How to service and repair the Valve Stem Oil Seal on Chevrolet Monte Carlo?

Before working on the Valve Stem Oil Seal you must position the Piston at top dead center (TDC) to keep the valve from entering the cylinder space. Remove the Spark Plug part and wipe dirt from its holding spot before taking it out. Insert the j 22794 Spark Plug port adapter into the Spark Plug port while compressed air keeps the valves secure. Prepare your project by putting the spring inside the j 38606 valve spring compressor (J 38606). Then take off all valve parts including the oil seal to view the spring for wear. Put the new Valve Stem Oil Seal correctly before fitting the valve spring and valve cap together. Use the j 38606 to compress the valve spring then apply the valve locks with grease where needed before letting go of the spring pressure. Position the valve locks before letting the built-up air pressure out through the Spark Plug port with the j 22794. To finish install both the Rocker Arm and the Spark Plug.

How to replace the Rocker Shaft Spring Kit and valve stem oil seal on Chevrolet Monte Carlo?

Before you work on fitting a new valve stem oil seal and spring you must first take off the valve Rocker Arm cover set. First remove the Rocker Arm cover then take out the Rocker Arm and push rod before working on the Spark Plug. Insert the j 23590 (Spark Plug Port Adapter) into its place and use a compressed air tool to stop valves from moving. Set the j 38606 (Valve Spring Compressor) to the valve spring and actuate it. You must first release its locks before pulling out the valve spring and cap and then removing the valve stem oil seal. Check for damages on the valve spring such as bends, cracks or breaks and order a replacement part if needed. Begin by placing the oil seal onto the stem until it touches the valve guide. Do not exert excessive force as this can harm the components. Drive the j 42863 valve stem seal installation tool onto the valve guide until it reaches the valve spring seating. Return the j 38606 to its placement on the valve spring while holding it compressed. Set the valve assembly in place beginning from the valve spring to locks making sure all components properly interact. Lower the valve spring then lower the air pressure while pulling out the j 23590 tool. Put the Spark Plug back while placing the push rod then valve Rocker Arm and valve Rocker Arm cover into position.

OEM Chevrolet Monte Carlo Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Valve Stem Oil Seals found

View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 12482063
$38.31 MSRP: $63.11
You Save: $24.80 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 12482062
$42.00 MSRP: $69.18
You Save: $27.18 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal; Valve Spring; Valve Springs
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 10212810
$5.08 MSRP: $7.97
You Save: $2.89 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Valve Seal Kit
- Replaces: 00460483, 460483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals, Bronze Part Number: 88891775
$13.11
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals
- Replaces: 24507691
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 22531217
$0.18 MSRP: $0.28
You Save: $0.10 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 10131082
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 88891780
$5.86 MSRP: $9.67
You Save: $3.81 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals; Intake Valve Seals
- Replaces: 10166368
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals, Silver Part Number: 88891774
$5.70 MSRP: $8.93
You Save: $3.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Intake Valve Seals
- Replaces: 24502713, 24507690
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals, Bronze Part Number: 24508664
$16.40 MSRP: $25.69
You Save: $9.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals, Silver Part Number: 24508663
$16.40 MSRP: $25.69
You Save: $9.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 24508009
$7.09 MSRP: $11.10
You Save: $4.01 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 25535162
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Intake Valve Seals
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 25519324
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet Monte Carlo | Base, LS | 6 Cyl 4.3 L GAS

Chevrolet Monte Carlo Valve Stem Oil Seal

Want to cut long-term maintenance and repair costs? Choose OEM Valve Stem Oil Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Valve Stem Oil Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Monte Carlo Valve Stem Oil Seal Parts and Q&A

Valve Seals
24508009
Q: How to service and repair the Valve Stem Oil Seal on Chevrolet Monte Carlo?
A:
Before working on the Valve Stem Oil Seal you must position the Piston at top dead center (TDC) to keep the valve from entering the cylinder space. Remove the Spark Plug part and wipe dirt from its holding spot before taking it out. Insert the j 22794 Spark Plug port adapter into the Spark Plug port while compressed air keeps the valves secure. Prepare your project by putting the spring inside the j 38606 valve spring compressor (J 38606). Then take off all valve parts including the oil seal to view the spring for wear. Put the new Valve Stem Oil Seal correctly before fitting the valve spring and valve cap together. Use the j 38606 to compress the valve spring then apply the valve locks with grease where needed before letting go of the spring pressure. Position the valve locks before letting the built-up air pressure out through the Spark Plug port with the j 22794. To finish install both the Rocker Arm and the Spark Plug.
Valve Seals, Silver
88891774
Q: How to replace the Rocker Shaft Spring Kit and valve stem oil seal on Chevrolet Monte Carlo?
A:
Before you work on fitting a new valve stem oil seal and spring you must first take off the valve Rocker Arm cover set. First remove the Rocker Arm cover then take out the Rocker Arm and push rod before working on the Spark Plug. Insert the j 23590 (Spark Plug Port Adapter) into its place and use a compressed air tool to stop valves from moving. Set the j 38606 (Valve Spring Compressor) to the valve spring and actuate it. You must first release its locks before pulling out the valve spring and cap and then removing the valve stem oil seal. Check for damages on the valve spring such as bends, cracks or breaks and order a replacement part if needed. Begin by placing the oil seal onto the stem until it touches the valve guide. Do not exert excessive force as this can harm the components. Drive the j 42863 valve stem seal installation tool onto the valve guide until it reaches the valve spring seating. Return the j 38606 to its placement on the valve spring while holding it compressed. Set the valve assembly in place beginning from the valve spring to locks making sure all components properly interact. Lower the valve spring then lower the air pressure while pulling out the j 23590 tool. Put the Spark Plug back while placing the push rod then valve Rocker Arm and valve Rocker Arm cover into position.