How to replace the front side door hinge on GMC Canyon?

Start the front side Door Hinge replacement process by opening the door first before removing the bolt which holds the front Door Check link to the body. First disconnect the door wiring harness connectors from the body while removing the front door wiring harness grommet. First loosen the bolts everything that secures front Door Hinge keeper straps to their position. Supporting staff should assist in lifting the door from its hinges on the body before resting it securely on a clean protected setup. Use a clean rag to clean the mounting locations of the body side hinges and apply a grease pencil marker or appropriate marker to show the front Door Hinge positions. Take off the bolts that connect body side hinges to their body position before removing the hinges. During installation position the front Door Hinge of the body side first by using reference guides. The body side Door Hinge installation requires users to tighten its bolts to 27 n.m (20 lb ft). The body side hinge straps should be positioned under the front door which installation requires helper assistance before tightening the bolts to 25 n.m (18.4 lb ft). The front door wiring harness gets connected to its connectors and the front door wiring harness grommet is installed onto the body structure. The bolt securing the front Door Check link to the body should be tightened to 25 n.m (18.4 lb ft). The door needs to be examined for proper functionality and correct alignment before the check is completed.

How to replace the rear door hinge on GMC Yukon?

You should start by removing the rear door side components and related panel followed by removing excessive sealer around the original hinge while you scribe its location on the door. Using 100 grit sandpaper or higher, sand the body hinge gently until you locate the four welds that connect it to the door. Punch these welds within their centers because this will help drilling remove more material. Use the center punch to mark the middle points of the four welds on the original hinge base while avoiding any penetration into the door surface. Use a 13 mm (1/2 in) rotabroach hole saw or equivalent to drill only at the punch locations before extracting the hinge with help from a chisel if needed. Weld removal from the door must be complete to achieve proper fitment of the service hinge. After fixing any injuries sustained by door drilling or removal steps, prepare all backing plate mounting areas for perfect plate alignment. The service hinge should be placed inside scribe mark areas while you center punch each drilling point then create a 3 mm (1/8 in) pilot hole at each center punch spot using a drill before drilling a 13 mm (1/2 in) hole at these pilot positions. Refer to GM4901M-D-2000 for recommended solutions before painting the surface while avoiding paint system combinations according to manufacturer guidelines. All exposed metal areas need preparation before applying anti-corrosion primer and full-bodied caulk should be used to form an effective seal across the whole hinge mounting surface. After positioning the hinge with backing plate through the door holes, bolt them in place before torquing them to 25 N.m (20 ft lb). Sealers should be applied followed by necessary refinishing of metal surfaces before installing and aligning all related panels and components.

OEM GMC Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

254 Door Hinges found

View related parts
GMC Hinge Part Number: 20824306
$56.81 MSRP: $84.55
You Save: $27.74 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, End Gate Closing; Door Hinge
- Replaces: 15138694, 97288493, 97288492
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Hinge, Driver Side Part Number: 84785253
$30.43 MSRP: $45.91
You Save: $15.48 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Hinge, Rear Compartment Lid And End Gate
- Position: Driver Side
Fits the following GMC Models:
- Canyon | 2023 | Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Hinge, Passenger Side Part Number: 84708326
$34.46 MSRP: $53.94
You Save: $19.48 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Door Hinge; Hinge, End Gate Closing
- Position: Passenger Side
- Replaces: 84377264
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | Base, Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Hinge, Passenger Side Part Number: 84708323
$34.46 MSRP: $53.94
You Save: $19.48 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Door Hinge; Hinge, End Gate Closing
- Position: Passenger Side
- Replaces: 84626879, 84377267
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, Base, Denali, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Hinge, Passenger Side Part Number: 85658892
$33.02 MSRP: $51.68
You Save: $18.66 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Hinge, Rear Compartment Lid And End Gate
- Position: Passenger Side
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Lower Hinge, Rear Part Number: 52020385
$57.40 MSRP: $82.85
You Save: $25.45 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Rear Side Door Lower Hinge; Door Hinge; Upper Hinge; Hinge, Rear Side Door Upper Hinge
- Position: Rear Lower
Fits the following GMC Models:
- Canyon | 2015-2022 | All Terrain, Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Hinge, Passenger Side Part Number: 84785254
$29.88 MSRP: $45.08
You Save: $15.20 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Hinge, Rear Compartment Lid And End Gate
- Position: Passenger Side
Fits the following GMC Models:
- Canyon | 2023 | Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Hinge, Passenger Side Part Number: 84388730
$13.57 MSRP: $21.24
You Save: $7.67 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Door Hinge; Hinge, End Gate Closing
- Position: Passenger Side
Fits the following GMC Models:
- Sierra 1500 | 2019 | AT4, Base, Denali, Elevation, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Hinge, Driver Side Part Number: 84720395
$34.46 MSRP: $53.94
You Save: $19.48 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Door Hinge; Hinge, End Gate Closing
- Position: Driver Side
- Replaces: 84377263
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | Base, Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Lower Hinge, Passenger Side Part Number: 15981566
$44.86 MSRP: $85.56
You Save: $40.70 (48%)
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Door Hinge
- Position: Passenger Side
Fits the following GMC Models:
- Jimmy | 1995-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- Sonoma | 1994-2004 | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Lower Hinge, Driver Side Part Number: 15981565
$53.97 MSRP: $102.95
You Save: $48.98 (48%)
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Door Hinge
- Position: Driver Side
Fits the following GMC Models:
- Jimmy | 1995-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- Sonoma | 1994-2004 | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Lower Hinge, Passenger Side Part Number: 15981562
$64.70 MSRP: $123.44
You Save: $58.74 (48%)
ADD TO CART
Product Specifications
- Other Name: Hinge, Door Hinge; Hinge Kit, Door Hinge; Door Hinge
- Position: Passenger Side
Fits the following GMC Models:
- Jimmy | 1998-2001 | Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- Sonoma | 2001-2004 | SL, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Lower Hinge, Driver Side Part Number: 12477827
$12.53 MSRP: $130.36
You Save: $117.83 (91%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge; Door Hinge
- Position: Driver Side
Fits the following GMC Models:
- Yukon | 2000-2004 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2000-2004 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 2500 | 2000-2004 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Hinge, Passenger Side Part Number: 20824307
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate (End Gate Side) (1/2 Moon Cup); Door Hinge; Hinge, End Gate Closing
- Position: Passenger Side
- Replaces: 15116304
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Hinge Assembly, Driver Side Part Number: 22879595
$142.65 MSRP: $213.28
You Save: $70.63 (34%)
Product Specifications
- Other Name: Hinge, Door Hinge; Door Hinge
- Position: Driver Side
- Replaces: 20813842, 22799855, 25949916, 25775230
Fits the following GMC Models:
- Sierra 1500 | 2007-2013 | SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
- Sierra 2500 HD | 2007-2013 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007-2013 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Hinge Part Number: 15260499
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, End Gate Closing
Fits the following GMC Models:
- Yukon | 2008-2013 | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Hinge, Passenger Side Part Number: 15025195
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Door Hinge
- Position: Passenger Side
Fits the following GMC Models:
- C1500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K1500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Lower Hinge, Front Passenger Side Part Number: 15981546
Product Specifications
- Other Name: Hinge Kit, Front Side Door Lower (Door Side); Door Hinge; Hinge Kit, Door Hinge
- Position: Front Lower Passenger Side
Fits the following GMC Models:
- Jimmy | 1995-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- Sonoma | 1994-2004 | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Lower Hinge, Passenger Side Part Number: 15741798
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge; Door Hinge
- Position: Passenger Side
- Replaces: 12547514
Fits the following GMC Models:
- C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- Yukon | 1995-2000 | Base, Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Upper Hinge, Passenger Side Part Number: 12477826
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge; Door Hinge
- Position: Passenger Side
Fits the following GMC Models:
- Yukon | 2000-2004 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2000-2004 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 2500 | 2000-2004 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More

| Page 1 of 13 |Next >

1-20 of 254 Results

GMC Door Hinge

Choose OEM Door Hinge, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Door Hinge. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Door Hinge Parts and Q&A

Hinge
20824306
Q: How to replace the front side door hinge on GMC Canyon?
A:
Start the front side Door Hinge replacement process by opening the door first before removing the bolt which holds the front Door Check link to the body. First disconnect the door wiring harness connectors from the body while removing the front door wiring harness grommet. First loosen the bolts everything that secures front Door Hinge keeper straps to their position. Supporting staff should assist in lifting the door from its hinges on the body before resting it securely on a clean protected setup. Use a clean rag to clean the mounting locations of the body side hinges and apply a grease pencil marker or appropriate marker to show the front Door Hinge positions. Take off the bolts that connect body side hinges to their body position before removing the hinges. During installation position the front Door Hinge of the body side first by using reference guides. The body side Door Hinge installation requires users to tighten its bolts to 27 n.m (20 lb ft). The body side hinge straps should be positioned under the front door which installation requires helper assistance before tightening the bolts to 25 n.m (18.4 lb ft). The front door wiring harness gets connected to its connectors and the front door wiring harness grommet is installed onto the body structure. The bolt securing the front Door Check link to the body should be tightened to 25 n.m (18.4 lb ft). The door needs to be examined for proper functionality and correct alignment before the check is completed.
Lower Hinge, Driver Side
12472843
Q: How to replace the rear door hinge on GMC Yukon?
A:
You should start by removing the rear door side components and related panel followed by removing excessive sealer around the original hinge while you scribe its location on the door. Using 100 grit sandpaper or higher, sand the body hinge gently until you locate the four welds that connect it to the door. Punch these welds within their centers because this will help drilling remove more material. Use the center punch to mark the middle points of the four welds on the original hinge base while avoiding any penetration into the door surface. Use a 13 mm (1/2 in) rotabroach hole saw or equivalent to drill only at the punch locations before extracting the hinge with help from a chisel if needed. Weld removal from the door must be complete to achieve proper fitment of the service hinge. After fixing any injuries sustained by door drilling or removal steps, prepare all backing plate mounting areas for perfect plate alignment. The service hinge should be placed inside scribe mark areas while you center punch each drilling point then create a 3 mm (1/8 in) pilot hole at each center punch spot using a drill before drilling a 13 mm (1/2 in) hole at these pilot positions. Refer to GM4901M-D-2000 for recommended solutions before painting the surface while avoiding paint system combinations according to manufacturer guidelines. All exposed metal areas need preparation before applying anti-corrosion primer and full-bodied caulk should be used to form an effective seal across the whole hinge mounting surface. After positioning the hinge with backing plate through the door holes, bolt them in place before torquing them to 25 N.m (20 ft lb). Sealers should be applied followed by necessary refinishing of metal surfaces before installing and aligning all related panels and components.