How to remove and install Lash Adjuster in V6 engine on Chevrolet Beretta?

There are various methods that can be employed to diagnose a noisy Lash Adjuster. To start with, you can listen at the other side near the valve locations using a mechanic's stethoscope or a length of hose while the engine is idling in order to locate a noisy Lash Adjuster. Another way involves removal of the rocker arm cover and touching each valve spring retainer one at a time with an idling engine. If one of the Lash Adjusters is bad, you will feel a noticeable shock in the retainer every time the valve seats. Some common causes for noisy Lash Adjusters include dirt in the Lash Adjuster and problems related to oil flow, viscosity or pressure. There are few things that need to be done before making any conclusions about the problematic Lash Adjusters. Firstly, it is necessary to inspect the engine oil for fuel contamination; ensure that it's at proper level; clean and with proper viscosity. For removal, start by removing intake manifold and rocker arm cover(s). After that remove rocker arms and pushrods. If your engine has roller Lash Adjusters (1994 and newer models), also remove lifter guide. Different methods can be used to get out the Lash Adjusters from their bores. However, in some cases, you may not have to use this special tool made for this purpose. In newer engines without significant varnish buildup, Lash Adjusters can often be removed using a small magnet or even your fingers. Use a machinist's scribe with one end bent as an alternative method of pulling them out by placing its point under the retainer ring on top of each Lash Adjuster. Lash Adjuster removal should avoid using pliers unless they will be replaced as pliers can damage precision machined and hardened Lash Adjusters.Try not to forget that before removing them carefully place them in a well labeled container to make sure that they are reinstalled in their original positions later on since some engines may have both standard and 0.010-inch oversize Lash Adjusters installed at the factory, which are marked by a drop of white paint and a 0.25 (mm) OS stamp on them. As for inspection and installation, you should remember that Lash Adjuster parts cannot be sold separately. The Lash Adjusters have to be replaced with new ones if they are worn out; in case you have conventional Lash Adjusters in your engine, camshaft should also be replaced. It is important never to mix used conventional Lash Adjusters with a new camshaft or new conventional Lash Adjusters with a used camshaft. Nevertheless, used roller Lash Adjusters can be reinstalled with a new camshaft, and the original camshaft can be used if new roller Lash Adjusters are installed provided that the used parts are in good condition. Whenever you are reinstalling used Lash Adjusters ensure that they are put back to their original bores, soak new Lash Adjusters in oil to release any air pockets trapped within them, also coat all Lash Adjuster bottoms with moly-base grease or engine assembly lube prior to installing them. Remaining installation steps must now be done in reverse order while for those installing roller Lash Adjusters make sure the lifter guide bolts are properly tightened. Lastly start up the engine and look out for any oil leaks.

OEM Chevrolet Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Lash Adjusters found

View related parts
Chevrolet Valve Lifters Part Number: 12690246
$5.94 MSRP: $9.79
You Save: $3.85 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster Assembly-Dual Feed Hydraulic Valve Lash; Valve Lifter; Adjuster, Engine Valve Lifter
- Replaces: 12640506, 12659430
Fits the following Chevrolet Models:
- Camaro | 2016-2022 | LS, LT | 6 Cyl 3.6 L GAS
- Colorado | 2015-2022 | LT, WT, Z71, ZR2 | 6 Cyl 3.6 L GAS
- Impala | 2014-2015 | LS, LT, LTZ | 4 Cyl 2.5 L GAS
- Malibu | 2013-2015 | LS, LT, LTZ | 4 Cyl 2.5 L GAS
View More
View related parts
Chevrolet Valve Lifters Part Number: 24438041
$4.87 MSRP: $7.74
You Save: $2.87 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Valve Lifter
Fits the following Chevrolet Models:
- Aveo | 2009-2011 | LS, LT | 4 Cyl 1.6 L GAS
- Aveo5 | 2009-2011 | LS, LT | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 96376400
$17.43 MSRP: $27.66
You Save: $10.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter, Engine Valve Lifter
- Replaced by: 96376362
Fits the following Chevrolet Models:
- Aveo | 2004-2008 | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
- Aveo5 | 2007-2008 | LS, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 19317155
$16.62 MSRP: $26.39
You Save: $9.77 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Valve Lifter
Fits the following Chevrolet Models:
- City Express | 2015-2018 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 12663277
$2.74 MSRP: $4.52
You Save: $1.78 (40%)
ADD TO CART
Product Specifications
- Other Name: Adjuster-Hydraulic Valve Lash; Valve Lifter; Adjuster, Engine Valve Lifter; Adjuster, Engine Valve
Fits the following Chevrolet Models:
- Colorado | 2023 | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
- Silverado 1500 | 2019-2023 | Custom, Custom Trail Boss, LT, LT Trail Boss, RST, WT | 4 Cyl 2.7 L GAS
- Trailblazer | 2021-2022 | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View More
View related parts
Chevrolet Valve Lifters Part Number: 19318189
$20.21 MSRP: $33.30
You Save: $13.09 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter Assembly, Valve; Valve Lifter; Lifter, Engine Valve Lifter
- Replaces: 19317166
Fits the following Chevrolet Models:
- City Express | 2015-2018 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 97188458
$41.29 MSRP: $70.30
You Save: $29.01 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter Assembly, Valve
- Replaced by: 97325546
Fits the following Chevrolet Models:
- Express 2500 | 2006-2016 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
- Express 3500 | 2006-2016 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
- Silverado 2500 HD | 2001-2016 | Base, High Country, LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 2500 HD Classic | 2007 | LS, LT, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 | 2001-2006 | Base, LS, LT, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 Classic | 2007 | LS, LT, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2007-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View More
View related parts
Chevrolet Valve Lifters Part Number: 12670435
$9.18 MSRP: $14.58
You Save: $5.40 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter Assembly-Valve; Valve Lifter; Lifter, Engine Valve Lifter; Lifter, Engine Valve
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2017-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2017-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Valve Lifters Part Number: 55569933
$3.06 MSRP: $5.04
You Save: $1.98 (40%)
ADD TO CART
Product Specifications
- Other Name: Lifter Assembly-Valve; Valve Lifter; Adjuster, Engine Valve Lifter; Lifter, Engine Valve Lifter
- Replaces: 12855340
Fits the following Chevrolet Models:
- Cruze | 2017-2019, 2014-2015 | Diesel, LT | 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L DIESEL
- Equinox | 2018-2019 | LT, Premier | 4 Cyl 1.6 L DIESEL
- Silverado 1500 | 2020-2023 | Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST | 6 Cyl 3.0 L DIESEL
- Suburban | 2021-2022 | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
- Tahoe | 2021-2022 | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
View More
View related parts
Chevrolet Valve Lifters Part Number: 17120735
$38.49 MSRP: $60.30
You Save: $21.81 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Valve Lifter
Fits the following Chevrolet Models:
- C1500 | 1996-1999 | Base, Cheyenne, LS, Silverado, WT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C1500 Suburban | 1996-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS
- C2500 | 1996-2000 | Base, Cheyenne, LS, Silverado, WT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
- C2500 Suburban | 1996-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS
- C3500 | 1996-2000 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
- Camaro | 1996-1997 | Z28 | 8 Cyl 5.7 L GAS
- Corvette | 1996 | Base | 8 Cyl 5.7 L GAS
- Express 1500 | 1996-2002 | Base, LS, LT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Express 2500 | 1996-2002 | Base, LS | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
- Express 3500 | 1996-2002 | Base, LS | 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Valve Lifters Part Number: 5234200
$13.24 MSRP: $21.24
You Save: $8.00 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Lift; Valve Lifter; Lifter, Engine Valve Lifter; Lifter, Engine Valve
Fits the following Chevrolet Models:
- C1500 | 1992-1993 | 454 SS, Cheyenne, Silverado, WT | 8 Cyl 7.4 L GAS
- C2500 | 1992-1995 | Base, Cheyenne, Scottsdale, Silverado, WT | 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1995 | Base, LS, LT, Silverado | 8 Cyl 7.4 L GAS
- C3500 | 1992-1995 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- Celebrity | 1984 | Base, Eurosport | 4 Cyl 2.5 L GAS
- Citation II | 1984 | Base, X-11 | 4 Cyl 2.5 L GAS
- G30 | 1992-1996 | Beauville, Chevy Van, Hi-Cube, Sportvan | 8 Cyl 7.4 L GAS
- K2500 | 1992-1995 | Base, Cheyenne, Scottsdale, Silverado, WT | 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1995 | Base, LS, LT, Silverado | 8 Cyl 7.4 L GAS
- K3500 | 1992-1995 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Valve Lifters Part Number: 17121905
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Valve Lifter
Fits the following Chevrolet Models:
- Camaro | 1995-1998 | Base, RS | 6 Cyl 3.8 L GAS
- Lumina | 1998 | LS, LTZ | 6 Cyl 3.8 L GAS
- Monte Carlo | 1998 | Z34 | 6 Cyl 3.8 L GAS
View More
View related parts
Chevrolet Valve Lifters Part Number: 94858910
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Valve Lifter
Fits the following Chevrolet Models:
- Prizm | 1998-2002 | Base, LSi | 4 Cyl 1.8 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 25199851
Product Specifications
- Other Name: Lifter Assembly, Valve; Valve Lifter; Lifter, Engine Valve Lifter
- Replaces: 25191257, 96990213
Fits the following Chevrolet Models:
- Spark | 2013-2015 | LS, LT | 4 Cyl 1.2 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 17120991
Product Specifications
- Other Name: Lifter Assembly-Valve; Valve Lifter; Lifter, Engine Valve Lifter
- Replaces: 17089102, 17105696, 17105951
Fits the following Chevrolet Models:
- Corvette | 1992-1995 | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 5234680
Product Specifications
- Other Name: Lifter Assembly-Valve; Valve Lifter; Lifter, Engine Valve Lifter
Fits the following Chevrolet Models:
- Caprice | 1989-1990 | Classic | 8 Cyl 5.0 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 5234485
Product Specifications
- Other Name: Lifter, Valve; Valve Lifter; Lifter, Engine Valve Lifter
Fits the following Chevrolet Models:
- Caprice | 1984 | Classic | 6 Cyl 3.8 L GAS
- El Camino | 1984 | Base, Conquista, SS | 6 Cyl 3.8 L GAS
- Impala | 1984 | Base | 6 Cyl 3.8 L GAS
- Monte Carlo | 1984 | Base | 6 Cyl 3.8 L GAS
View More
View related parts
Chevrolet Valve Lifters Part Number: 17108288
Product Specifications
- Other Name: Lifter Assembly-Valve; Valve Lifter; Lifter, Engine Valve Lifter
- Replaces: 17106046
Fits the following Chevrolet Models:
- Lumina | 1992-1996 | Euro, LS, Z34 | 6 Cyl 3.4 L GAS
- Monte Carlo | 1995-1996 | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Valve Lifters Part Number: 21015025
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Valve Lifter
- Replaces: 21006678, 21000740
Fits the following Chevrolet Models:
- Cavalier | 1995-2002 | LS, LS Sport, Z24 | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
- Lumina | 1997 | LTZ | 6 Cyl 3.4 L GAS
- Monte Carlo | 1997 | Z34 | 6 Cyl 3.4 L GAS
View More
View related parts
Chevrolet Valve Lifters Part Number: 91177364
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Lifter, Engine Valve; Valve Lifter
- Replaces: 25178085, 17105697
Fits the following Chevrolet Models:
- Metro | 1998-2000 | Base | 3 Cyl 1.0 L GAS
- Tracker | 1999-2004 | Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

| Page 1 of 2 |Next >

1-20 of 35 Results

Chevrolet Lash Adjuster

Choose OEM Lash Adjuster, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Lash Adjuster. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Lash Adjuster maintains the valve clearances to a tight to ensure cleaner power and increased engine life. Since 1911, Chevrolet has propelled driving in the combination of the highly practical functions and the sort of punch that makes the commute something people enjoy. Chevy users appreciate a combination of simple controls, spacious cabins, and styling that, in a sense, is able to be both fresh and does not need to attract the eyes. Any Chevrolet, no matter how large, is meant to strike a compromise between cost and durability. Compact enough to fit into a city size, powerful enough to be a truck, the lineup of vehicles all have one thing in common: it does not seem delicate. The road trips become a lot shorter since infotainment menus remain basic and the seats remain accommodating to the backs. Features like Super Cruise that allow safety technology are found in trims that are affordable to regular people, and they demonstrate that the company not only listens to the drivers but also to the marketing gurus. Chevy engineers make light bodies, powertrains, and suspensions that shake off pavement that has been beat up, thus the miles go on and on without any drama attached to them. The Lash Adjuster is a self-setting shim, which in the engine combats clearance between the cam and valve using pressurized oil, thus maintaining timing crisp, damping clatter, and reducing wear on all moving surfaces. A Lash Adjuster slices the friction even more since its small wheel rolls rather than scrapes, releasing the horsepower which, in other instances of scraping, cooks off as heat. Hydraulic models are dynamically adjusted, and cold starts and redline explosions are equally smooth. Chevy enthusiasts perceive the reduced noise during idle moments first, followed by the increased periods of service.

Chevrolet Lash Adjuster Parts and Q&A

Valve Lifters
5234212
Q: How to remove and install Lash Adjuster in V6 engine on Chevrolet Beretta?
A:
There are various methods that can be employed to diagnose a noisy Lash Adjuster. To start with, you can listen at the other side near the valve locations using a mechanic's stethoscope or a length of hose while the engine is idling in order to locate a noisy Lash Adjuster. Another way involves removal of the rocker arm cover and touching each valve spring retainer one at a time with an idling engine. If one of the Lash Adjusters is bad, you will feel a noticeable shock in the retainer every time the valve seats. Some common causes for noisy Lash Adjusters include dirt in the Lash Adjuster and problems related to oil flow, viscosity or pressure. There are few things that need to be done before making any conclusions about the problematic Lash Adjusters. Firstly, it is necessary to inspect the engine oil for fuel contamination; ensure that it's at proper level; clean and with proper viscosity. For removal, start by removing intake manifold and rocker arm cover(s). After that remove rocker arms and pushrods. If your engine has roller Lash Adjusters (1994 and newer models), also remove lifter guide. Different methods can be used to get out the Lash Adjusters from their bores. However, in some cases, you may not have to use this special tool made for this purpose. In newer engines without significant varnish buildup, Lash Adjusters can often be removed using a small magnet or even your fingers. Use a machinist's scribe with one end bent as an alternative method of pulling them out by placing its point under the retainer ring on top of each Lash Adjuster. Lash Adjuster removal should avoid using pliers unless they will be replaced as pliers can damage precision machined and hardened Lash Adjusters.Try not to forget that before removing them carefully place them in a well labeled container to make sure that they are reinstalled in their original positions later on since some engines may have both standard and 0.010-inch oversize Lash Adjusters installed at the factory, which are marked by a drop of white paint and a 0.25 (mm) OS stamp on them. As for inspection and installation, you should remember that Lash Adjuster parts cannot be sold separately. The Lash Adjusters have to be replaced with new ones if they are worn out; in case you have conventional Lash Adjusters in your engine, camshaft should also be replaced. It is important never to mix used conventional Lash Adjusters with a new camshaft or new conventional Lash Adjusters with a used camshaft. Nevertheless, used roller Lash Adjusters can be reinstalled with a new camshaft, and the original camshaft can be used if new roller Lash Adjusters are installed provided that the used parts are in good condition. Whenever you are reinstalling used Lash Adjusters ensure that they are put back to their original bores, soak new Lash Adjusters in oil to release any air pockets trapped within them, also coat all Lash Adjuster bottoms with moly-base grease or engine assembly lube prior to installing them. Remaining installation steps must now be done in reverse order while for those installing roller Lash Adjusters make sure the lifter guide bolts are properly tightened. Lastly start up the engine and look out for any oil leaks.