Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 18040100
Caliper, Driver Side

1999-2010 GM

Customer Questions & Expert Answers (22)
GM 18040100 Caliper, Driver Side
  • Part Description
    Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
  • Position
    Driver Side
  • Replaced By
    19331022
  • Manufacturer
    General Motors
Make sure this part fits
$171.88 MSRP: $331.97
You Save: $160.09 (49%)
Core Charge: $40.00
Ships in 1-2 Business Days
1
ADD TO CART
  • 2003 GMC Savana 2500 Caliper, Driver Side Diagram for 18040100
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 18040100

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006 Cadillac EscaladeBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2005 Chevrolet AstroBase, LS, LT6 Cyl 4.3 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2006 Chevrolet Avalanche 2500LS, LT8 Cyl 8.1 L GAS
    2003-2010 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2005 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    1999-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 18040100 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 18040100 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be done to the brake caliper housing and bleeder valve for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Blow out all passages.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How should the brake pad guiding surfaces be prepared for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Clean all residue from the brake pad guiding surfaces on the brake caliper housing and mounting bracket, and clean parts not included in the repair kit with denatured alcohol before drying them with non-lubricated filtered compressed air.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the next step after reinstalling the brake caliper for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Reinstall the quarter shaft shield and secure it with the nut and bolt, tightening them to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you compress the brake caliper pistons for the 2005 Chevrolet Astro? Posted by Customer
    A:
    Use a large C-clamp over the top of the caliper housing against the back of the outboard pad, tightening it until the pistons are fully retracted.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you install the piston and boot for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Lubricate the brake caliper bore and piston with brake fluid, install the boot over the piston with the fold facing the brake caliper housing piston bore opening, seat the boot into the groove, and slide the piston into the bore, pushing it down to the bottom while ensuring proper seating of the boot.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How should the brake caliper be supported during the replacement process for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Support the brake caliper with heavy mechanic's wire or an equivalent whenever it is separated from its mount while the hydraulic flexible brake hose remains connected.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    Where should the service operations be performed for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    On a clean bench, free from mineral oil materials.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How should the brake pad guiding surfaces be cleaned for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Clean all residue from the brake pad guiding surfaces and the parts not included in the repair kit with denatured alcohol, then dry them with filtered unlubricated compressed air.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    Why should you avoid depressing the brake pedal during this process for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    To prevent damage to the brake system.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should you do after securing the brake caliper for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake hose fitting.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the procedure for removing the brake hose for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the brake hose to caliper bolt and then the brake hose from the caliper, ensuring that the copper gaskets are not attached; discard the 2 copper brake hose gaskets and replace them with new ones.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How should the boot be installed over the piston for the 2002 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the boot with the fold facing the brake caliper housing piston bore opening, seating the boot into the groove before sliding the piston into the bore.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the procedure for removing the brake hose for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the brake hose to caliper bolt and discard the 2 copper brake hose gaskets, then detach the brake hose from the caliper.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the first step to replace the front brake caliper for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be done after sliding the piston into the bore for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Push it down to the bottom and ensure the boot seats properly in both the piston groove and the brake caliper bore groove.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should you do before removing the brake caliper for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Clean all dirt and debris from the brake caliper and fittings, and cap or plug the brake hose to prevent fluid leakage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What do you need to install before connecting the brake hose for the 2005 GMC Safari? Posted by Customer
    A:
    Install 2 new copper brake hose gaskets.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What components need to be removed after the piston for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the piston boot, piston seal, brake caliper bleed screw cap, and bleed screw.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the torque specification for tightening the brake caliper bolts for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    42 Nm (31 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the next step after inspecting the fluid level for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the correct way to install the boot over the piston for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Ensure the fold faces the brake caliper housing piston bore opening.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper, Driver Side 18040100 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18040100 Caliper, Driver Side is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18040100 Caliper, Driver Side fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Astro models, as well as GMC Sierra 1500, Sierra 2500 HD, Safari. Additionally, it is compatible with Cadillac Escalade, Escalade ESV and Hummer H2 models.
The original GM component designated by Manufacturer Part Number 18040100 maintains top performance when functioning as the Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper unit at its Driver Side. The component 18040100 is constructed from durable material and its dimensions span 12.8 x 7.2 x 4.0 inches while weighing 11.80 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 18040100 has available replacement options listed under 19331022. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.