How to replace the front torsion bar on Chevrolet Colorado?

To change the front Torsion Bar, first, lift and support the vehicle, that would allow the front suspension to come to the rebound position. Mark the adjuster bolt and indicate via the number of turns required to remove it for reassembly. Removing the adjuster bolt, spacer, and adjuster nut with an observation that the torsion bars are unique for the left and right side of the vehicle. Then, take out the adjustment arms and torsion bars in one as a piece by displacing their rear end to separate them from the lower Control Arm. For installation, place the adjustment arms and torsion bars according to the original positioning, attach the adjustment arm at the Torsion Bar and slide the Torsion Bar towards the lower Control Arm till it is fully engaged. Contact muffler will stay the same without a change in position. Tighten the adjuster bolt slightly while the adjuster nut is on the opposite end. Replace the two degas tank fittings with straight tube ends (dealer). tighten the bolt to 55 nm (40 ft lb). Using a wrench, spin the spacer and adjuster bolt washer off the adjuster.istrov then remove the tip. Then remove the tip top nut.

How to replace the torsion bar and support assembly on Chevrolet S10?

The vehicle needs to be lifted before it receives support to replace the Torsion Bar and support assembly. Record the location of the adjuster bolt before using the Torsion Bar loading/unloading tool (J 36202) to mount it onto the adjustment arm and crossmember. Make the necessary tension adjustments on the adjustment arm while recording the turn count for future use. After tool removal you can allow the unloading of the Torsion Bar. After moving the Torsion Bar toward the front position the technician removes the adjustment arm before unfastening the upper nuts and bolts on the support link assembly. Disconnect the frontfork and separate the torsion bars while recording which end faces forward and which side is being taken off. You should remove the lower retaining nuts securing the Torsion Bar links then detach the links from the Torsion Bar support. Fasten the Torsion Bar links to their position on the Torsion Bar support and torque the lower retaining nuts to 50 nm (37 ft. Lbs.). Place the torsion bars in their factory installation positions before reattaching the Torsion Bar support to the frame followed by tightening the upper mounting bolts and nuts to 65 nm (48 ft. Lbs.). Reinstall the adjustment arm to the Torsion Bar support by sliding the Torsion Bar backward until complete engagement occurs. Connect the Torsion Bar loading/unloading tool (J 36202) to the adjustment arm and crossmember while increasing the tension to properly load the Torsion Bar. Use the adjuster bolt tightening procedure from removal to achieve the same number of turns before installing the bolt and adjuster nut. Check wheel alignment by lowering the vehicle after tool removal.

OEM Chevrolet Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

65 Torsion Bars found

View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 19330060
$312.71 MSRP: $492.03
You Save: $179.32 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Ball Joint; Lower Ball Joint; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528965
Fits the following Chevrolet Models:
- Blazer | 1992-1994 | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C1500 | 1988-1999 | 454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C1500 Suburban | 1992-1999 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1988-2000 | Base, Cheyenne, LS, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1999 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1988-2000 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 | 1988-1999 | Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1992-1999 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1988-2000 | Base, Cheyenne, LS, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1999 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Torsion Bar, Front Part Number: 15048312
$257.64 MSRP: $405.40
You Save: $147.76 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion
- Position: Front
- Replaced by: 19332932
Fits the following Chevrolet Models:
- Silverado 1500 | 2000 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
- Silverado 2500 | 2000 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Suburban 1500 | 2000 | Base, LS, LT | 8 Cyl 5.3 L GAS
- Suburban 2500 | 2000 | Base, LS, LT | 8 Cyl 6.0 L GAS
- Tahoe | 2000 | Base, Limited, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 84745477
$258.71 MSRP: $448.59
You Save: $189.88 (43%)
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Torsion Bar, Front Passenger Side Part Number: 84745479
$262.36 MSRP: $454.90
You Save: $192.54 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 84301245
$259.43 MSRP: $408.22
You Save: $148.79 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 20883356, 23377385
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2011-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2011-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 84301251
$298.62 MSRP: $469.84
You Save: $171.22 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 20883362, 23377391
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2018-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2018-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 84745485
$295.06 MSRP: $511.61
You Save: $216.55 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Torsion Bar, Front Passenger Side Part Number: 84745483
$269.89 MSRP: $467.95
You Save: $198.06 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 84745481
$266.15 MSRP: $461.49
You Save: $195.34 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 15990699
$110.21 MSRP: $164.00
You Save: $53.79 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion (Left-Hand)
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Astro | 1997-1998 | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Torsion Bar, Front Passenger Side Part Number: 15990700
$110.21 MSRP: $164.00
You Save: $53.79 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar-Front Torsion (Right-Hand)
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Astro | 1997-1998 | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 15945637
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Colorado | 2009-2012 | LT | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 84301249
$244.12 MSRP: $384.11
You Save: $139.99 (37%)
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 23377389, 20883360
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2011-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2011-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Torsion Bar, Front Passenger Side Part Number: 15100047
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Colorado | 2004-2008 | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 19332967
$67.40 MSRP: $105.58
You Save: $38.18 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15173584, 20784588
Fits the following Chevrolet Models:
- Colorado | 2004-2012 | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Torsion Bar, Front Passenger Side Part Number: 20784589
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15173585
Fits the following Chevrolet Models:
- Colorado | 2004-2012 | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Torsion Bar, Front Passenger Side Part Number: 20784593
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15945640
Fits the following Chevrolet Models:
- Colorado | 2009-2012 | LT, WT | 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Torsion Bar, Front Passenger Side Part Number: 14056382
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- S10 | 1991-1994 | Baja, Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Torsion Bar, Front Driver Side Part Number: 14056381
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front(Coil Type); Bar, Front Chassis
- Position: Front Driver Side
Fits the following Chevrolet Models:
- S10 | 1991-1994 | Baja, Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Torsion Bar, Front Passenger Side Part Number: 15990702
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Astro | 1999-2005 | Base, LS, LT | 6 Cyl 4.3 L GAS

| Page 1 of 4 |Next >

1-20 of 65 Results

Chevrolet Torsion Bar

Choose OEM Torsion Bar, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Torsion Bar. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Torsion Bar Parts and Q&A

Torsion Bar, Front Driver Side
19332967
Q: How to replace the front torsion bar on Chevrolet Colorado?
A:
To change the front Torsion Bar, first, lift and support the vehicle, that would allow the front suspension to come to the rebound position. Mark the adjuster bolt and indicate via the number of turns required to remove it for reassembly. Removing the adjuster bolt, spacer, and adjuster nut with an observation that the torsion bars are unique for the left and right side of the vehicle. Then, take out the adjustment arms and torsion bars in one as a piece by displacing their rear end to separate them from the lower Control Arm. For installation, place the adjustment arms and torsion bars according to the original positioning, attach the adjustment arm at the Torsion Bar and slide the Torsion Bar towards the lower Control Arm till it is fully engaged. Contact muffler will stay the same without a change in position. Tighten the adjuster bolt slightly while the adjuster nut is on the opposite end. Replace the two degas tank fittings with straight tube ends (dealer). tighten the bolt to 55 nm (40 ft lb). Using a wrench, spin the spacer and adjuster bolt washer off the adjuster.istrov then remove the tip. Then remove the tip top nut.
Torsion Bar, Front Driver Side
15956503
Q: How to replace the torsion bar and support assembly on Chevrolet S10?
A:
The vehicle needs to be lifted before it receives support to replace the Torsion Bar and support assembly. Record the location of the adjuster bolt before using the Torsion Bar loading/unloading tool (J 36202) to mount it onto the adjustment arm and crossmember. Make the necessary tension adjustments on the adjustment arm while recording the turn count for future use. After tool removal you can allow the unloading of the Torsion Bar. After moving the Torsion Bar toward the front position the technician removes the adjustment arm before unfastening the upper nuts and bolts on the support link assembly. Disconnect the frontfork and separate the torsion bars while recording which end faces forward and which side is being taken off. You should remove the lower retaining nuts securing the Torsion Bar links then detach the links from the Torsion Bar support. Fasten the Torsion Bar links to their position on the Torsion Bar support and torque the lower retaining nuts to 50 nm (37 ft. Lbs.). Place the torsion bars in their factory installation positions before reattaching the Torsion Bar support to the frame followed by tightening the upper mounting bolts and nuts to 65 nm (48 ft. Lbs.). Reinstall the adjustment arm to the Torsion Bar support by sliding the Torsion Bar backward until complete engagement occurs. Connect the Torsion Bar loading/unloading tool (J 36202) to the adjustment arm and crossmember while increasing the tension to properly load the Torsion Bar. Use the adjuster bolt tightening procedure from removal to achieve the same number of turns before installing the bolt and adjuster nut. Check wheel alignment by lowering the vehicle after tool removal.