Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19331021
Caliper

1999-2013 GM

Customer Questions & Expert Answers (28)
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
GM 19331021 Caliper
  • Part Description
    Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
  • Position
    Rear
  • Replaces
    18040101, 25848000
  • Manufacturer
    General Motors
Make sure this part fits
$170.23 MSRP: $328.77
You Save: $158.54 (49%)
Core Charge: $40.00
Ships in 1-2 Business Days
1
ADD TO CART

  • 19331021 Caliper is Ref No. 7 in the diagram below

    2003 GMC Savana 2500 Caliper Diagram for 19331021
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19331021

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2005 Chevrolet AstroBase, LS, LT6 Cyl 4.3 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2010 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2008 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2008 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19331021 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19331021 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the first step to replace the front brake caliper for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point, remove fluid to reach that point.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the first step to replace the rear brake caliper bracket for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you compress the brake caliper pistons for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Use a large C-clamp over the top of the caliper housing against the back of the outboard pad, tightening it until the pistons are fully pushed into the caliper bores.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How should the new piston seal and brake caliper bore seal groove be lubricated for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Lubricate with brake fluid, ensuring the seal is not twisted.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should you ensure while removing the brake caliper for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Do not depress the brake pedal during this process to avoid damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the torque specification for the brake hose to caliper bolt for the 2005 Chevrolet Astro? Posted by Customer
    A:
    Tighten this bolt to 40 Nm (30 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the first step in servicing and repairing the rear brake caliper (25/35 Series) for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Begin by removing the brake caliper from the vehicle, using a thin piece of wood to protect the pistons while applying compressed air to the brake hose inlet fitting port for piston removal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be done after inspecting the fluid level for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you remove the piston from the brake caliper for the 2005 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the piston by directing compressed air into the brake hose inlet fitting port, followed by the piston boot, piston seal, brake caliper bleed screw cap, and bleed screw.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you install the new caliper for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Install it onto the caliper bracket and secure it with the brake caliper bolts tightened to 108 Nm (80 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the torque specification for tightening the brake caliper mounting bolts for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Tighten the 2 brake caliper mounting bolts to 108 N.m (80 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How can you prevent damage to the piston during removal for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Place a thin piece of wood in front of the piston.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be done after installing the brake caliper bolts for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake hose fitting, install 2 NEW copper brake hose gaskets, and tighten the brake hose to caliper bolt to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the torque specification for tightening the brake hose to caliper bolt for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    40 Nm (30 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you compress the brake caliper pistons for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Use 2 large C-clamps placed over the top of the caliper housing against the back of the outboard brake pad, tightening them until the pistons are fully retracted.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you compress the brake caliper pistons for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Use 2 large C-clamps placed over the top of the caliper housing against the back of the outboard brake pad, tightening them until the pistons are fully retracted.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    How do you install new bushings for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Use a flat-bladed tool to remove and a socket to install new bushings.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be done to prevent fluid loss and contamination for the 2003 GMC Safari? Posted by Customer
    A:
    Clean the brake hose end and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should be done to prevent fluid loss before removing the brake hose for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Clean the brake hose end and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What do you need to install before attaching the brake hose for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Install 2 new copper brake hose gaskets.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the first step to replace the rear brake caliper bracket for the 2004 GMC Yukon? Posted by Customer
    A:
    Support the brake caliper with heavy mechanic's wire or an equivalent tool while it is detached from its mount and the hydraulic flexible brake hose remains connected.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What should you do after installing the new caliper for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake hose fitting.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the first step to ensure safety when overhauling the front brake caliper for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Avoid placing fingers in front of the piston when applying compressed air to prevent serious injury.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the final step in the process for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tire and wheel assembly, remove the safety stands, lower the vehicle, and fill the master cylinder reservoir to the proper level with clean brake fluid.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the initial action to take with the brake caliper for the 2004 GMC Savana 3500? Posted by Customer
    A:
    First, remove the brake caliper from the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the procedure for removing the brake hose for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the brake hose to caliper bolt and then the brake hose from the caliper, ensuring that the copper gaskets are not attached; discard the 2 copper brake hose gaskets and replace them with new ones.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    Q:
    What is the torque specification for the caliper bracket mounting bolts for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Tighten them to 200 Nm (148 ft. lbs.) for vehicles with JC5/JH5 brake systems or 165 Nm (122 ft. lbs.) for those with JH6 systems.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper 19331021 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19331021 Caliper is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19331021 Caliper fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by Manufacturer Part Number 19331021 maintains top performance when functioning as the Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper unit at its Rear. The component 19331021 is constructed from durable material and its dimensions span 7.2 x 4.1 x 12.6 inches while weighing 11.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19331021 has available replacement options 18040101, 25848000. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.