How to replace the torsion bar anchor in the front suspension on Chevrolet Colorado?

You need to start by taking out the Torsion Bar in order to replace the anchor in the front suspension. Take off the nuts and bolts from the lower Control Arm, and then take off the Torsion Bar anchor. At installation, the Torsion Bar anchor should be installed first, and fasteners must be used carefully so the car is not harmed. Attach the nuts and bolts to the lower Control Arm tightening them to 80 nm (59 lb ft), and after that, put the Torsion Bar back in.

OEM Chevrolet Colorado Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Torsion Bars found

View related parts
Chevrolet Colorado Torsion Bar, Front Passenger Side Part Number: 20784587
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15167960
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Driver Side Part Number: 15945637
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Passenger Side Part Number: 20784593
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15945640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT, WT | 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Driver Side Part Number: 20784592
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Driver Side
- Replaces: 15945639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT, WT | 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Passenger Side Part Number: 20784589
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15173585
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Passenger Side Part Number: 15945638
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Driver Side Part Number: 19332965
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 20784586, 15167959
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Passenger Side Part Number: 15100047
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Driver Side Part Number: 15100046
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado Torsion Bar, Front Driver Side Part Number: 19332967
$67.40 MSRP: $105.58
You Save: $38.18 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15173584, 20784588
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

Chevrolet Colorado Torsion Bar

Want to cut long-term maintenance and repair costs? Choose OEM Torsion Bar. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Colorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Colorado Torsion Bar includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Colorado Torsion Bar Parts and Q&A

Torsion Bar, Front Driver Side
19332967
Q: How to replace the torsion bar anchor in the front suspension on Chevrolet Colorado?
A:
You need to start by taking out the Torsion Bar in order to replace the anchor in the front suspension. Take off the nuts and bolts from the lower Control Arm, and then take off the Torsion Bar anchor. At installation, the Torsion Bar anchor should be installed first, and fasteners must be used carefully so the car is not harmed. Attach the nuts and bolts to the lower Control Arm tightening them to 80 nm (59 lb ft), and after that, put the Torsion Bar back in.