How to replace the Clutch Master Cylinder on Chevrolet Colorado?

The white plastic sleeve on the quick connect requires the hydraulic clutch line separator tool (J 42371) to ensure proper separation of the hydraulic Clutch Hose from the clutch actuator quick connect. Start the retainer removal from the clutch pedal pin through inserting a flat bladed tool between the Clutch Master Cylinder push rod and clutch pedal assembly to pry the push rod away. Then discard the retainer. First raise the vehicle for support before disconnecting the clutch hydraulic hose retainer from the vehicle's inner fender while maintaining a lowered position. A clockwise 1/8 turn rotation starts the procedure to remove the Clutch Master Cylinder and hydraulic hose from the cowl. Route the clutch hydraulic hose with the master cylinder under the brake booster before inserting the master cylinder into the cowl with the clutch fluid reservoir cap positioned at 1:30. Continue by rotating the cylinder counterclockwise 1/8 turn until it fully seats with the cap positioned at 12:00. Put the vehicle back into raised position while checking that the clutch hydraulic hose stays away from any hot or sharp components before pushing the quick connect fitting into the Clutch Slave Cylinder until a secure "click" sound occurs followed by gentle tug checks for correct retention. First attach the clutch hydraulic hose retainer to the inner fender under the vehicle while it is lowered. Then install a fresh retainer piece inside the master cylinder push rod before pushing the push rod onto the clutch pedal pin for security. Adjust the clutch release switch together with the clutch pedal position switch while performing necessary clutch hydraulic system bleeding.

How to replace the Clutch Master Cylinder on Chevrolet S10?

You need to start by taking off the master cylinder rod from the clutch pedal before you can unlock the Clutch Master Cylinder using a 45-degree clockwise turn. First disconnect the wiring harness from the Clutch Master Cylinder start switch before you detach the clips that secure the clutch line to both dash panel and heat shield. Remove the Clutch Master Cylinder from the dash panel then raise your vehicle while suspending it in place. Work with clutch line release tool (J 42371) to detach the clutch line from concentric slave cylinder before bringing down the vehicle to uninstall the Clutch Master Cylinder. Start by installing the new Clutch Master Cylinder before you raise the vehicle again. Before lowering your vehicle, connect the clutch line to the concentric slave cylinder by pulling back the connector sleeve. Secure the clutch line to the dash panel and heat shield using clips. Position the Clutch Master Cylinder into its cowl panel mounting hole then turn the cylinder by 45 degrees counterclockwise to secure it. Completion of the clutch project includes harnessing the start switch to the Clutch Master Cylinder alongside attaching the master cylinder rod to the pedal and performing a clutch bleed procedure.

OEM Chevrolet Clutch Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

66 Clutch Master Cylinders found

View related parts
Chevrolet Master Cylinder Part Number: 25196007
$59.27 MSRP: $94.12
You Save: $34.85 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder-Clutch Master; Clutch Master Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
- Replaced by: 25208379
- Replaces: 25186238
Fits the following Chevrolet Models:
- Spark | 2013-2015 | LS, LT | 4 Cyl 1.2 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 12572805
$145.59 MSRP: $239.84
You Save: $94.25 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly-Clutch Master; Clutch Master Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
- Replaces: 15048469, 12573372
Fits the following Chevrolet Models:
- Avalanche 1500 | 2002-2006 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Avalanche 2500 | 2002-2006 | Base, LS, LT | 8 Cyl 8.1 L GAS
- Silverado 1500 | 2001-2006 | Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Silverado 1500 HD | 2005-2006, 2001-2003 | Base, LS, LT | 8 Cyl 6.0 L GAS
- Silverado 2500 | 2001-2004 | Base, LS, LT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Silverado 2500 HD | 2001-2006 | Base, LS, LT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Silverado 3500 | 2001-2006 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Suburban 1500 | 2001-2006 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Suburban 2500 | 2001-2006 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
- Tahoe | 2001-2006 | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Master Cylinder Part Number: 19331709
$116.50 MSRP: $184.96
You Save: $68.46 (38%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Master; Clutch Master Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
- Replaced by: 19432063
Fits the following Chevrolet Models:
- Corvette | 2005-2013 | 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 12385321
$136.92 MSRP: $215.44
You Save: $78.52 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Hydraulic Clutch Main Cylinder; Clutch Master Cylinder
- Replaces: 15998928
Fits the following Chevrolet Models:
- S10 | 1994-1995 | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 25188983
$41.86 MSRP: $66.46
You Save: $24.60 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly-Clutch Master; Clutch Master Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
Fits the following Chevrolet Models:
- Spark | 2016-2021 | ACTIV, LS, LT | 4 Cyl 1.4 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 12571919
$133.26 MSRP: $209.69
You Save: $76.43 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly-Clutch Master; Clutch Master Cylinder; Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
- Replaces: 22632982
Fits the following Chevrolet Models:
- Classic | 2004 | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 22601783
$81.91 MSRP: $172.91
You Save: $91.00 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Hydraulic Clutch Main Cylinder; Clutch Master Cylinder
- Replaces: 22638609
Fits the following Chevrolet Models:
- Cavalier | 1995-1999 | Base, LS, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Slave Cylinder Part Number: 15232236
$189.29 MSRP: $311.70
You Save: $122.41 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Hydraulic Clutch Main Cylinder; Clutch Slave Cylinder
Fits the following Chevrolet Models:
- SSR | 2005-2006 | Base | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 12574148
$136.69 MSRP: $215.08
You Save: $78.39 (37%)
Product Specifications
- Other Name: Cylinder Assembly-Clutch Master; Clutch Master Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
- Replaces: 15064078, 15027984
Fits the following Chevrolet Models:
- Avalanche 1500 | 2002 | Base, North Face, On Road Edition, Z71 | 8 Cyl 5.3 L GAS
- Avalanche 2500 | 2002 | Base | 8 Cyl 8.1 L GAS
- Silverado 1500 | 2001-2002 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 HD | 2001-2002 | LS, LT | 8 Cyl 6.0 L GAS
- Silverado 2500 | 2001-2002 | Base, LS, LT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Silverado 2500 HD | 2001-2002 | Base, LS, LT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Silverado 3500 | 2001-2002 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Suburban 1500 | 2001-2002 | Base, LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Suburban 2500 | 2001-2002 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
- Tahoe | 2001-2002 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Master Cylinder Part Number: 15727261
$192.34 MSRP: $302.50
You Save: $110.16 (37%)
Product Specifications
- Other Name: Cylinder Assembly-Clutch Master; Clutch Master Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
- Replaces: 15740931
Fits the following Chevrolet Models:
- C1500 | 1996-1999 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1996-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1996-2000 | Base, Cheyenne, LS, Silverado, WT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1996-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1996-2000 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 | 1996-1999 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1996-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1996-2000 | Base, Cheyenne, LS, Silverado, WT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1996-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K3500 | 1996-2000 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Master Cylinder Part Number: 15594142
Product Specifications
- Other Name: Cylinder, Hydraulic Clutch Main Cylinder; Clutch Master Cylinder
Fits the following Chevrolet Models:
- S10 | 1984-1986 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- S10 Blazer | 1984-1986 | Base, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 15051973
Product Specifications
- Other Name: Cylinder, Hydraulic Clutch Main Cylinder; Clutch Master Cylinder
- Replaces: 15153421, 15733571
Fits the following Chevrolet Models:
- Blazer | 1996-2000 | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
- S10 | 1996-2000 | Base, LS, SS, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 12385319
Product Specifications
- Other Name: Cylinder Assembly, Clutch Master; Clutch Master Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
Fits the following Chevrolet Models:
- S10 Blazer | 1994 | Base, LT, Tahoe, Tahoe LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 12584955
Product Specifications
- Other Name: Cylinder Assembly-Clutch Master; Clutch Master Cylinder; Cylinder, Hydraulic Clutch Main Cylinder
- Replaces: 12574150, 15762468
Fits the following Chevrolet Models:
- Blazer | 2001-2005 | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- S10 | 2001-2003 | Base, LS, Xtreme, ZR2, ZR5 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Master Cylinder Assembly Part Number: 12527718
Product Specifications
- Other Name: Cylinder, Hydraulic Clutch Main Cylinder; Clutch Master Cylinder
Fits the following Chevrolet Models:
- Camaro | 1984-1992 | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Master Cylinder Repair Kit Part Number: 94846047
Product Specifications
- Other Name: Cylinder Kit, Hydraulic Clutch Main Cylinder
Fits the following Chevrolet Models:
- Nova | 1985-1988 | Base, CL, Twin Cam | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Master Cylinder Repair Kit Part Number: 15579688
Product Specifications
- Other Name: Cylinder Kit; Cylinder Kit, Hydraulic Clutch Main Cylinder; Repair Kit, Hydraulic Clutch Main Cylinder
Fits the following Chevrolet Models:
- S10 | 1984-1991 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
- S10 Blazer | 1984-1991 | Base, High Country, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Master Cylinder Repair Kit Part Number: 94859175
Product Specifications
- Other Name: Cylinder Kit, Hydraulic Clutch Main Cylinder
Fits the following Chevrolet Models:
- Prizm | 1998-2002 | Base, LSi | 4 Cyl 1.8 L GAS
View related parts
Chevrolet Master Cylinder Repair Kit Part Number: 14079421
Fits the following Chevrolet Models:
- Corvette | 1984-1991 | 35th Anniversary Edition, Base, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Master Cylinder Part Number: 96652647
Product Specifications
- Other Name: Cylinder, Hydraulic Clutch Main Cylinder; Clutch Master Cylinder
- Replaces: 96652667, 96339733
Fits the following Chevrolet Models:
- Aveo | 2004-2005 | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

| Page 1 of 4 |Next >

1-20 of 66 Results

Chevrolet Clutch Master Cylinder

Choose OEM Clutch Master Cylinder, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Clutch Master Cylinder. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Clutch Master Cylinder Parts and Q&A

Master Cylinder
24249143
Q: How to replace the Clutch Master Cylinder on Chevrolet Colorado?
A:
The white plastic sleeve on the quick connect requires the hydraulic clutch line separator tool (J 42371) to ensure proper separation of the hydraulic Clutch Hose from the clutch actuator quick connect. Start the retainer removal from the clutch pedal pin through inserting a flat bladed tool between the Clutch Master Cylinder push rod and clutch pedal assembly to pry the push rod away. Then discard the retainer. First raise the vehicle for support before disconnecting the clutch hydraulic hose retainer from the vehicle's inner fender while maintaining a lowered position. A clockwise 1/8 turn rotation starts the procedure to remove the Clutch Master Cylinder and hydraulic hose from the cowl. Route the clutch hydraulic hose with the master cylinder under the brake booster before inserting the master cylinder into the cowl with the clutch fluid reservoir cap positioned at 1:30. Continue by rotating the cylinder counterclockwise 1/8 turn until it fully seats with the cap positioned at 12:00. Put the vehicle back into raised position while checking that the clutch hydraulic hose stays away from any hot or sharp components before pushing the quick connect fitting into the Clutch Slave Cylinder until a secure "click" sound occurs followed by gentle tug checks for correct retention. First attach the clutch hydraulic hose retainer to the inner fender under the vehicle while it is lowered. Then install a fresh retainer piece inside the master cylinder push rod before pushing the push rod onto the clutch pedal pin for security. Adjust the clutch release switch together with the clutch pedal position switch while performing necessary clutch hydraulic system bleeding.
Master Cylinder
12574149
Q: How to replace the Clutch Master Cylinder on Chevrolet S10?
A:
You need to start by taking off the master cylinder rod from the clutch pedal before you can unlock the Clutch Master Cylinder using a 45-degree clockwise turn. First disconnect the wiring harness from the Clutch Master Cylinder start switch before you detach the clips that secure the clutch line to both dash panel and heat shield. Remove the Clutch Master Cylinder from the dash panel then raise your vehicle while suspending it in place. Work with clutch line release tool (J 42371) to detach the clutch line from concentric slave cylinder before bringing down the vehicle to uninstall the Clutch Master Cylinder. Start by installing the new Clutch Master Cylinder before you raise the vehicle again. Before lowering your vehicle, connect the clutch line to the concentric slave cylinder by pulling back the connector sleeve. Secure the clutch line to the dash panel and heat shield using clips. Position the Clutch Master Cylinder into its cowl panel mounting hole then turn the cylinder by 45 degrees counterclockwise to secure it. Completion of the clutch project includes harnessing the start switch to the Clutch Master Cylinder alongside attaching the master cylinder rod to the pedal and performing a clutch bleed procedure.