How to remove and install a clutch pressure plate and driven plate on GMC C3500?

Take out the transmission. Take off the quick disconnect that connects the concentric slave cylinder. The system needs a clutch drive gear or a (J5824-01) to effectively support the clutch. Be sure to mark not only the Flywheel (5) but also a clutch Pressure Plate lug so you know where to place them for mounting. Take out the bolts (3) and the washers (2) that attach both the clutch Pressure Plate (4) and the clutch driven plate (1) to the Flywheel (5). Lift out the clutch alignment tool from the clutch collar. Clean each part with a water dampened cloth and make sure there are no signs of damage. With a straight edge, examine the surfaces where the clutch connects and check the friction pads for marks, holes, lots of oil and missing or broken rivets; if there is a lot of oil on the friction pads, replace the clutch driven plate. Look for any damaged splines and check that fit splines slide freely and look over all the springs and the boot for bends, cracks and rips. Insert the bolts and the washers and attach the Pressure Plate and clutch plate to the end of the Flywheel. You should install (J5824-01) or a used clutch drive gear for clutch support. Locate the yellow dot on the clutch Pressure Plate and put it in line with the "x" that appears on the heaviest part of the Flywheel. Tighten the clutch Pressure Plate bolts to 41 nm (30 ft. Lbs.). Take out the alignment tool. Attach the quick disconnect to the end of the concentric slave cylinder. Put the transmission in place.

How to service and repair the pressure plate on GMC C2500?

Service and repair of the Pressure Plate requires starting with transmission removal. The first step involves disconnecting the quick disconnect from the actuator cylinder. The service technician must either install the clutch alignment tool (J 5824-01) or support the clutch with a clutch drive gear. Mark the Flywheel along with a clutch Pressure Plate lug before their installation alignment. You should take the bolts and washers that attach the clutch Pressure Plate and clutch driven plate to Flywheel . Afterward, extract the clutch alignment tool. The installation requires attaching the clutch Pressure Plate and the clutch driven plate to the Flywheel through the use of bolts that include washers . Support the clutch using either a clamp tool known as clutch alignment tool (J 5824-01) or a clutch drive gear. Secure the clutch Pressure Plate to the Flywheel bolts by applying torque to 41 nm (30 ft. Lbs.). Then remove the clutch alignment tool. The transmission should be installed followed by connecting the quick disconnect to the concentric slave cylinder.

OEM GMC Pressure Plate

Clutch Pressure Plate

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Pressure Plates found

View related parts
GMC Pressure Plate Part Number: 15765633
$492.59 MSRP: $782.08
You Save: $289.49 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
- Replaces: 15043620
Fits the following GMC Models:
- Sierra 1500 | 2001-2006 | Base, C3, Denali, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Sierra 1500 Classic | 2007 | Denali, SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Yukon | 2001-2006 | Denali | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Pressure Plate Part Number: 24259733
$169.85 MSRP: $279.78
You Save: $109.93 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
- Replaces: 24230634, 24234453
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS
View related parts
GMC Pressure Plate Part Number: 12382947
$217.77 MSRP: $342.65
You Save: $124.88 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Engine (W/Cover); Clutch Kit
Fits the following GMC Models:
- C1500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 5.7 L GAS
- C1500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- C2500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
- C2500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- C3500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS
- K1500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 5.7 L GAS
- K1500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K2500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
- K2500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K3500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS
View More
View related parts
GMC Pressure Plate Part Number: 94672439
$455.86 MSRP: $723.75
You Save: $267.89 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
- Replaces: 94668717
Fits the following GMC Models:
- Canyon | 2009-2010 | SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
GMC Pressure Plate Part Number: 3997762
$409.96 MSRP: $675.07
You Save: $265.11 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover & Plate Assembly-Clutch-Pressure; Clutch Kit
- Replaced by: 89059409
Fits the following GMC Models:
- C1500 | 1984 | Base, High Sierra, Sierra Classic | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- C1500 Suburban | 1984 | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- C2500 | 1984 | Base, High Sierra, Sierra Classic | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- C2500 Suburban | 1984 | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- C3500 | 1984 | Base, High Sierra, Sierra Classic | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- G2500 | 1984 | Rally, Rally Custom, Rally STX, Vandura | 8 Cyl 6.2 L DIESEL
- G3500 | 1984 | Magnavan, Rally, Rally Camper Special, Rally Custom, Rally STX, Vandura, Vandura Special | 8 Cyl 6.2 L DIESEL
- Jimmy | 1984 | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K1500 | 1984 | Base, High Sierra, Sierra Classic | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K1500 Suburban | 1984 | Base, High Sierra, Sierra Classic | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View More
View related parts
GMC Pressure Plate Part Number: 24230633
Product Specifications
- Other Name: Clutch Kit; Plate, Engine Clutch
- Replaces: 24234559
Fits the following GMC Models:
- Canyon | 2004-2007 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Pressure Plate Part Number: 24235337
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
- Replaces: 15046596
Fits the following GMC Models:
- Sierra 1500 | 1999-2006 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
- Sierra 1500 Classic | 2007 | SL, WT | 6 Cyl 4.3 L GAS
View related parts
GMC Pressure Plate Part Number: 12382578
Product Specifications
- Other Name: Plate Kit, Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate Kit, Engine Clutch(Pressure Plate)
- Replaces: 15148556, 12382577
Fits the following GMC Models:
- C1500 | 1996-1998 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS
- Jimmy | 1996-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- K1500 | 1996-1998 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS
- Sonoma | 1996-2004 | SL, SLE, SLS | 6 Cyl 4.3 L GAS
View More
View related parts
GMC Disc Part Number: 15551426
Product Specifications
- Other Name: Clutch Kit; Plate, Engine Clutch Driven(Friction Disc)
Fits the following GMC Models:
- Safari | 1985-1989 | Base, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Pressure Plate Part Number: 12382580
Product Specifications
- Other Name: Clutch Kit, Engine (W/Cover); Cover, Engine Clutch(Pressure Plate); Plate, Engine Clutch(Pressure Plate); Clutch Kit
Fits the following GMC Models:
- Safari | 1985-1989 | Base, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Pressure Plate Part Number: 12380468
Product Specifications
- Other Name: Clutch Kit, (W/Cover); Plate Kit, Engine Clutch(Pressure Plate); Clutch Kit
Fits the following GMC Models:
- Sonoma | 1992-1995 | Base, SL, SLE, SLS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
GMC Pressure Plate Part Number: 15039566
Product Specifications
- Other Name: Plate, Engine Clutch (Pressure Plate); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
Fits the following GMC Models:
- Sierra 1500 | 1999-2000 | SL, SLE, SLT | 8 Cyl 4.8 L GAS
- Yukon | 2000 | SLE, SLT | 8 Cyl 4.8 L GAS
View related parts
GMC Pressure Plate Part Number: 15638388
Product Specifications
- Other Name: Cover, W/Plate, Clutch Pressure; Clutch Kit; Cover, Engine Clutch(Pressure Plate); Plate, Engine Clutch(Pressure Plate)
Fits the following GMC Models:
- C1500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- C1500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- C2500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- C2500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- C3500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K1500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K1500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K2500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K2500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K3500 | 1988-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View More
View related parts
GMC Pressure Plate Part Number: 15638389
Product Specifications
- Other Name: Cover, Engine Clutch (Pressure Plate); Clutch Kit; Cover, Engine Clutch(Pressure Plate)
Fits the following GMC Models:
- C1500 | 1988-1990 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
- C2500 | 1988-1990 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
- K1500 | 1988-1990 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
- K2500 | 1988-1990 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
View More
View related parts
GMC Pressure Plate Part Number: 12382945
Product Specifications
- Other Name: Clutch Kit, Engine (W/Cover); Plate Kit, Engine Clutch(Pressure Plate); Clutch Kit
Fits the following GMC Models:
- C1500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C2500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C3500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- K1500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- K2500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- K2500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- K3500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Pressure Plate Part Number: 15061130
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
Fits the following GMC Models:
- Sierra 2500 HD | 2001-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Yukon XL 2500 | 2001-2004 | SLE, SLT | 8 Cyl 8.1 L GAS
View More
View related parts
GMC Pressure Plate Part Number: 17801293
Product Specifications
- Other Name: Plate Kit, Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate Kit, Engine Clutch(Pressure Plate)
- Replaces: 15732270, 15732276, 12383972
Fits the following GMC Models:
- C2500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
- C2500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 7.4 L GAS
- C3500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
- K2500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
- K2500 Suburban | 1996 | Base, SLE, SLT | 8 Cyl 7.4 L GAS
- K3500 | 1996 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
View More
View related parts
GMC Pressure Plate Part Number: 15732266
Product Specifications
- Other Name: Clutch Kit, Engine (W/Pressure Plate & Driven Plate); Clutch Kit
- Replaces: 12382946
Fits the following GMC Models:
- C1500 | 1996-1999 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 5.0 L GAS
- C2500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS
- K1500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 5.0 L GAS
- K2500 | 1998 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS
View More
View related parts
GMC Pressure Plate Part Number: 15002591
Product Specifications
- Other Name: Clutch Kit, Engine (W/Pressure Plate & Driven Plate); Plate Kit, Engine Clutch(Pressure Plate); Clutch Kit
Fits the following GMC Models:
- C1500 | 1998-1999 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 5.7 L GAS
- C1500 Suburban | 1998-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- C2500 | 1998-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
- C2500 Suburban | 1998-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- C3500 | 1998-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
- K1500 | 1998-1999 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 5.7 L GAS
- K1500 Suburban | 1998-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K2500 | 1998-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS
- K2500 Suburban | 1998-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
- K3500 | 1998-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS
View More
View related parts
GMC Pressure Plate Part Number: 12582965
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
Fits the following GMC Models:
- Sierra 2500 HD | 2005-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 | 2005-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Yukon XL 2500 | 2005-2006 | SLE, SLT | 8 Cyl 8.1 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 26 Results

GMC Pressure Plate

Choose OEM Pressure Plate, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Pressure Plate. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Pressure Plate Parts and Q&A

Pressure Plate
15002591
Q: How to remove and install a clutch pressure plate and driven plate on GMC C3500?
A:
Take out the transmission. Take off the quick disconnect that connects the concentric slave cylinder. The system needs a clutch drive gear or a (J5824-01) to effectively support the clutch. Be sure to mark not only the Flywheel (5) but also a clutch Pressure Plate lug so you know where to place them for mounting. Take out the bolts (3) and the washers (2) that attach both the clutch Pressure Plate (4) and the clutch driven plate (1) to the Flywheel (5). Lift out the clutch alignment tool from the clutch collar. Clean each part with a water dampened cloth and make sure there are no signs of damage. With a straight edge, examine the surfaces where the clutch connects and check the friction pads for marks, holes, lots of oil and missing or broken rivets; if there is a lot of oil on the friction pads, replace the clutch driven plate. Look for any damaged splines and check that fit splines slide freely and look over all the springs and the boot for bends, cracks and rips. Insert the bolts and the washers and attach the Pressure Plate and clutch plate to the end of the Flywheel. You should install (J5824-01) or a used clutch drive gear for clutch support. Locate the yellow dot on the clutch Pressure Plate and put it in line with the "x" that appears on the heaviest part of the Flywheel. Tighten the clutch Pressure Plate bolts to 41 nm (30 ft. Lbs.). Take out the alignment tool. Attach the quick disconnect to the end of the concentric slave cylinder. Put the transmission in place.
Pressure Plate
15042759
Q: How to service and repair the pressure plate on GMC C2500?
A:
Service and repair of the Pressure Plate requires starting with transmission removal. The first step involves disconnecting the quick disconnect from the actuator cylinder. The service technician must either install the clutch alignment tool (J 5824-01) or support the clutch with a clutch drive gear. Mark the Flywheel along with a clutch Pressure Plate lug before their installation alignment. You should take the bolts and washers that attach the clutch Pressure Plate and clutch driven plate to Flywheel . Afterward, extract the clutch alignment tool. The installation requires attaching the clutch Pressure Plate and the clutch driven plate to the Flywheel through the use of bolts that include washers . Support the clutch using either a clamp tool known as clutch alignment tool (J 5824-01) or a clutch drive gear. Secure the clutch Pressure Plate to the Flywheel bolts by applying torque to 41 nm (30 ft. Lbs.). Then remove the clutch alignment tool. The transmission should be installed followed by connecting the quick disconnect to the concentric slave cylinder.