How to remove and replace the brake caliper bracket (JE5) on Cadillac CTS?

To replace the Brake Caliper Bracket (JE5), first secure a firm brake pedal before bringing the vehicle to get rid of any personal injuries. Start by taking off the brake caliper from the Brake Caliper Bracket using heavy mechanic wire so as to prevent damage to the hydraulic flexible brake hose. Then, unscrew brake pads from the Brake Caliper Bracket, as well as Brake Pad retainers , brake caliper guide pins, and brake caliper boot. Following that, remove the Brake Caliper Bracket mounting bolts and the Brake Caliper Bracket from the knuckle, be sure to check the bracket for cracks or damage, replacing as needed. For installation, install the Brake Caliper Bracket to the knuckle, and make sure the threads of the caliper bracket bolt and the knuckle mounting hole threads are free of any contaminants before increasing the gm p/n 12345493 (Canada P/N 10953488) threadlocker at the lower 2/3 of the longer threaded portion of the lower caliper bracket, and allowing it to absorb within the length of the lower threaded caliper bracket, for about 10-minutes. Put on the 2 Brake Caliper Bracket bolts, and tighten them to 130 n.m (96 lb ft). Make sure caliper guide pin boots are seated in their respective retaining seats before installing caliper guide pins and ensuring proper seating. Move on to install the Brake Pad retainers and brake pads to the Brake Caliper Bracket , and finally attach brake caliper to the front Brake Caliper Bracket.

How to replace the front brake caliper bracket on the 1500 Series on Cadillac Escalade?

The Brake Caliper Bracket replacement process on the 1500 series requires vehicle lifting followed by tire and wheel removal. A heavy mechanic wire or equivalent should be used to brace the brake caliper after removal when the hydraulic flexible brake hose stays connected to avoid flexible brake hose damage and brake fluid leaks. By following the proper support process for the caliper you can remove it while the brake hose stays connected. Begin by marking where brake pads need to go for later installation. Move on to remove the brake pads together with their springs followed by Brake Caliper Bracket mounting bolts and finally the bracket. Installation starts with Brake Caliper Bracket placement followed by complete removal of original adhesive residue and bolting threads cleaning with denatured alcohol. Wait for them to dry before applying threadlocker gm p/n 12345493 (Canadian P/N 10953488). Before bolt installation, apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) to the mounting bolt threads. Secure the bolts with a torque of 200 n.m (148 lb ft). Place Brake Pad springs and brake pads where you removed them before moving on. Put the brake caliper onto the bracket first before putting back the tire and wheel assembly and topping up the master cylinder reservoir with clean brake fluid if needed.

OEM Cadillac Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

58 Brake Caliper Brackets found

View related parts
Cadillac Caliper Support Part Number: 20957797
$29.54 MSRP: $55.48
You Save: $25.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
- Replaces: 20780993, 25997457, 15853361
Fits the following Cadillac Models:
- SRX | 2010-2016 | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper Support, Front Part Number: 13588988
$29.13 MSRP: $54.69
You Save: $25.56 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following Cadillac Models:
- CT4 | 2020-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.7 L GAS
View related parts
Cadillac Caliper Support Part Number: 84273805
$68.14 MSRP: $127.96
You Save: $59.82 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
Fits the following Cadillac Models:
- CT6 | 2019-2020 | Platinum, V | 8 Cyl 4.2 L GAS
View related parts
Cadillac Caliper Support Part Number: 13542416
$44.49 MSRP: $80.53
You Save: $36.04 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket
- Position: Front
- Replaced by: 13555623
Fits the following Cadillac Models:
- LYRIQ | 2023-2024 | Luxury, Sport, Tech | BATTERY EV (EV/BEV)
View related parts
Cadillac Caliper Support, Red, Rear Passenger Side Part Number: 13525897
$52.64 MSRP: $95.28
You Save: $42.64 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
Fits the following Cadillac Models:
- XT4 | 2019-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS
View related parts
Cadillac Caliper Support Part Number: 13542417
$59.84 MSRP: $108.30
You Save: $48.46 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following Cadillac Models:
- XT5 | 2021-2023 | Livery, Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- XT6 | 2021-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper Support Part Number: 25997463
$36.85 MSRP: $69.20
You Save: $32.35 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
- Replaces: 15853417
Fits the following Cadillac Models:
- CTS | 2008-2014 | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper Support, Black, Passenger Side Part Number: 85569600
$75.42 MSRP: $146.38
You Save: $70.96 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper *Black; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Replaces: 25910435
Fits the following Cadillac Models:
- Escalade | 2020 | Base, Luxury, Platinum, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Escalade ESV | 2019-2020 | Base, Luxury, Platinum, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Actuator Bracket Part Number: 13514395
$28.49 MSRP: $53.50
You Save: $25.01 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Parking Brake Actuator Bracket
- Position: Rear
- Replaces: 13597333
Fits the following Cadillac Models:
- XT4 | 2019-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS
View related parts
Cadillac Caliper Support Part Number: 85562322
$102.71 MSRP: $192.88
You Save: $90.17 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper
Fits the following Cadillac Models:
- XT5 | 2022-2023 | Livery, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- XT6 | 2022-2024 | Sport | 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper Support, Front Part Number: 13509700
$47.21 MSRP: $88.66
You Save: $41.45 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following Cadillac Models:
- XT5 | 2017-2020 | Base, Luxury, Platinum, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- XT6 | 2020 | Premium Luxury, Sport | 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper Mount, Red, Front Part Number: 13529533
$23.50 MSRP: $42.54
You Save: $19.04 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following Cadillac Models:
- CT5 | 2020-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
- XT4 | 2020-2023 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS
View related parts
Cadillac Caliper Support, Front Part Number: 25983766
$44.10 MSRP: $79.81
You Save: $35.71 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 21993097
Fits the following Cadillac Models:
- DTS | 2006-2011 | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac Caliper Support, Red Part Number: 84745068
$42.07 MSRP: $65.90
You Save: $23.83 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
Fits the following Cadillac Models:
- CT4 | 2020-2024 | Sport, V | 4 Cyl 2.0 L GAS, 4 Cyl 2.7 L GAS
- CT5 | 2020-2024 | Sport, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Cadillac Caliper Mount Part Number: 88957163
$71.02 MSRP: $111.25
You Save: $40.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Carrier
- Position: Rear
Fits the following Cadillac Models:
- CTS | 2006-2007 | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS
- SRX | 2004-2009 | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
- STS | 2005-2011 | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View More
View related parts
Cadillac Caliper Support, Red, Rear Driver Side Part Number: 13529087
$57.75 MSRP: $95.13
You Save: $37.38 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
Fits the following Cadillac Models:
- XT4 | 2021-2022 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS
View related parts
Cadillac Caliper Support, Rear Driver Side Part Number: 13533568
$58.20 MSRP: $92.41
You Save: $34.21 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Replaces: 13578098
Fits the following Cadillac Models:
- XTS | 2013-2019 | Base, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium, Vsport Premium Luxury | 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper Support, Red Part Number: 84725174
$52.82 MSRP: $83.86
You Save: $31.04 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper *Calibrate Chart Round H; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 84804895
Fits the following Cadillac Models:
- XT4 | 2021-2023 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS
View related parts
Cadillac Caliper Support, Rear Passenger Side Part Number: 13533567
$57.50 MSRP: $94.72
You Save: $37.22 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Replaces: 13578100
Fits the following Cadillac Models:
- XTS | 2013-2019 | Base, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium, Vsport Premium Luxury | 6 Cyl 3.6 L GAS
View related parts
Cadillac Caliper Support Part Number: 13407179
$14.68 MSRP: $23.00
You Save: $8.32 (37%)
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
Fits the following Cadillac Models:
- ELR | 2015-2016 | Base | 4 Cyl 1.4 L PLUG-IN HYBRID EV-GAS (PHEV)

| Page 1 of 3 |Next >

1-20 of 58 Results

Cadillac Brake Caliper Bracket

Choose OEM Brake Caliper Bracket, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Brake Caliper Bracket. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Cadillac Brake Caliper Bracket tightens the pads to provide consistent stopping force in every mile. Cadillac was born in 1902 and established a reputation of aggressive styling, V8 confidence and fearless readiness to roll out fresh ideas before its competitors could even open their eyes, which resonates today in chrome flashes and LED blades. Cadillac stuffs its interiors with supple cabins, crisp digital dashboards, head-up displays, and magnetic ride control that transforms crumbled asphalt into velvet, thus making a daily commute seem more like a cool cruise along the coast. Since time-honored tail fins through to the hand-made Celestiq, Cadillac continues to take concepts to the next level instead of merely being behind the curve, and heritage is nothing without having the courage to reinvent it. The Brake Caliper Bracket attaches the caliper to the knuckle and orients the pad faces level on the rotor and endures the savage shear forces which surge each time you slam the pedal at highway velocity. Forged steel provides the Brake Caliper Bracket with the strength to shoulder the heat cycles without distorting and pedal feel remains sharp throughout the months. When the system snaps back to factory bite the damage is already corroding and the Brake Caliper Bracket is swapped in with a fresh one to keep the rotors and pads safe and win driver confidence again.

Cadillac Brake Caliper Bracket Parts and Q&A

Caliper Mount
88957163
Q: How to remove and replace the brake caliper bracket (JE5) on Cadillac CTS?
A:
To replace the Brake Caliper Bracket (JE5), first secure a firm brake pedal before bringing the vehicle to get rid of any personal injuries. Start by taking off the brake caliper from the Brake Caliper Bracket using heavy mechanic wire so as to prevent damage to the hydraulic flexible brake hose. Then, unscrew brake pads from the Brake Caliper Bracket, as well as Brake Pad retainers , brake caliper guide pins, and brake caliper boot. Following that, remove the Brake Caliper Bracket mounting bolts and the Brake Caliper Bracket from the knuckle, be sure to check the bracket for cracks or damage, replacing as needed. For installation, install the Brake Caliper Bracket to the knuckle, and make sure the threads of the caliper bracket bolt and the knuckle mounting hole threads are free of any contaminants before increasing the gm p/n 12345493 (Canada P/N 10953488) threadlocker at the lower 2/3 of the longer threaded portion of the lower caliper bracket, and allowing it to absorb within the length of the lower threaded caliper bracket, for about 10-minutes. Put on the 2 Brake Caliper Bracket bolts, and tighten them to 130 n.m (96 lb ft). Make sure caliper guide pin boots are seated in their respective retaining seats before installing caliper guide pins and ensuring proper seating. Move on to install the Brake Pad retainers and brake pads to the Brake Caliper Bracket , and finally attach brake caliper to the front Brake Caliper Bracket.
Caliper Support
15265833
Q: How to replace the front brake caliper bracket on the 1500 Series on Cadillac Escalade?
A:
The Brake Caliper Bracket replacement process on the 1500 series requires vehicle lifting followed by tire and wheel removal. A heavy mechanic wire or equivalent should be used to brace the brake caliper after removal when the hydraulic flexible brake hose stays connected to avoid flexible brake hose damage and brake fluid leaks. By following the proper support process for the caliper you can remove it while the brake hose stays connected. Begin by marking where brake pads need to go for later installation. Move on to remove the brake pads together with their springs followed by Brake Caliper Bracket mounting bolts and finally the bracket. Installation starts with Brake Caliper Bracket placement followed by complete removal of original adhesive residue and bolting threads cleaning with denatured alcohol. Wait for them to dry before applying threadlocker gm p/n 12345493 (Canadian P/N 10953488). Before bolt installation, apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) to the mounting bolt threads. Secure the bolts with a torque of 200 n.m (148 lb ft). Place Brake Pad springs and brake pads where you removed them before moving on. Put the brake caliper onto the bracket first before putting back the tire and wheel assembly and topping up the master cylinder reservoir with clean brake fluid if needed.