How to replace the front side door hinge on the body side on Chevrolet Colorado?

The front side Door Hinge replacement process starts with opening the door while removing the bolt securing the front Door Check link to the body. Remove the grommet holding the front door wiring harness inside the body while disconnecting its connectors. Destroy the bolts which maintain the front Door Hinge keeper straps. Aided by another person raise the front door from its body side hinges before placing it onto a sanitized protection area. Mark the positions of the front door hinges on the body using a grease pencil along with an appropriate marker after cleaning the body mounting area with a dry cloth. The body side hinges need their bolts fully removed before the worker can detach them from the body structure. Position the body side front Door Hinge onto the alignment marks before fastening bolts that support the Door Hinge to the body while tightening them to 27 nm (20 lb ft). Assistance while lowering the front door enables installation of the bolts to secure front Door Hinge keeper straps at a torque of 25 nm (18.4 lb ft). Page 191 directs users to join the front door wire harnesses and mount the grommet to the body structure. The procedure ends with bolt installation of the front Door Check link to the body which requires a torque setting of 25 nm (18.4 lb ft). After completing secure the door for correct operation and alignment inspection.

How to replace the front door hinge on Chevrolet S10?

The process to replace front door hinges requires removal of the door and water deflector alongside the speaker accessory followed by removing extra body sealer from around the hinges. Users should first mark the positions of original hinges onto both surfaces before disconnecting the door hinges from body and Door Hinge pillars. Puncture the center of original hinge welds with a center punch before drilling initial 3mm (1/8-inch) pilot holes which should be followed by 13mm (1/2-inch) deep drilling. Remove the instrument panel and fender bolt and body hinge pillar trim panel and parking Brake Pedal assembly and door opening Weather Strip from the path of the repair before you separate the hinge from its points on both the door and body hinge pillar using a chisel. The surfaces should receive a smooth filing that removes burrs before hinge painting and medium-bodied sealer application. Set the newly installed door hinges along the Door Hinge pillar and body hinge pillar while keeping them inside the scribe marks from before. Fasten the hinges with bolts and tapped anchor plates while aligning them through the holes in the door or hinge pillar segments before securing the bolts to 35 n.m (26 lb ft). The installation order includes the fender bolt followed by the instrument panel and the body hinge pillar trim panel and finally the parking Brake Pedal assembly with the door opening Weather Strip and speaker if necessary along with the water deflector until you reach the door.

OEM Chevrolet Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

502 Door Hinges found

View related parts
Chevrolet Hinge, Driver Side Part Number: 15116303
$50.59 MSRP: $79.18
You Save: $28.59 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, End Gate Closing; Door Hinge
- Position: Driver Side
Fits the following Chevrolet Models:
- Colorado | 2004-2012 | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Lower Hinge, Front Upper Part Number: 15929358
$15.07 MSRP: $21.75
You Save: $6.68 (31%)
ADD TO CART
Product Specifications
- Other Name: Hinge, Front Door Upper Hinge; Door Hinge; Upper Hinge; Hinge, Front Door Lower Hinge
- Position: Front Upper
- Replaces: 22723976
Fits the following Chevrolet Models:
- Malibu | 2004-2012 | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Lower Hinge, Front Driver Side Part Number: 15981549
$89.50 MSRP: $128.06
You Save: $38.56 (31%)
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Front Side Door Lower (Body Side); Door Hinge; Hinge Kit, Door Hinge
- Position: Front Lower Driver Side
Fits the following Chevrolet Models:
- Blazer | 2002-2005 | Base, LS, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Lower Hinge, Front Upper Part Number: 13576849
$14.02 MSRP: $20.87
You Save: $6.85 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Front Side Door Upper; Door Hinge; Upper Hinge; Hinge, Front Door Lower Hinge; Hinge, Front Door Upper Hinge
- Position: Front Upper
Fits the following Chevrolet Models:
- Impala | 2014-2020 | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Upper Hinge, Front Lower Part Number: 13576848
$62.52 MSRP: $90.23
You Save: $27.71 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Front Door Lower Hinge; Door Hinge; Lower Hinge; Hinge, Front Door Upper Hinge
- Position: Front Lower
Fits the following Chevrolet Models:
- Impala | 2014-2020 | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Hinge, Passenger Side Part Number: 84785254
$29.88 MSRP: $45.08
You Save: $15.20 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Hinge, Rear Compartment Lid And End Gate
- Position: Passenger Side
Fits the following Chevrolet Models:
- Colorado | 2023 | LT, Trail Boss, WT, Z71 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Hinge, Driver Side Part Number: 84785255
$22.52 MSRP: $33.97
You Save: $11.45 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Hinge, Rear Compartment Lid And End Gate
- Position: Driver Side
Fits the following Chevrolet Models:
- Colorado | 2023 | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Hinge, Driver Side Part Number: 86778158
$82.35 MSRP: $128.89
You Save: $46.54 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate Closure Side; Hinge, End Gate Closing
- Position: Driver Side
- Replaces: 84714739
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2022-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2021-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Lower Hinge, Passenger Side Part Number: 15981566
$44.86 MSRP: $85.56
You Save: $40.70 (48%)
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Door Hinge
- Position: Passenger Side
Fits the following Chevrolet Models:
- Blazer | 1995-2005 | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- S10 | 1994-2004 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Lower Hinge, Driver Side Part Number: 15981565
$53.97 MSRP: $102.95
You Save: $48.98 (48%)
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Door Hinge
- Position: Driver Side
Fits the following Chevrolet Models:
- Blazer | 1995-2005 | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
- S10 | 1994-2004 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Hinge, Passenger Side Part Number: 20824307
Product Specifications
- Other Name: Hinge Assembly-Pick Up Box End Gate (End Gate Side) (1/2 Moon Cup); Door Hinge; Hinge, End Gate Closing
- Position: Passenger Side
- Replaces: 15116304
Fits the following Chevrolet Models:
- Colorado | 2004-2012 | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Glass Hinge, Rear Driver Side Part Number: 10124263
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate; Hinge
- Position: Rear Driver Side
Fits the following Chevrolet Models:
- Caprice | 1991-1996 | Base, Classic | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Hinge Strap, Passenger Side Part Number: 12392852
Product Specifications
- Other Name: Hinge; Door Hinge; Upper Hinge; Hinge Strap Anchor Plate; Hinge Kit, Rear Side Door Upper Hinge; Hinge, Rear Side Door Upper Hinge
- Position: Passenger Side
Fits the following Chevrolet Models:
- Cavalier | 1984-1994 | Base, CL, CS, RS, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Hinge, Front Upper Passenger Side Part Number: 16625902
Product Specifications
- Other Name: Hinge Assembly-Front Side Door Upper; Door Hinge; Hinge, Front Door Upper Hinge
- Position: Front Upper Passenger Side
Fits the following Chevrolet Models:
- Caprice | 1991-1996 | Base, Classic, Classic LS, Classic LTZ | 6 Cyl 4.3 L GAS, 8 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Impala | 1994-1996 | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Lower Hinge, Passenger Side Part Number: 15981550
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Door Hinge
- Position: Passenger Side
Fits the following Chevrolet Models:
- Blazer | 2002-2005 | Base, LS, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Hinge, Driver Side Part Number: 14046218
Product Specifications
- Other Name: Hinge, End Gate Closing
- Position: Driver Side
Fits the following Chevrolet Models:
- S10 Blazer | 1984-1991 | Base, High Country, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Hinge, Passenger Side Part Number: 14046217
Product Specifications
- Other Name: Hinge, End Gate Closing
- Position: Passenger Side
Fits the following Chevrolet Models:
- S10 Blazer | 1984-1991 | Base, High Country, Sport, Tahoe, Tahoe LT | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Hinge Part Number: 15260499
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, End Gate Closing
Fits the following Chevrolet Models:
- Tahoe | 2008-2013 | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Hinge Strap, Rear Lower Passenger Side Part Number: 12392854
Product Specifications
- Other Name: Hinge Kit, Rear Side Door Lower Hinge; Door Hinge; Lower Hinge; Hinge Strap Anchor Plate; Hinge Kit, Rear Side Door Upper Hinge; Hinge, Rear Side Door Lower Hinge
- Position: Rear Lower Passenger Side
Fits the following Chevrolet Models:
- Cavalier | 1984-1994 | Base, CL, CS, RS, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Upper Hinge, Rear Driver Side Part Number: 16633459
Product Specifications
- Other Name: Hinge, Rear Side Door Upper Hinge; Door Hinge; Hinge
- Position: Rear Upper Driver Side
- Replaces: 16632257
Fits the following Chevrolet Models:
- Cavalier | 1995-2005 | Base, LS, LS Sport, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS

| Page 1 of 26 |Next >

1-20 of 502 Results

Chevrolet Door Hinge

Choose OEM Door Hinge, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Door Hinge. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Door Hinge ensures that all doors remain straight, swing straight and stay locked on each drive. Chevrolet constructs automobiles that are looked at in terms of practicality, daring style and dependable performance that can be traced back to over 100 years of road time. Through sedans, trucks, and SUVs, Chevrolet is able to strike the balance between cost and long-term construction. Chevy continues to perfect the engines to make commutes quick but at the same time economical. Chevy is also driving driver tech, more recently with the addition of Super Cruise in case long highways need less effort. Family outings get spacious cabins and intelligent storing whereas individual runs have a taste of crispness. Road-trip customers enjoy a broad range of models, including small-city hatches to the rough-and-tough pickup truck each with its own set of tuned parameters of torque, fuel use, and simple maintenance. The brand pays attention to drivers who desire fun when they do not need it and reacts to it with trustworthy machines that do their job. The Door Hinge is made in hard steel and frequently coated with zinc, as it is riveted to the chassis, establishing the pivot point, the latch fitting exactly every time, even when thousands of slams have taken place, as the hardened pins and brass bushings struggle much longer than the ancient rolled joints. A Door Hinge begins to sag and you can see the misalignment quickly hence the replacement of pins or bushings will re-establish that solid click and will keep the weather out. Chevy owners love knowing that the hinge is resistant to rust and it also fits with new check straps that do not over-open without huge add-ons.

Chevrolet Door Hinge Parts and Q&A

Hinge, Driver Side
15116303
Q: How to replace the front side door hinge on the body side on Chevrolet Colorado?
A:
The front side Door Hinge replacement process starts with opening the door while removing the bolt securing the front Door Check link to the body. Remove the grommet holding the front door wiring harness inside the body while disconnecting its connectors. Destroy the bolts which maintain the front Door Hinge keeper straps. Aided by another person raise the front door from its body side hinges before placing it onto a sanitized protection area. Mark the positions of the front door hinges on the body using a grease pencil along with an appropriate marker after cleaning the body mounting area with a dry cloth. The body side hinges need their bolts fully removed before the worker can detach them from the body structure. Position the body side front Door Hinge onto the alignment marks before fastening bolts that support the Door Hinge to the body while tightening them to 27 nm (20 lb ft). Assistance while lowering the front door enables installation of the bolts to secure front Door Hinge keeper straps at a torque of 25 nm (18.4 lb ft). Page 191 directs users to join the front door wire harnesses and mount the grommet to the body structure. The procedure ends with bolt installation of the front Door Check link to the body which requires a torque setting of 25 nm (18.4 lb ft). After completing secure the door for correct operation and alignment inspection.
Hinge, Driver Side
15660003
Q: How to replace the front door hinge on Chevrolet S10?
A:
The process to replace front door hinges requires removal of the door and water deflector alongside the speaker accessory followed by removing extra body sealer from around the hinges. Users should first mark the positions of original hinges onto both surfaces before disconnecting the door hinges from body and Door Hinge pillars. Puncture the center of original hinge welds with a center punch before drilling initial 3mm (1/8-inch) pilot holes which should be followed by 13mm (1/2-inch) deep drilling. Remove the instrument panel and fender bolt and body hinge pillar trim panel and parking Brake Pedal assembly and door opening Weather Strip from the path of the repair before you separate the hinge from its points on both the door and body hinge pillar using a chisel. The surfaces should receive a smooth filing that removes burrs before hinge painting and medium-bodied sealer application. Set the newly installed door hinges along the Door Hinge pillar and body hinge pillar while keeping them inside the scribe marks from before. Fasten the hinges with bolts and tapped anchor plates while aligning them through the holes in the door or hinge pillar segments before securing the bolts to 35 n.m (26 lb ft). The installation order includes the fender bolt followed by the instrument panel and the body hinge pillar trim panel and finally the parking Brake Pedal assembly with the door opening Weather Strip and speaker if necessary along with the water deflector until you reach the door.