How to replace the front brake calipers on an AWD on Cadillac CTS?

Before starting work on an awd brake caliper replacement you must inspect the brake master cylinder reservoir; keep the fluid level at midway when it stands between maximum and minimum marks. Place the vehicle on stands then take off both the tire and wheel set. Squeeze brake caliper pistons by tightening a c-clamp against both the outer Brake Pad and the back side of brake caliper body at a measured pace. First apply the back up wrench on brake caliper guide pin to remove the brake caliper guide pin bolts and the brake hose fitting bolt. Now you can take off the brake hose fitting gaskets and brake hose while disposing the gaskets. Disassemble the brake caliper for inspections of its guide pins, seals and Brake Pad springs for issues. Attach the brake hose fitting bolt to the brake hose with new gaskets and place the parts onto the brake caliper before tightening the bolt to 49 n.m (36 lb ft). Thoroughly clean the threads of brake caliper guide pin bolts with denatured alcohol and apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) to 2/3 of their length until they reach their full depth without any gaps. Install the brake caliper guide pin bolts when the threadlocker has cured for 10 minutes. Set the torque at 27 n.m for je5 and 65 n.m for j55. Open the brake system vents before putting back the tire and wheel components. While the engine remains off press and release the brake pedal two-thirds of its total range twice until you reach a proper firmness. Add fluid up to the indicated mark in the brake master cylinder storage tank.

How to replace the rear brake calipers on the 1500 Series on Cadillac Escalade?

Begin 1500 series rear brake caliper replacement by inspecting brake master cylinder reservoir fluid before proceeding. Replace brake fluid if it exceeds the midpoint between full capacity and minimum limits. Drain fluid to match that midpoint. After vehicle support lift the vehicle up and take out the tire along with the wheel assembly. Apply cleaning solution to the brake hose fitting then insert a large c-clamp onto the caliper housing to compress the caliper piston fully back against the outboard pad before removing the clamp. Accommodate the brake pipe with caps or plugs in order to stop fluid leaking and prevent contamination. Remove the brake hose to caliper bolt but examine the copper gaskets to verify they do not stick to either hardware before discarding both gaskets and installing new gaskets. When removing guide pin bolts maintain control of the guide pin by using an open-end wrench that ensures the brake caliper remains untouched to minimize pulsation. Pull the brake caliper out of its mounting bracket position. The new brake caliper gets attached to its mounting bracket then thread guide pin bolting gets cleaned with brake parts cleaner followed by threadlocker gm p/n 12345493 (Canadian P/N 10953488) thread application. Secure the guide pin bolts using hand tools but maintain grip on the pins to achieve 38 n.m (28 lb ft) torque. Replace the rubber cap from the brake hose fitting with two new copper gaskets before securing the brake hose by tightening the caliper bolt to 40 n.m (30 lb ft). Custom degassing of the hydraulic brake system must be performed after tire and wheel assembly installation and then reservoir fluid levels should be maintained with new brake fluid if the current amount falls short.

OEM Cadillac Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

293 Brake Calipers found

View related parts
Cadillac Caliper, Yellow, Driver Side Part Number: 20982719
$501.88 MSRP: $906.83
You Save: $404.95 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
Fits the following Cadillac Models:
- CTS | 2011-2014 | V, Vsport, Vsport Premium | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Silver, Passenger Side Part Number: 25911233
$452.80 MSRP: $884.88
You Save: $432.08 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
Fits the following Cadillac Models:
- CTS | 2009-2015 | V, Vsport, Vsport Premium | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper Part Number: 89047727
$245.96 MSRP: $475.73
You Save: $229.77 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
Fits the following Cadillac Models:
- CTS | 2004-2007 | V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Caliper Part Number: 89047726
$216.08 MSRP: $421.40
You Save: $205.32 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
Fits the following Cadillac Models:
- CTS | 2004-2007 | V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Caliper, Red, Rear Driver Side Part Number: 84945122
$122.26 MSRP: $221.28
You Save: $99.02 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Red; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Replaces: 84794971
Fits the following Cadillac Models:
- CT5 | 2020-2024 | Luxury, Premium Luxury, Sport, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac Caliper, Rear Driver Side Part Number: 23309772
$273.94 MSRP: $514.45
You Save: $240.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
Fits the following Cadillac Models:
- CTS | 2016-2019 | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Black, Passenger Side Part Number: 84740710
$214.61 MSRP: $401.44
You Save: $186.83 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Cadillac Models:
- CT5 | 2020-2024 | Sport, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac Caliper, Red, Passenger Side Part Number: 84740708
$303.78 MSRP: $548.30
You Save: $244.52 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads); Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Cadillac Models:
- CT5 | 2020-2024 | Sport, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac Caliper, Blue, Rear Driver Side Part Number: 84794925
$72.54 MSRP: $131.30
You Save: $58.76 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Blue; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
Fits the following Cadillac Models:
- CT4 | 2020-2024 | Premium Luxury, Sport, V | 4 Cyl 2.0 L GAS, 4 Cyl 2.7 L GAS
View related parts
Cadillac Caliper, Tech Bronze, Driver Side Part Number: 84749858
$454.92 MSRP: $852.74
You Save: $397.82 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Tech Bronze; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
Fits the following Cadillac Models:
- CT4 | 2022-2024 | V Blackwing | 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper, Red, Rear Driver Side Part Number: 23309774
$327.27 MSRP: $590.83
You Save: $263.56 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
Fits the following Cadillac Models:
- CTS | 2016-2019 | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Black, Driver Side Part Number: 84740711
$214.61 MSRP: $401.44
You Save: $186.83 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
Fits the following Cadillac Models:
- CT5 | 2020-2024 | Sport, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac Caliper, Tech Bronze, Passenger Side Part Number: 84749859
$454.92 MSRP: $852.74
You Save: $397.82 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Tech Bronze; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Cadillac Models:
- CT4 | 2022-2024 | V Blackwing | 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper, Bronze, Driver Side Part Number: 84893059
$627.13 MSRP: $1177.70
You Save: $550.57 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Tech Bronz; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
Fits the following Cadillac Models:
- CT5 | 2022-2024 | V Blackwing | 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Royal Blue, Driver Side Part Number: 84984076
$392.18 MSRP: $734.93
You Save: $342.75 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Royal Blue L; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
Fits the following Cadillac Models:
- CT5 | 2022-2024 | Luxury, Premium Luxury, Sport, V, V Blackwing | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Tech Bronze, Passenger Side Part Number: 84984071
$465.69 MSRP: $872.96
You Save: $407.27 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Tech Bronze; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Cadillac Models:
- CT5 | 2022-2024 | Luxury, Premium Luxury, Sport, V, V Blackwing | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Red, Passenger Side Part Number: 84894432
$546.65 MSRP: $1025.01
You Save: $478.36 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Edge Red T; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following Cadillac Models:
- CT5 | 2022-2024 | V Blackwing | 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Tech Bronze Part Number: 84984079
$332.68 MSRP: $600.62
You Save: $267.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Tech Bronze; Caliper, Wheel Brake Cylinder/Caliper
Fits the following Cadillac Models:
- CT4 | 2022-2024 | V Blackwing | 6 Cyl 3.6 L GAS
- CT5 | 2022-2024 | Luxury, Premium Luxury, Sport, V, V Blackwing | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Yellow, Driver Side Part Number: 20982644
$315.13 MSRP: $609.97
You Save: $294.84 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
Fits the following Cadillac Models:
- CTS | 2011-2014 | V, Vsport, Vsport Premium | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Caliper, Red, Rear Passenger Side Part Number: 13542169
$58.92 MSRP: $110.65
You Save: $51.73 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Red; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
Fits the following Cadillac Models:
- CT5 | 2020-2024 | Luxury, Premium Luxury, Sport, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 15 |Next >

1-20 of 293 Results

Cadillac Brake Calipers

Choose OEM Brake Calipers, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Brake Calipers. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Cadillac Brake Calipers Parts and Q&A

Caliper
15851351
Q: How to replace the front brake calipers on an AWD on Cadillac CTS?
A:
Before starting work on an awd brake caliper replacement you must inspect the brake master cylinder reservoir; keep the fluid level at midway when it stands between maximum and minimum marks. Place the vehicle on stands then take off both the tire and wheel set. Squeeze brake caliper pistons by tightening a c-clamp against both the outer Brake Pad and the back side of brake caliper body at a measured pace. First apply the back up wrench on brake caliper guide pin to remove the brake caliper guide pin bolts and the brake hose fitting bolt. Now you can take off the brake hose fitting gaskets and brake hose while disposing the gaskets. Disassemble the brake caliper for inspections of its guide pins, seals and Brake Pad springs for issues. Attach the brake hose fitting bolt to the brake hose with new gaskets and place the parts onto the brake caliper before tightening the bolt to 49 n.m (36 lb ft). Thoroughly clean the threads of brake caliper guide pin bolts with denatured alcohol and apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) to 2/3 of their length until they reach their full depth without any gaps. Install the brake caliper guide pin bolts when the threadlocker has cured for 10 minutes. Set the torque at 27 n.m for je5 and 65 n.m for j55. Open the brake system vents before putting back the tire and wheel components. While the engine remains off press and release the brake pedal two-thirds of its total range twice until you reach a proper firmness. Add fluid up to the indicated mark in the brake master cylinder storage tank.
Caliper, Rear Passenger Side
84191287
Q: How to replace the rear brake calipers on the 1500 Series on Cadillac Escalade?
A:
Begin 1500 series rear brake caliper replacement by inspecting brake master cylinder reservoir fluid before proceeding. Replace brake fluid if it exceeds the midpoint between full capacity and minimum limits. Drain fluid to match that midpoint. After vehicle support lift the vehicle up and take out the tire along with the wheel assembly. Apply cleaning solution to the brake hose fitting then insert a large c-clamp onto the caliper housing to compress the caliper piston fully back against the outboard pad before removing the clamp. Accommodate the brake pipe with caps or plugs in order to stop fluid leaking and prevent contamination. Remove the brake hose to caliper bolt but examine the copper gaskets to verify they do not stick to either hardware before discarding both gaskets and installing new gaskets. When removing guide pin bolts maintain control of the guide pin by using an open-end wrench that ensures the brake caliper remains untouched to minimize pulsation. Pull the brake caliper out of its mounting bracket position. The new brake caliper gets attached to its mounting bracket then thread guide pin bolting gets cleaned with brake parts cleaner followed by threadlocker gm p/n 12345493 (Canadian P/N 10953488) thread application. Secure the guide pin bolts using hand tools but maintain grip on the pins to achieve 38 n.m (28 lb ft) torque. Replace the rubber cap from the brake hose fitting with two new copper gaskets before securing the brake hose by tightening the caliper bolt to 40 n.m (30 lb ft). Custom degassing of the hydraulic brake system must be performed after tire and wheel assembly installation and then reservoir fluid levels should be maintained with new brake fluid if the current amount falls short.