve Stem Oil Seal around 1 - 2 millimeters away from the valve guide surface. Place the valve spring and cap into position after compressing it with j 5892-d or j 38606 as needed. Put the valve stem o-rings and valves keys on using grease to set them correctly before carefully taking the valve spring pressure off. Eliminate the j 5892-d or j 38606 then inspect the valve stem keys to ensure proper alignment before performing a gentle tap with a plastic hammer's end. Afterwards disconnect the Spark Plug port adapter (J 22794) and reinstall all pieces in the valve assembly.