How to remove and install a clutch pressure plate and driven plate on GMC C3500?

Take out the transmission. Take off the quick disconnect that connects the concentric slave cylinder. The system needs a clutch drive gear or a (J5824-01) to effectively support the clutch. Be sure to mark not only the Flywheel (5) but also a clutch Pressure Plate lug so you know where to place them for mounting. Take out the bolts (3) and the washers (2) that attach both the clutch Pressure Plate (4) and the clutch driven plate (1) to the Flywheel (5). Lift out the clutch alignment tool from the clutch collar. Clean each part with a water dampened cloth and make sure there are no signs of damage. With a straight edge, examine the surfaces where the clutch connects and check the friction pads for marks, holes, lots of oil and missing or broken rivets; if there is a lot of oil on the friction pads, replace the clutch driven plate. Look for any damaged splines and check that fit splines slide freely and look over all the springs and the boot for bends, cracks and rips. Insert the bolts and the washers and attach the Pressure Plate and clutch plate to the end of the Flywheel. You should install (J5824-01) or a used clutch drive gear for clutch support. Locate the yellow dot on the clutch Pressure Plate and put it in line with the "x" that appears on the heaviest part of the Flywheel. Tighten the clutch Pressure Plate bolts to 41 nm (30 ft. Lbs.). Take out the alignment tool. Attach the quick disconnect to the end of the concentric slave cylinder. Put the transmission in place.

OEM GMC C3500 Pressure Plate

Clutch Pressure Plate

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Pressure Plates found

View related parts
GMC C3500 Pressure Plate Part Number: 3997762
$409.96 MSRP: $675.07
You Save: $265.11 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover & Plate Assembly-Clutch-Pressure; Clutch Kit
- Replaced by: 89059409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 GMC C3500 | Base, High Sierra, Sierra Classic | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC C3500 Pressure Plate Part Number: 12382947
$217.77 MSRP: $342.65
You Save: $124.88 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Engine (W/Cover); Clutch Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS
View related parts
GMC C3500 Pressure Plate Part Number: 89059300
$320.87 MSRP: $638.49
You Save: $317.62 (50%)
ADD TO CART
Product Specifications
- Other Name: Plate Kit, Clutch Pressure & Driven (W/Cover); Clutch Kit; Disc; Plate Kit, Engine Clutch(Pressure Plate)
- Replaces: 12380418, 12380419, 12388077, 15675945
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 6.5 L DIESEL
View related parts
GMC C3500 Pressure Plate Part Number: 15042759
$479.29 MSRP: $757.52
You Save: $278.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
- Replaces: 15029428
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C3500 Pressure Plate Part Number: 89059411
Product Specifications
- Other Name: Plate Kit, Clutch Pressure & Driven (W/Cover); Clutch Kit; Disc; Plate Kit, Engine Clutch(Pressure Plate)
- Replaces: 15732274, 15732268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
View related parts
GMC C3500 Pressure Plate Part Number: 17801293
Product Specifications
- Other Name: Plate Kit, Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate Kit, Engine Clutch(Pressure Plate)
- Replaces: 15732270, 15732276, 12383972
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 7.4 L GAS
View related parts
GMC C3500 Pressure Plate Part Number: 15002591
Product Specifications
- Other Name: Clutch Kit, Engine (W/Pressure Plate & Driven Plate); Plate Kit, Engine Clutch(Pressure Plate); Clutch Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
View related parts
GMC C3500 Pressure Plate Part Number: 12382945
Product Specifications
- Other Name: Clutch Kit, Engine (W/Cover); Plate Kit, Engine Clutch(Pressure Plate); Clutch Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 GMC C3500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
View related parts
GMC C3500 Pressure Plate Part Number: 15638388
Product Specifications
- Other Name: Cover, W/Plate, Clutch Pressure; Clutch Kit; Cover, Engine Clutch(Pressure Plate); Plate, Engine Clutch(Pressure Plate)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1995 GMC C3500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL

GMC C3500 Pressure Plate

Want to cut long-term maintenance and repair costs? Choose OEM Pressure Plate. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC C3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC C3500 Pressure Plate includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

As a core component within the clutch assembly of GMC C3500 vehicles the Pressure Plate operates to guarantee dependable performance along with operational efficiency. The Pressure Plate demonstrates high durability while simultaneously controlling the clutch disc contact to the flywheel to help vehicles change gears. This component works with all GMC C3500 model types both as standard chassis cabs and crew cabs to serve a diverse set of light through medium-duty operational needs. Three main types of GMC C3500 Pressure Plate exist to fulfill particular driving purposes including diaphragm models alongside Borg & Beck and Long Style designs. Smooth everyday driving experiences require the diaphragm pressure plate but Borg & Beck and Long Style pressure plates deliver optimal heavy-duty and racing performance. Through this variety GMC C3500 owners acquire the ability to choose Pressure Plates which match their particular driving needs and achieve both productivity and safety increments. Customers choose the GMC C3500 Pressure Plate in the automotive market because of its dependable construction design and operational excellence which provides reliable driving performance across diverse conditions. The GMC C3500 Pressure Plate plays a central role in power transfer and vehicle control functions as a crucial component which enhances the performance and safety of the automaker model trucks so owners should consider making this investment.

GMC C3500 Pressure Plate Parts and Q&A

Pressure Plate
15042759
Q: How to remove and install a clutch pressure plate and driven plate on GMC C3500?
A:
Take out the transmission. Take off the quick disconnect that connects the concentric slave cylinder. The system needs a clutch drive gear or a (J5824-01) to effectively support the clutch. Be sure to mark not only the Flywheel (5) but also a clutch Pressure Plate lug so you know where to place them for mounting. Take out the bolts (3) and the washers (2) that attach both the clutch Pressure Plate (4) and the clutch driven plate (1) to the Flywheel (5). Lift out the clutch alignment tool from the clutch collar. Clean each part with a water dampened cloth and make sure there are no signs of damage. With a straight edge, examine the surfaces where the clutch connects and check the friction pads for marks, holes, lots of oil and missing or broken rivets; if there is a lot of oil on the friction pads, replace the clutch driven plate. Look for any damaged splines and check that fit splines slide freely and look over all the springs and the boot for bends, cracks and rips. Insert the bolts and the washers and attach the Pressure Plate and clutch plate to the end of the Flywheel. You should install (J5824-01) or a used clutch drive gear for clutch support. Locate the yellow dot on the clutch Pressure Plate and put it in line with the "x" that appears on the heaviest part of the Flywheel. Tighten the clutch Pressure Plate bolts to 41 nm (30 ft. Lbs.). Take out the alignment tool. Attach the quick disconnect to the end of the concentric slave cylinder. Put the transmission in place.