How to replace the Automatic Transmission Range Selector Shift Cable on GMC Acadia?

Starting the replacement of the Shift Cable requires applying the parking brake and wheel chocking. Start by taking out the floor console left extension panel followed by removing the shift cable terminal from connecting with shift lever pin. The technician must first detach the cable retainer attached to the shift lever then take the cable out from the transmission control lever base. You must separate the shift cable terminal from its position at the manual shift lever pin then remove the cable retainer. The locking tabs must be pushed inward to disengage the cable from the cable bracket so that you can pull out the grommet from the cowl panel before removing the cable. The first step for installation involves fitting the new cable to both the vehicle body and the grommet on the cowl panel. Fitting the cable begins with attaching it to the cable bracket and then putting the retainer on the cable. Connect the terminal to manual shift lever pin through installation of the cable on the transmission control lever base by securing the retainer in place. Put the terminal onto the shift lever pin and replace the floor console left extension panel. Finish the installation by readjusting the shift cable and undo the parking brake.

How to replace the shift cable for the range selector lever on GMC Sierra 1500?

Start the replacement of the Shift Cable by positioning the steering column shift lever to park and raising the vehicle. Inspect mechanical park by examining the transmission manual shaft before you remove the clips which hold the cable to the floor panel reinforcement. The procedure starts by removing the retainer connected to the bracket and continuing with separating the cable clip on the Transfer Case (if present). Disengage the Shift Cable end from the transmission range selector lever ball stud and then use the tangs to unclip it from the bracket before lowering the vehicle while keeping the steering column shift lever in park. The second step involves taking out the driver seat while undoing the carpet and driver area insulation. First extract the instrument panel knee bolster before breaking loose the retainer holding the cable onto the steering column and then detach the cable end from the steering column ball stud. You should lower the cable from the steering column bracket after depressing the tangs to prevent unwanted cable twisting and bending. The Shift Cable should first be detached from its support structure and the cable grommet needs to be removed from the floor panel before extraction of the cable from the vehicle. Installation involves positioning the new cable into the vehicle while you should place the cable grommet onto the floor panel without causing any cable twisting or bending. The Shift Cable needs attachment to its support before checking if the transmission manual shaft lever positions in mechanical park. Then secure the cable onto the steering column bracket to ensure full tang seating. Connect the cable end to the steering column ball stud by using the retainer for attachment. The repair workflow requires workers to replace carpet and insulation followed by reinstallation of driver seat and instrument panel knee bolster. Follow this procedure to install the cable by attaching it to the bracket then connect the Shift Cable end to the transmission range selector lever ball stud while also affixing an equipped cable clip on the Transfer Case. Use the retainer and clips to attach the cable to the bracket after it has been placed on the floor panel reinforcement. Lower the vehicle afterwards. A final check of transmission shifts should be performed before adjusting the cable when all gear positions cannot be reached.

OEM GMC Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

61 Shift Cables found

View related parts
GMC Shift Control Cable Part Number: 84133622
$29.07 MSRP: $47.90
You Save: $18.83 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23461534, 84573362, 84377163
Fits the following GMC Models:
- Canyon | 2015-2020 | All Terrain, Base, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Shift Control Cable Part Number: 20787606
$46.89 MSRP: $79.81
You Save: $32.92 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Control Cable
Fits the following GMC Models:
- Sierra 1500 | 2010-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX
- Yukon | 2007-2008 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL 1500 | 2007-2008 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL 2500 | 2007-2008 | SLE, SLT | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Shift Control Cable Part Number: 20787611
$55.49 MSRP: $94.48
You Save: $38.99 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 15945100
Fits the following GMC Models:
- Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2007-2014 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007-2014 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Yukon XL 1500 | 2008-2013 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL 2500 | 2008-2013 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Shift Control Cable Part Number: 15945100
$55.49 MSRP: $94.48
You Save: $38.99 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Kit-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Cable Kit, Transmission Shift Control Cable
- Replaced by: 20787611
Fits the following GMC Models:
- Sierra 1500 | 2007-2009 | Denali, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2007-2009 | SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007-2009 | SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Yukon XL 1500 | 2008 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL 2500 | 2008 | SLE, SLT | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Shift Control Cable Part Number: 20787609
$47.30 MSRP: $80.53
You Save: $33.23 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
Fits the following GMC Models:
- Yukon | 2009-2014 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX
- Yukon XL 1500 | 2009-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
- Yukon XL 2500 | 2009-2013 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Shift Control Cable Part Number: 19177023
$54.47 MSRP: $85.30
You Save: $30.83 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
Fits the following GMC Models:
- Sierra 2500 HD | 2007-2009 | SLE, SLT, WT | 8 Cyl 6.0 L GAS
View related parts
GMC Control Cable Part Number: 85623582
$30.71 MSRP: $48.76
You Save: $18.05 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Shift Control Cable; Cable, Transmission Shift Control Cable
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Shift Control Cable Part Number: 84867183
$32.62 MSRP: $53.73
You Save: $21.11 (40%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaced by: 86532014
Fits the following GMC Models:
- Sierra 1500 | 2015-2018 | Base, Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2015 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2015 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Yukon | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL | 2016-2017 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Shift Control Cable Part Number: 85134064
$40.71 MSRP: $67.06
You Save: $26.35 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Cable, Transmission Shift Control Cable
- Replaces: 84677498, 84800576
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Shift Control Cable Part Number: 84507729
$49.77 MSRP: $81.98
You Save: $32.21 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23174589
Fits the following GMC Models:
- Yukon | 2016-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Shift Control Cable Part Number: 19180564
$101.07 MSRP: $158.39
You Save: $57.32 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
Fits the following GMC Models:
- Yukon | 2008 | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Shift Control Cable Part Number: 19177020
$40.91 MSRP: $64.09
You Save: $23.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaces: 15945097
Fits the following GMC Models:
- Yukon | 2007-2008 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL 1500 | 2007-2008 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL 2500 | 2007-2008 | SLE, SLT | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Shift Control Cable Part Number: 20787610
$52.11 MSRP: $88.06
You Save: $35.95 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
Fits the following GMC Models:
- Sierra 1500 | 2010-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX
View related parts
GMC Shift Control Cable Part Number: 85103955
$30.12 MSRP: $45.44
You Save: $15.32 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
Fits the following GMC Models:
- Canyon | 2021-2022 | AT4, Denali, Elevation, Elevation Standard | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Shift Control Cable Part Number: 87839968
$42.08 MSRP: $62.63
You Save: $20.55 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Cable, Transmission Shift Control Cable
- Replaces: 84602551, 84755888
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Shift Control Cable Part Number: 84604278
$38.54 MSRP: $60.33
You Save: $21.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable
- Replaces: 84448623
Fits the following GMC Models:
- Sierra 1500 | 2020-2021 | AT4, Denali, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Shift Control Cable Part Number: 84525955
$47.60 MSRP: $70.85
You Save: $23.25 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 22791902
Fits the following GMC Models:
- Sierra 1500 | 2014-2017 | Base, SLE | 6 Cyl 4.3 L FLEX
View related parts
GMC Shift Control Cable Part Number: 84525959
$49.86 MSRP: $74.21
You Save: $24.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 22893848
Fits the following GMC Models:
- Yukon | 2015 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL | 2015-2017 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Cable Part Number: 84900875
$34.80 MSRP: $51.79
You Save: $16.99 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Front Floor Console Armrest
- Replaces: 84854061
Fits the following GMC Models:
- Yukon | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Shift Control Cable Part Number: 19177017
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaces: 15945094
Fits the following GMC Models:
- Sierra 1500 | 2008 | Denali, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS

| Page 1 of 4 |Next >

1-20 of 61 Results

GMC Shift Cable

Choose OEM Shift Cable, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Shift Cable. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Shift Cable converts the motions of the driver lever into sharp, reliable transmission responses in any road. GMC trucks and SUVs are introduced with frames that shake off twisting loads and engines that are set to haul with confidence. They beat out miles upon bad roads and make tests that keep things quiet across washboard streets and bridges that quiet highway noise. Camera tow helps in slice guesswork to ensure that weekend crews push trailers into narrow areas as daily commuters can push big rigs into areas with a street smart attitude. The tailgate of a MultiPro folds, unfolds, and walks to fit most bizarre cargo, and inventive bed lighting extends hours beyond the fall of the sun. Reliability remains in the limelight with the new powertrains getting every gallon more squeezy and the electronic eyes in the blind spots. Silenced insulation, small panel gaps, and solid finish of paint finishes allow the line up to appear high quality even when mud sticks to the rockers. The Shift Cable connects the shift lever to the transmission consisting of a steel core and low-friction jacket, converting fast wrist actions to precise gear detents, eliminating stretch that may bang the drive line angles, and thumping off heat, mud, and vibration during the mileage. Since the Shift Cable will cooperate with both column and console selectors, GMC drivers can be in tow mode, in overdrive or in reverse almost immediately under assaults of snow and salt in winter and even dust in summer, under the aberrant stop-and-go traffic, and the rugged construction reduces the likelihood of roadside limps caused by kinks, corrosion, fraying or broken strands even on isolated backroads.

GMC Shift Cable Parts and Q&A

Control Cable
23256076
Q: How to replace the Automatic Transmission Range Selector Shift Cable on GMC Acadia?
A:
Starting the replacement of the Shift Cable requires applying the parking brake and wheel chocking. Start by taking out the floor console left extension panel followed by removing the shift cable terminal from connecting with shift lever pin. The technician must first detach the cable retainer attached to the shift lever then take the cable out from the transmission control lever base. You must separate the shift cable terminal from its position at the manual shift lever pin then remove the cable retainer. The locking tabs must be pushed inward to disengage the cable from the cable bracket so that you can pull out the grommet from the cowl panel before removing the cable. The first step for installation involves fitting the new cable to both the vehicle body and the grommet on the cowl panel. Fitting the cable begins with attaching it to the cable bracket and then putting the retainer on the cable. Connect the terminal to manual shift lever pin through installation of the cable on the transmission control lever base by securing the retainer in place. Put the terminal onto the shift lever pin and replace the floor console left extension panel. Finish the installation by readjusting the shift cable and undo the parking brake.
Shift Control Cable
20787608
Q: How to replace the shift cable for the range selector lever on GMC Sierra 1500?
A:
Start the replacement of the Shift Cable by positioning the steering column shift lever to park and raising the vehicle. Inspect mechanical park by examining the transmission manual shaft before you remove the clips which hold the cable to the floor panel reinforcement. The procedure starts by removing the retainer connected to the bracket and continuing with separating the cable clip on the Transfer Case (if present). Disengage the Shift Cable end from the transmission range selector lever ball stud and then use the tangs to unclip it from the bracket before lowering the vehicle while keeping the steering column shift lever in park. The second step involves taking out the driver seat while undoing the carpet and driver area insulation. First extract the instrument panel knee bolster before breaking loose the retainer holding the cable onto the steering column and then detach the cable end from the steering column ball stud. You should lower the cable from the steering column bracket after depressing the tangs to prevent unwanted cable twisting and bending. The Shift Cable should first be detached from its support structure and the cable grommet needs to be removed from the floor panel before extraction of the cable from the vehicle. Installation involves positioning the new cable into the vehicle while you should place the cable grommet onto the floor panel without causing any cable twisting or bending. The Shift Cable needs attachment to its support before checking if the transmission manual shaft lever positions in mechanical park. Then secure the cable onto the steering column bracket to ensure full tang seating. Connect the cable end to the steering column ball stud by using the retainer for attachment. The repair workflow requires workers to replace carpet and insulation followed by reinstallation of driver seat and instrument panel knee bolster. Follow this procedure to install the cable by attaching it to the bracket then connect the Shift Cable end to the transmission range selector lever ball stud while also affixing an equipped cable clip on the Transfer Case. Use the retainer and clips to attach the cable to the bracket after it has been placed on the floor panel reinforcement. Lower the vehicle afterwards. A final check of transmission shifts should be performed before adjusting the cable when all gear positions cannot be reached.