How to replace the Power Steering Assist Motor on Chevrolet HHR?

The first step when changing the power steering motor requires you to take out the Steering Column. The first step is to detach the tie strap from the power steering motor and disconnect its electrical cord. Position a cloth around the reduction unit followed by its installation into a vice with the reduction unit flange level and remove power steering motor bolts while removing the motor altogether. Wash away all grease from the reduction unit wormshaft space with a lint-free cotton cloth and equivalent products that must not contain solvents. When installing the power steering motor shaft you must apply the provided grease without using excessive amounts. The power steering motor should start smoothly but you should attempt another installation if it fails to start without coercion. Secure the power steering motor at its position then use three complete revolutions of the Steering Shaft to match the motor shaft direction to the reduction unit wormgear. You must prevent any forceful twisting motions to the motor while torquing bolts so alignment issues do not occur. The power steering motor bolts require torque of 18.5 nm (14 lb ft) and the electrical connector should be connected before installing a new tie strap followed by Steering Column reinstallation.

OEM Chevrolet Power Steering Assist Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Power Steering Assist Motors found

View related parts
Chevrolet Motor Part Number: 19257875
$120.37 MSRP: $206.71
You Save: $86.34 (42%)
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Power Steering
- Replaced by: 19368293
Fits the following Chevrolet Models:
- HHR | 2006-2011 | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Motor Part Number: 84368447
$856.85 MSRP: $1467.99
You Save: $611.14 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit-Power Steering Assist
- Replaced by: 84774199
Fits the following Chevrolet Models:
- Silverado 1500 | 2014-2017 | Custom, High Country, LS, LT, LTZ, SSV, WT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Suburban | 2015-2016 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Tahoe | 2015-2016 | LS, LT, LTZ, PPV, SSV | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Motor Part Number: 85556729
$418.44 MSRP: $661.02
You Save: $242.58 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit-Power Steering Assist; Power Steering Assist Motor
- Replaced by: 85776976
Fits the following Chevrolet Models:
- Silverado 1500 | 2022-2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 1500 LTD | 2022 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV, WT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Suburban | 2022 | Commercial, High Country, LS, LT, Premier, RST, Z71 | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Tahoe | 2022 | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
Chevrolet Motor Part Number: 85154057
$468.56 MSRP: $743.94
You Save: $275.38 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit-Power Steering Assist
- Replaced by: 86513828
Fits the following Chevrolet Models:
- Blazer | 2023-2024 | RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Motor Part Number: 84722749
$739.34 MSRP: $1266.18
You Save: $526.84 (42%)
ADD TO CART
Product Specifications
- Other Name: Motor Kit-Power Steering Assist
- Replaced by: 84774205
Fits the following Chevrolet Models:
- Silverado 1500 | 2017-2019 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, RST, SSV, WT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Silverado 1500 LD | 2019 | Custom, LT, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Suburban | 2017-2020 | LS, LT, Premier | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Tahoe | 2017-2020 | LS, LT, PPV, Premier, SSV | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
Chevrolet Motor Assembly Part Number: 19368295
$348.07 MSRP: $547.66
You Save: $199.59 (37%)
Product Specifications
- Other Name: Motor Kit, Power Steering; Power Steering Assist Motor; Motor; Motor, Power Steering
- Replaces: 15905861, 20824576
Fits the following Chevrolet Models:
- Equinox | 2007-2009 | LS, LT, LTZ | 6 Cyl 3.4 L GAS
- HHR | 2008-2010 | SS, SS Panel | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Motor Part Number: 22966597
Product Specifications
- Other Name: Motor Kit-Power Steering Assist
Fits the following Chevrolet Models:
- Colorado | 2015-2017 | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Motor, Rear Part Number: 26091591
Product Specifications
- Other Name: Motor Kit, Rear Wheel Steering Actuator; Motor Kit, Steering
- Position: Rear
Fits the following Chevrolet Models:
- Avalanche 1500 | 2002-2003 | Base, North Face, On Road Edition, WBH, Z71 | 8 Cyl 5.3 L GAS
- Avalanche 2500 | 2002-2003 | Base | 8 Cyl 8.1 L GAS
- Silverado 1500 | 2002-2004 | Base, LS, LT, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Silverado 1500 HD | 2002-2003 | LS, LT | 8 Cyl 6.0 L GAS
- Silverado 2500 | 2002-2004 | Base, LS, LT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Silverado 2500 HD | 2002-2004 | Base, LS, LT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Silverado 3500 | 2002-2004 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Suburban 1500 | 2002-2003 | LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Suburban 2500 | 2002-2003 | LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
- Tahoe | 2002-2003 | LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View More

Chevrolet Power Steering Assist Motor

Choose OEM Power Steering Assist Motor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Power Steering Assist Motor. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Power Steering Assist Motor Parts and Q&A

Motor Assembly
19368295
Q: How to replace the Power Steering Assist Motor on Chevrolet HHR?
A:
The first step when changing the power steering motor requires you to take out the Steering Column. The first step is to detach the tie strap from the power steering motor and disconnect its electrical cord. Position a cloth around the reduction unit followed by its installation into a vice with the reduction unit flange level and remove power steering motor bolts while removing the motor altogether. Wash away all grease from the reduction unit wormshaft space with a lint-free cotton cloth and equivalent products that must not contain solvents. When installing the power steering motor shaft you must apply the provided grease without using excessive amounts. The power steering motor should start smoothly but you should attempt another installation if it fails to start without coercion. Secure the power steering motor at its position then use three complete revolutions of the Steering Shaft to match the motor shaft direction to the reduction unit wormgear. You must prevent any forceful twisting motions to the motor while torquing bolts so alignment issues do not occur. The power steering motor bolts require torque of 18.5 nm (14 lb ft) and the electrical connector should be connected before installing a new tie strap followed by Steering Column reinstallation.