How to Remove and Overhaul Brake Calipers on Cadillac Escalade?

Elements in the delco brake system require you to first drain two-thirds of the master cylinder's fluid before starting repairs. Set the car on stands that will offer secure support. Unscrew the two lug nuts holding the rotor, keep them aside and lift the tire and wheel off the car. Ease the Piston with pliers adjusted over inboard lining tab and brake caliper flange, lift off the brake hose from the inlet fitting. After that, remove the bolts (1), (2) and the bolt boots (1), (2) before you remove the caliper. Check inside the caliper for any liquid coming out; should you see any signs of leakage, complete the brake caliper overhaul. Get rid of the bolt seals in the mounting bolts and remove the bushings as well. Inspect the mounting bolts as well as the sleeves and change any corroded pieces without trying to brush or polish away the corrosion. Before changing to a new rotor, clear the caliper and install a new brake hardware kit and repeat this with every rotor swap. Look over the bolt boots to check for damage such as nicks or corrosion and change any parts that you find damaged. Install the bushings and seals, add some gm p/n 18010909 or the equivalent lubricant and then install the cap. Attach the new bolt boots (1), (2) and caliper, then put gm p/n 18010909 or a similar lubricant into the holes between the bushings. Put the mounting bolt and sleeve assembly in place and tighten the bolt to 51 nm (38 ft. Lbs.) while keeping the bolt boots safe. Join the brake hose to the caliper firmly and tighten the bolt on the hose to 45 nm (33 ft. Lbs.). Check how much space there is between the caliper and the bracket stops; if more space is needed, take out the caliper and use a file to clear out the bracket ends so that there is a total clearance of 0.26 to 0.60 mm (0.010 to 0.024 inch). Calculate the gaps one at a time and sum them up. Pull the brake pedal all the way after you notice it's firm and after that, check the fluid level in the master cylinder. Next, put the tire and wheel onto the car.

How to replace the front brake calipers on Cadillac Escalade?

Start by assessing the brake master cylinder reservoir fluid level; if it stands around the mid-mark no fluid needs to be drained but if fluid is above this mark you must bring the liquid to the halfway point. Lift up the vehicle and take off the wheel and tire setup. Push brake caliper pistons firmly into position using a c-clamp on top of the housing against the back of the outboard pad. Insert a rubber plug over the brake pipe opening at its end to seal fluid while cleaning the brake hose for installation. Take the brake hose to caliper bolt loose and throw away its 2 copper brake hose gaskets since they may be stuck to caliper housing or hose end before detaching the brake hose from caliper. Take off the 2 brake caliper bolts while being careful not to push down on the brake pedal with the open brake system components. Detach the brake caliper from its mount. Position the brake caliper onto its mounting bracket and use 2 mounting bolts to fasten it before tightening to 108 nm (80 ft. Lbs.). Replace the rubber brake hose cap and attach the 2 new copper gaskets under it with the caliper bolt. Tighten the bolt to 40 nm (30 ft. Lbs.) when mounting it on the brake caliper. Drain the hydraulic brake system fluids before restating tire and wheel components down the vehicle then refill the brake tank to its correct fluid mark.

OEM Cadillac Escalade Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 Brake Calipers found

View related parts
Cadillac Escalade Caliper, Rear Passenger Side Part Number: 84191287
$136.73 MSRP: $266.06
You Save: $129.33 (49%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket; Brake Caliper
- Position: Rear Passenger Side
- Replaced by: 86785192
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Rear Driver Side Part Number: 84191288
$136.61 MSRP: $263.52
You Save: $126.91 (49%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket; Brake Caliper
- Position: Rear Driver Side
- Replaced by: 86785193
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper Part Number: 86824272
$520.91 MSRP: $976.67
You Save: $455.76 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Torch Red D; Caliper, Wheel Brake Cylinder/Caliper; Caliper, Brakes
- Replaced by: 86555787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Red, Passenger Side Part Number: 84871943
$194.19 MSRP: $364.68
You Save: $170.49 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Edge Red; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Red Caliper, Rear Part Number: 85539312
$322.82 MSRP: $606.24
You Save: $283.42 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaced by: 85082366
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Red Caliper Part Number: 85136400
$196.33 MSRP: $355.34
You Save: $159.01 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Caliper, Wheel Brake Cylinder/Caliper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Red Caliper, Rear Part Number: 85539313
$303.94 MSRP: $550.12
You Save: $246.18 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper Part Number: 85136404
$173.00 MSRP: $324.88
You Save: $151.88 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Torch Red; Caliper, Wheel Brake Cylinder/Caliper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Red, Driver Side Part Number: 84871940
$194.19 MSRP: $364.68
You Save: $170.49 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket) *Edge Red; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Driver Side Part Number: 18040100
$171.88 MSRP: $331.97
You Save: $160.09 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Replaced by: 19331022
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Cadillac Escalade | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Caliper, Red Caliper Part Number: 86824273
$450.64 MSRP: $714.15
You Save: $263.51 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Performance D; Caliper, Wheel Brake Cylinder/Caliper; Caliper, Brakes
- Replaced by: 86555788
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Red, Passenger Side Part Number: 86793186
$520.07 MSRP: $856.73
You Save: $336.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Edge Red; Caliper, Wheel Brake Cylinder/Caliper; Caliper, Brakes
- Position: Passenger Side
- Replaced by: 86555784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper, Red, Driver Side Part Number: 86793185
$546.07 MSRP: $899.55
You Save: $353.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Front Brake (W/O Brake Pads & Bracket*Edge Red; Caliper, Wheel Brake Cylinder/Caliper; Caliper, Brakes
- Position: Driver Side
- Replaced by: 86555783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Caliper Part Number: 88967106
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Cadillac Escalade | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Caliper Part Number: 88967107
Product Specifications
- Other Name: Caliper Assembly, Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Cadillac Escalade | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Caliper, Driver Side Part Number: 18043520
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Caliper, Passenger Side Part Number: 18043521
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Overhaul Kit, Rear Part Number: 18043518
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Caliper, Front Part Number: 18014745
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Caliper, Front Part Number: 18014744
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 30 Results

Cadillac Escalade Brake Calipers

Want to cut long-term maintenance and repair costs? Choose OEM Brake Calipers. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade Brake Calipers includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Cadillac Escalade possesses a Brake Caliperss for Braking System; this is a clamp that squeezes the brake pads against the brake rotors to break the wheel rotation. Depending on the car model, the pistons of the caliper, which is pressed to the disk, may be fixed or floating: when the brake pedal is engaged, hydraulic pressure from the brake fluid proceeds. Diaphragm type, in which the calipers are fixed on the mount with piston on each side of the rotor, though more expensive, outperform floating ones. Unlike the earlier type of calipers, or the floating calipers also known as the sliding calipers, they use only one piston and slide along the rotor, which results in some problems such as sticking and ultimately, uneven wear. Like any other brake calipers, those of Escalade may develop some problems with use and include side pulls, fluid leaks, grinding sounds, etc. Calipers must be checked more often, as they wear out in 10 years or up to 100000 miles but can fail at any time due to rust, corrosion or a damaged seal. Maintenance helps to avoid danger and guarantee the effectiveness of the braking system in Cadillac Escalade automobiles.

Cadillac Escalade Brake Calipers Parts and Q&A

Caliper, Front
18014744
Q: How to Remove and Overhaul Brake Calipers on Cadillac Escalade?
A:
Elements in the delco brake system require you to first drain two-thirds of the master cylinder's fluid before starting repairs. Set the car on stands that will offer secure support. Unscrew the two lug nuts holding the rotor, keep them aside and lift the tire and wheel off the car. Ease the Piston with pliers adjusted over inboard lining tab and brake caliper flange, lift off the brake hose from the inlet fitting. After that, remove the bolts (1), (2) and the bolt boots (1), (2) before you remove the caliper. Check inside the caliper for any liquid coming out; should you see any signs of leakage, complete the brake caliper overhaul. Get rid of the bolt seals in the mounting bolts and remove the bushings as well. Inspect the mounting bolts as well as the sleeves and change any corroded pieces without trying to brush or polish away the corrosion. Before changing to a new rotor, clear the caliper and install a new brake hardware kit and repeat this with every rotor swap. Look over the bolt boots to check for damage such as nicks or corrosion and change any parts that you find damaged. Install the bushings and seals, add some gm p/n 18010909 or the equivalent lubricant and then install the cap. Attach the new bolt boots (1), (2) and caliper, then put gm p/n 18010909 or a similar lubricant into the holes between the bushings. Put the mounting bolt and sleeve assembly in place and tighten the bolt to 51 nm (38 ft. Lbs.) while keeping the bolt boots safe. Join the brake hose to the caliper firmly and tighten the bolt on the hose to 45 nm (33 ft. Lbs.). Check how much space there is between the caliper and the bracket stops; if more space is needed, take out the caliper and use a file to clear out the bracket ends so that there is a total clearance of 0.26 to 0.60 mm (0.010 to 0.024 inch). Calculate the gaps one at a time and sum them up. Pull the brake pedal all the way after you notice it's firm and after that, check the fluid level in the master cylinder. Next, put the tire and wheel onto the car.
Caliper
19331021
Q: How to replace the front brake calipers on Cadillac Escalade?
A:
Start by assessing the brake master cylinder reservoir fluid level; if it stands around the mid-mark no fluid needs to be drained but if fluid is above this mark you must bring the liquid to the halfway point. Lift up the vehicle and take off the wheel and tire setup. Push brake caliper pistons firmly into position using a c-clamp on top of the housing against the back of the outboard pad. Insert a rubber plug over the brake pipe opening at its end to seal fluid while cleaning the brake hose for installation. Take the brake hose to caliper bolt loose and throw away its 2 copper brake hose gaskets since they may be stuck to caliper housing or hose end before detaching the brake hose from caliper. Take off the 2 brake caliper bolts while being careful not to push down on the brake pedal with the open brake system components. Detach the brake caliper from its mount. Position the brake caliper onto its mounting bracket and use 2 mounting bolts to fasten it before tightening to 108 nm (80 ft. Lbs.). Replace the rubber brake hose cap and attach the 2 new copper gaskets under it with the caliper bolt. Tighten the bolt to 40 nm (30 ft. Lbs.) when mounting it on the brake caliper. Drain the hydraulic brake system fluids before restating tire and wheel components down the vehicle then refill the brake tank to its correct fluid mark.