How to replace the rear axle shaft on GMC Yukon?

To replace the rear Axle Shaft, first, lift the vehicle. Take off the tire and wheel assembly, take off the brake caliper as well as the rear Wheel Speed Sensor. Next, remove the rear axle housing cover and gasket and the pinion shaft locking bolt. On axles non-locking take off the pinion shaft; for those with a locking Differential, partially back off the pinion shaft and turn the case to allow the pinion shaft to contact the housing. With the help of a screw driver or any other similar device, turn the c-lock until it is in line with the thrust block and push on the flange of the Axle Shaft towards the Differential then pull out the c-lock from the button end of the Axle Shaft. Important: make sure that you do not rotate the Axle Shaft during the process of removal so as to prevent misaligning the gears. If the axle is stubborn to be removed, use the j 45859 (Axle Remover) and j 2619-01 (Slide Hammer). During installation, ensure that when you install the Axle Shaft into the rear axle housing, the spline on the shaft locks into the right side gear on the Differential end. For axles without locking Differential install your c-lock against the button end of Axle Shaft. For those with locking Differential, tap pinion shaft in halfway and install a c lock on Axle Shaft to let ends be flush with thrust block . Pull the shaft flange out to set the seat of the c-lock, in the Differential gear and align the hole of pinion shaft, with a hole of bolt in the case of Differential. And then, install six new pinion shaft bolt; tighten to 36n.m (27 lb ft) for the 8.6 inch axle, and to 50 n.m (37 lb ft) for the 9.5 ld inch axle. Replace the rear axle covering and gasket as well as the brake caliper, the rear Wheel Speed Sensor, and the tire and wheel assembly. Finally, fill the rear axle with the required type of axle lubricant and withdraw the vehicle.

How to replace the rear axle shaft and gasket on GMC Sierra 1500?

Late-stage repairs start with removing the bolts from both the flange assembly. Use a soft-faced hammer to lightly tap the Axle Shaft before you grab the flange's rib with locking pliers for twisting removal. Start by pulling the Axle Shaft through the tube before you remove its gasket then clean both the Axle Shaft flange and the exterior of the hub assembly. To install the axle components place the gasket onto the shaft and position both parts into the tube allowing proper engagement of splines with differential side gears while aligning hub and axle holes. Use the specified torque measurements to tighten the axle flange bolts at 156 n.m (115 lb ft) when using the 10.5 inch axle while using 185 n.m (136 lb ft) for the 11.5 inch axle assembly. To finish the procedure you must check the axle housing for sufficient lubricant and replenish as needed according to the axle size specifications.

OEM GMC Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

590 Axle Shafts found

View related parts
GMC Axle Assembly, Front Driver Side Part Number: 84212542
$222.70 MSRP: $353.59
You Save: $130.89 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; CV Axle Assembly; Axle Shaft; CV Axle; Axle; Shaft, Front Wheel Drive Axle
- Position: Front Driver Side
- Replaces: 23291775
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
GMC Axle Shafts, Rear Driver Side Part Number: 85150637
$144.08 MSRP: $228.75
You Save: $84.67 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; Axle Shaft; Axle Assembly; Shaft, Rear Axle Drive
- Position: Rear Driver Side
- Replaced by: 86508786
Fits the following GMC Models:
- Acadia | 2017-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Axle Assembly, Front Passenger Side Part Number: 84814086
$464.02 MSRP: $790.00
You Save: $325.98 (42%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive; Axle Shaft; Shaft, Front Wheel Drive Axle
- Position: Front Passenger Side
- Replaced by: 85535776
Fits the following GMC Models:
- Acadia | 2017-2019 | Denali, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Axle Shaft, Rear Passenger Side Part Number: 84937152
$134.04 MSRP: $212.82
You Save: $78.78 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Rear Axle; Axle Shafts; Shaft, Rear Axle Drive
- Position: Rear Passenger Side
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Differential Assembly, Front Center Part Number: 25792317
$1411.89 MSRP: $2231.53
You Save: $819.64 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle, Front Axle And Axle Center; Differential
- Position: Front Center
Fits the following GMC Models:
- Canyon | 2007-2008 | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Intermediate Shaft, Front Part Number: 84937888
$45.61 MSRP: $72.42
You Save: $26.81 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Front Axle; Shaft, Front Wheel Drive Axle
- Position: Front
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Axle Assembly, Front Part Number: 84521702
$161.11 MSRP: $255.80
You Save: $94.69 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; Shaft, Front Wheel Drive Axle
- Position: Front
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Axle Assembly, Front Passenger Side Part Number: 85103941
$130.67 MSRP: $222.45
You Save: $91.78 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; Axle Shaft; Axle; Shaft, Front Wheel Drive Axle
- Position: Front Passenger Side
- Replaces: 84112017, 84645996, 84796309, 85103944, 84170692, 84645994, 84796310, 84615518
Fits the following GMC Models:
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS
View related parts
GMC Axle Shaft, Rear Driver Side Part Number: 84937151
$127.64 MSRP: $210.27
You Save: $82.63 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Rear Axle; Shaft, Rear Axle Drive
- Position: Rear Driver Side
Fits the following GMC Models:
- Canyon | 2023 | AT4 | 4 Cyl 2.7 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 23492802
$2704.23 MSRP: $3480.34
You Save: $776.11 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle Shaft; Axle, Rear Axle
- Position: Rear
- Replaces: 23206159
Fits the following GMC Models:
- Sierra 1500 | 2015-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 22958792
$3555.36 MSRP: $4575.76
You Save: $1020.40 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle Shaft; Axle, Rear Axle
- Position: Rear
Fits the following GMC Models:
- Sierra 3500 HD | 2015-2018 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Axle Assembly, Rear Part Number: 87821646
$3284.05 MSRP: $4227.83
You Save: $943.78 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle, Rear Axle
- Position: Rear
Fits the following GMC Models:
- Sierra 1500 | 2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 23492798
$2704.23 MSRP: $3480.34
You Save: $776.11 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle Shaft; Axle, Rear Axle
- Position: Rear
- Replaces: 23162383, 23206155
Fits the following GMC Models:
- Sierra 1500 | 2015-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 22810683
$2983.15 MSRP: $3839.32
You Save: $856.17 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle Shaft; Axle, Rear Axle
- Position: Rear
- Replaces: 22752001, 20977789
Fits the following GMC Models:
- Sierra 3500 HD | 2012-2014 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Axle Assembly, Rear Part Number: 84692717
$5455.88 MSRP: $7023.84
You Save: $1567.96 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Differential; Axle Shaft; Axle; Axle, Rear Axle
- Position: Rear
Fits the following GMC Models:
- Sierra 3500 HD | 2020-2022 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 87821649
$2446.68 MSRP: $3148.89
You Save: $702.21 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear
- Position: Rear
- Replaces: 85555145
Fits the following GMC Models:
- Sierra 1500 | 2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 84258421
$3787.66 MSRP: $4874.73
You Save: $1087.07 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle Shaft; Axle, Rear Axle
- Position: Rear
- Replaces: 84083620, 23337023, 23405767, 22958774, 84051232
Fits the following GMC Models:
- Sierra 2500 HD | 2015-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 84447462
$3284.05 MSRP: $4227.83
You Save: $943.78 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle Shaft; Axle; Axle, Rear Axle
- Position: Rear
Fits the following GMC Models:
- Sierra 1500 | 2019-2021 | AT4, Base, Denali, Elevation, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 22958777
$3555.36 MSRP: $4575.76
You Save: $1020.40 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle Shaft; Axle, Rear Axle
- Position: Rear
- Replaces: 22871884
Fits the following GMC Models:
- Sierra 2500 HD | 2015-2018 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Axle Assembly, Rear Part Number: 22874942
$2269.00 MSRP: $2920.20
You Save: $651.20 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear; Axle Shaft; Axle, Rear Axle
- Position: Rear
- Replaces: 20937831
Fits the following GMC Models:
- Sierra 1500 | 2010-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX

| Page 1 of 30 |Next >

1-20 of 590 Results

GMC Axle Shaft

Choose OEM Axle Shaft, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Axle Shaft. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Axle Shaft Parts and Q&A

Axle Shaft, Rear
22874951
Q: How to replace the rear axle shaft on GMC Yukon?
A:
To replace the rear Axle Shaft, first, lift the vehicle. Take off the tire and wheel assembly, take off the brake caliper as well as the rear Wheel Speed Sensor. Next, remove the rear axle housing cover and gasket and the pinion shaft locking bolt. On axles non-locking take off the pinion shaft; for those with a locking Differential, partially back off the pinion shaft and turn the case to allow the pinion shaft to contact the housing. With the help of a screw driver or any other similar device, turn the c-lock until it is in line with the thrust block and push on the flange of the Axle Shaft towards the Differential then pull out the c-lock from the button end of the Axle Shaft. Important: make sure that you do not rotate the Axle Shaft during the process of removal so as to prevent misaligning the gears. If the axle is stubborn to be removed, use the j 45859 (Axle Remover) and j 2619-01 (Slide Hammer). During installation, ensure that when you install the Axle Shaft into the rear axle housing, the spline on the shaft locks into the right side gear on the Differential end. For axles without locking Differential install your c-lock against the button end of Axle Shaft. For those with locking Differential, tap pinion shaft in halfway and install a c lock on Axle Shaft to let ends be flush with thrust block . Pull the shaft flange out to set the seat of the c-lock, in the Differential gear and align the hole of pinion shaft, with a hole of bolt in the case of Differential. And then, install six new pinion shaft bolt; tighten to 36n.m (27 lb ft) for the 8.6 inch axle, and to 50 n.m (37 lb ft) for the 9.5 ld inch axle. Replace the rear axle covering and gasket as well as the brake caliper, the rear Wheel Speed Sensor, and the tire and wheel assembly. Finally, fill the rear axle with the required type of axle lubricant and withdraw the vehicle.
Companion Flange
88967027
Q: How to replace the rear axle shaft and gasket on GMC Sierra 1500?
A:
Late-stage repairs start with removing the bolts from both the flange assembly. Use a soft-faced hammer to lightly tap the Axle Shaft before you grab the flange's rib with locking pliers for twisting removal. Start by pulling the Axle Shaft through the tube before you remove its gasket then clean both the Axle Shaft flange and the exterior of the hub assembly. To install the axle components place the gasket onto the shaft and position both parts into the tube allowing proper engagement of splines with differential side gears while aligning hub and axle holes. Use the specified torque measurements to tighten the axle flange bolts at 156 n.m (115 lb ft) when using the 10.5 inch axle while using 185 n.m (136 lb ft) for the 11.5 inch axle assembly. To finish the procedure you must check the axle housing for sufficient lubricant and replenish as needed according to the axle size specifications.