Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19121909
Pinion Shaft, Front Passenger Side

1988-2019 GM

Customer Questions & Expert Answers (20)
GM 19121909 Pinion Shaft, Front Passenger Side
GM 19121909 Pinion Shaft, Front Passenger Side
GM 19121909 Pinion Shaft, Front Passenger Side
GM 19121909 Pinion Shaft, Front Passenger Side
  • Part Description
    Shaft, Front Axle; Axle Shaft
  • Position
    Front Passenger Side
  • Replaces
    15521907
  • Manufacturer
    General Motors
Make sure this part fits
$144.68 MSRP: $353.04
You Save: $208.36 (60%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 19121909 Pinion Shaft, Front Passenger Side is Ref No. 16 in the diagram below

    1998 GMC Yukon Pinion Shaft, Front Passenger Side Diagram for 19121909
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19121909

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1992-1994 Chevrolet BlazerBase, Cheyenne, Silverado, Silverado Sport8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1992-1994 Chevrolet C1500454 SS, Base, Cheyenne, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    2000, 1992-1994 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19121909 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19121909 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be done after aligning the holes for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the axle flange bolts, tightening them to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft and gasket for the 2003 Cadillac Escalade? Posted by Customer
    A:
    First, raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done with the wheel drive shaft splined shank during installation for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Insert the wheel drive shaft splined shank into the knuckle hub.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft or gasket for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the first step in the process for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the wheel and tire assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the procedure for axles with a locking differential for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    For those with a locking differential, withdraw the shaft partially and rotate the case until the pinion shaft touches the housing. Use a screwdriver or similar tool to rotate the lock until it aligns with the thrust block.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be removed after the rear steering gear assembly for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the steering knuckle assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be removed after pressing the wheel drive shaft from the hub for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the six bolts securing the wheel drive shaft inboard flange to the output shaft flange.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the next step after gripping the axle shaft flange for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Twist to begin the removal and then take out the axle shaft from the tube.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done for axles without a locking differential during installation for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Place the lock on the button end of the axle shaft.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the torque specification for the 11.5 inch axle bolts for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Tighten them to 185 Nm (136 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you create clearance for the C-lock for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential, and if necessary, tap it with a soft-faced mallet.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be removed after the tire and wheel assembly for the 2000 GMC C3500? Posted by Customer
    A:
    Remove the brake caliper, followed by the rear cover and gasket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done for axles without a locking differential during installation for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Place the lock on the button end of the axle shaft.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you remove the lock clip from the axle shaft end for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    The lock clip is spring loaded and fits securely in the axle shaft slot; it may require a screwdriver or related tool to push it off, and pushing the axle shaft inwards towards the gears can assist in this process.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the torque specification for the 10.5 inch axle bolts for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Tighten the bolts to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you align the lock for the locking differential for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use a screwdriver or similar tool to rotate the lock until it aligns with the thrust block.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after aligning the holes for the 2005 GMC Yukon? Posted by Customer
    A:
    Install the axle flange bolts, tightening them to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you create clearance for the C-lock for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential, and if necessary, tap it with a soft-faced mallet.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pinion Shaft, Front Passenger Side 19121909 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19121909 Pinion Shaft, Front Passenger Side is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19121909 Pinion Shaft, Front Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 19121909 maintains top performance when functioning as the Shaft, Front Axle; Axle Shaft unit at its Front Passenger Side. The component 19121909 is constructed from durable material and its dimensions span 8.9 x 4.0 x 3.7 inches while weighing 3.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inner Shaft; Shaft. The part 19121909 has available replacement options 15521907. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.