How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on 2004 Chevrolet Monte Carlo?

You must position the Piston at top dead center (TDC) to avoid letting the valve drop into the cylinder prior to changing the Valve Stem Oil Seal and both valve guide seal and valve spring. Start by removing the Spark Plug then cleaning around the Spark Plug valve area. Push the Spark Plug port adapter (Part J 22794) into the spark port opening until you can use compressed air to keep the valves secure. Put the valve spring compressor j 38606 on the valve spring to loosen valve locks, then remove valve cap, valve spring, and valve guide seal for inspection. Put the new valve guide seal into its seat and layer on the valve spring and valve cap on top. Use the valve spring compressor (J 38606) to compress the valve spring then install the valve locks into position with the help of grease when needed. Separate the valve spring and make sure the locking mechanism sits correctly. Following that disconnect the Spark Plug port adapter (J 22794) and put back the Rocker Arm along with the Spark Plug.

OEM 2004 Chevrolet Monte Carlo Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Valve Stem Oil Seals found

View related parts
2004 Chevrolet Monte Carlo Valve Seals Part Number: 24508009
$7.09 MSRP: $11.10
You Save: $4.01 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.7 x 2.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24508009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
2004 Chevrolet Monte Carlo Valve Seals, Silver Part Number: 88891774
$5.70 MSRP: $8.93
You Save: $3.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Intake Valve Seals
- Replaces: 24502713, 24507690
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 1.5 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 88891774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2004 Chevrolet Monte Carlo Valve Seals, Bronze Part Number: 88891775
$13.11
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals
- Replaces: 24507691
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.0 x 3.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88891775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
- Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS

2004 Chevrolet Monte Carlo Valve Stem Oil Seal

With a comprehensive array of OEM 2004 Chevrolet Monte Carlo Valve Stem Oil Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Monte Carlo Valve Stem Oil Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Monte Carlo Valve Stem Oil Seal Parts and Q&A

Q: How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on 2004 Chevrolet Monte Carlo?
A: You must position the Piston at top dead center (TDC) to avoid letting the valve drop into the cylinder prior to changing the Valve Stem Oil Seal and both valve guide seal and valve spring. Start by removing the Spark Plug then cleaning around the Spark Plug valve area. Push the Spark Plug port adapter (Part J 22794) into the spark port opening until you can use compressed air to keep the valves secure. Put the valve spring compressor j 38606 on the valve spring to loosen valve locks, then remove valve cap, valve spring, and valve guide seal for inspection. Put the new valve guide seal into its seat and layer on the valve spring and valve cap on top. Use the valve spring compressor (J 38606) to compress the valve spring then install the valve locks into position with the help of grease when needed. Separate the valve spring and make sure the locking mechanism sits correctly. Following that disconnect the Spark Plug port adapter (J 22794) and put back the Rocker Arm along with the Spark Plug.