Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12472843
Lower Hinge, Driver Side

1999-2007 GM

Customer Questions & Expert Answers (16)
GM 12472843 Lower Hinge, Driver Side
GM 12472843 Lower Hinge, Driver Side
GM 12472843 Lower Hinge, Driver Side
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$64.29 MSRP: $92.79
You Save: $28.50 (31%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 12472843 Lower Hinge, Driver Side is Ref No. 15 in the diagram below

    2002 Chevy Suburban 1500 Lower Hinge, Driver Side Diagram for 12472843
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12472843

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12472843 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12472843 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the next step after center punching the weld marks for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Use a 13 mm (1/2 in) rotabroach hole saw to drill through the hinge base at each punch location.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What size pilot hole should be drilled at each center punch location for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    A 3 mm (1/8 in) pilot hole.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What is the final step in the installation process for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the bolts, tightening the hinge to the pillar nuts to 25 N.m (18 lb ft), then clean and prepare all surfaces for refinishing, apply sealers, refinish as needed, and install and align all related panels and components.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What is the next step after removing the hinge for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Clean the pillar surface to ensure a flush fit for the service hinge.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What should be done to the bare metal surfaces for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Clean and prepare all bare metal surfaces, applying approved anti-corrosion primer and a full-bodied caulk to the entire hinge mounting surface for a proper seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What are the final steps after installing the hinge for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Apply the sealers, refinish the metal surfaces as necessary, and reinstall and align all related panels and components.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What should be done to the bare metal surfaces for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Clean and prepare all bare metal surfaces, applying approved anti-corrosion primer and a full-bodied caulk to the entire hinge mounting surface for a proper seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    How should the existing hinge be prepared for removal for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Lightly hand-sand the existing hinge with 100 grit or finer sandpaper to locate the four welds attaching the hinge to the door, and punch the center of each weld.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What is the next step after positioning the stud for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Tighten the stud through the pillar using the supplied nuts and repeat for the remaining stud locations.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What tool is used to drill through the hinge for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    A 13 mm (1/2 in) rotabroach hole saw.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What are the initial steps for bodyside hinge replacement for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Follow the same initial steps of removing panels and components, eliminating excess sealer, and marking the hinge location.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    How do you remove the hinge for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the hinge, using a chisel if necessary, and clear all remaining weld from the door surface for a flush fit of the service hinge.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What size pilot hole should be drilled at each center punch location for the 2004 GMC Yukon? Posted by Customer
    A:
    A 3 mm (1/8 in) pilot hole.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What are the final steps after installing the hinge for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Clean and prepare all necessary surfaces for refinishing, apply sealers, refinish as needed, and install and align all related panels and components.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    Q:
    What should be done to the bare metal surfaces before installation for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Clean and prepare all bare metal surfaces, and apply approved anti-corrosion primer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Hinge, Driver Side 12472843 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12472843 Lower Hinge, Driver Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12472843 Lower Hinge, Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 12472843 maintains top performance when functioning as the Hinge Kit, Door Hinge unit at its Driver Side. The component 12472843 is constructed from durable material and its dimensions span 7.0 x 4.3 x 4.3 inches while weighing 1.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Upper Hinge; Hinge; Door Hinge. The part 12472843 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.