How to replace the front sway bar bushing on a 4WD on Chevrolet S10?

The procedure of sway bar bushing replacement for a 4WD vehicle begins by lifting and appropriately supporting the vehicle. The first step requires removal of the steering linkage shield then the sequence continues with sway bar bracket mounting bolt extraction followed by removal of the sway bar bracket. You must remove the sway bar bushing next in this process. The installation requires aligning the new sway bar bushing with the sway bar while keeping its slit oriented towards the front position. Afterward you can place the sway bar bracket over this alignment. Reinstall the steering linkage shield afterward you install the sway bar bracket mounting bolts which should be tight at 65 Nm (48 ft. lbs.) torque before lifting the vehicle down.

How to replace the front sway bar bushing on Chevrolet Tahoe?

The Sway Bar Bushing replacement process begins with lifting the vehicle and supporting it after tire and wheel assembly removal. Begin by taking off any oil pan skid plate that is present then unfasten the Sway Bar Bushing bracket bolts before proceeding with removing the sway bar bracket. After lowering the sway bar users can access sway bar bushings for removal. Users must inspect every part for wear while searching for damage. Install the bushings on the sway bar first while orienting their slits toward the vehicle front before placing the sway bar brackets over them. Screw in the Sway Bar Bushing bracket bolts and apply torque of 33 nm (24 ft. Lbs.) on 1 5 series models and 50 nm (39 ft. Lbs.) on 25/35 series models. You must install sway bar links prior to the oil pan skid plate if present according to torque specifications of 20 nm (15 ft. Lbs.). Lower the vehicle after removing safety stands and then reassemble the tire along with wheel assembly.

OEM Chevrolet Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

202 Sway Bar Bushings found

View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 23305977
$11.56 MSRP: $21.71
You Save: $10.15 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Front
Fits the following Chevrolet Models:
- Corvette | 2016-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Bushings Part Number: 23413426
$6.23 MSRP: $11.69
You Save: $5.46 (47%)
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing
- Position: Front
Fits the following Chevrolet Models:
- Corvette | 2017-2019 | Grand Sport, Stingray, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Stabilizer Bar Insulator Part Number: 10387838
$11.83 MSRP: $21.11
You Save: $9.28 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Front
Fits the following Chevrolet Models:
- Corvette | 2005-2013 | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 23305978
$11.44 MSRP: $21.47
You Save: $10.03 (47%)
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Front
- Replaces: 22950841
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 10351313
$9.37 MSRP: $16.76
You Save: $7.39 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Position: Rear
Fits the following Chevrolet Models:
- Impala | 2006-2013 | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
- Impala Limited | 2014-2016 | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX
- Monte Carlo | 2004-2007 | LS, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 15639063
$12.03 MSRP: $21.79
You Save: $9.76 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushing
- Position: Rear
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2011-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Silverado 3500 | 2001-2006 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Silverado 3500 Classic | 2007 | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Silverado 3500 HD | 2011-2023, 2007 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View More
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 20902784
$9.30 MSRP: $17.47
You Save: $8.17 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Front
- Replaces: 15275279
Fits the following Chevrolet Models:
- HHR | 2006-2011 | LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 25918986
$18.31 MSRP: $34.38
You Save: $16.07 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Bushings
- Position: Front
Fits the following Chevrolet Models:
- Equinox | 2010-2017 | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 23305975
$6.51 MSRP: $12.23
You Save: $5.72 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Rear
- Replaces: 23289931
Fits the following Chevrolet Models:
- Corvette | 2015-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing, Blue Part Number: 23305974
$7.17 MSRP: $13.47
You Save: $6.30 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Rear
- Replaces: 22950837
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing, Green Part Number: 23305976
$12.60
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Rear
- Replaces: 22950835
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Stabilizer Link Insulator Part Number: 14084098
$16.88 MSRP: $66.26
You Save: $49.38 (75%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft
- Position: Front
Fits the following Chevrolet Models:
- Corvette | 1984-1987 | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 86782047
$11.26 MSRP: $21.14
You Save: $9.88 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Bushings
Fits the following Chevrolet Models:
- Colorado | 2023 | ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 84453009
$8.72 MSRP: $15.58
You Save: $6.86 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Front
- Replaced by: 87869251
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Stabilizer Bar Insulator Part Number: 15241135
$8.23 MSRP: $14.70
You Save: $6.47 (45%)
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing
- Position: Rear
Fits the following Chevrolet Models:
- Corvette | 2005-2009 | 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Stabilizer Bar Insulator Part Number: 22784720
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing
- Position: Rear
- Replaces: 25796972
Fits the following Chevrolet Models:
- Corvette | 2009-2013 | 427, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Stabilizer Bar Insulator Part Number: 10436136
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing
- Position: Rear
Fits the following Chevrolet Models:
- Corvette | 2005-2013 | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing, Rear Part Number: 10333410
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Sway Bar Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
- Replaces: 10424744, 10431951
Fits the following Chevrolet Models:
- Corvette | 2000-2004 | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 10098138
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing
- Position: Front
Fits the following Chevrolet Models:
- Corvette | 1988-1996 | 35th Anniversary Edition, 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Stabilizer Bar Bushing Part Number: 10098137
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing
- Position: Front
Fits the following Chevrolet Models:
- Corvette | 1988-1995 | 35th Anniversary Edition, 40th Anniversary Edition, Base, ZR-1 | 8 Cyl 5.7 L GAS

| Page 1 of 11 |Next >

1-20 of 202 Results

Chevrolet Sway Bar Bushing

Choose OEM Sway Bar Bushing, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Sway Bar Bushing. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Sway Bar Bushing holds the bar firmly in place to ensure a flat ride around the turns. Ever since 1911, Chevrolet has rolled out vehicles that are low-cost, high power, and daily driving. The reason why people love them is that the controls are sensible, the cabins shake off road dirt and the engines are taken to extremes without spectacle. Chevy is also continuing to add new toys: small blocks which burn less fuel, touch screens which react quickly, and the Super Cruise system which lets the wheel take charge of the traffic jams as you remain alert. Families are able to get into a spacious SUV when they need to take their children to school, users can get into a hatchback that is fast, and work teams rely on robust trucks that can transport heavy loads. Chevy is following a simple philosophy: it makes something that you can afford to leave outside when cold, deal with hot asphalt, and still makes it look nice. When the chassis is hard-leaned, Sway Bar Bushing is applied to squeeze the sway bar firmly against its bracketing and apply upward pressure to the other wheel. When a Sway Bar Bushing cracks or oozes out, the bar rattles, steering becomes vague, and potholes become like body hits. Drivers of Chevy cars detect the clue at the first stage: the muffled bumps on the speeding, greater roll, tires crying out at earlier speeds. Change the part before you press the button till it crashes, and the ride will be brought back to ground without spending a lot of cash or wasting time. When the bar is solid, the truck, coupe, or crossover is predictable.

Chevrolet Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing
15010349
Q: How to replace the front sway bar bushing on a 4WD on Chevrolet S10?
A:
The procedure of sway bar bushing replacement for a 4WD vehicle begins by lifting and appropriately supporting the vehicle. The first step requires removal of the steering linkage shield then the sequence continues with sway bar bracket mounting bolt extraction followed by removal of the sway bar bracket. You must remove the sway bar bushing next in this process. The installation requires aligning the new sway bar bushing with the sway bar while keeping its slit oriented towards the front position. Afterward you can place the sway bar bracket over this alignment. Reinstall the steering linkage shield afterward you install the sway bar bracket mounting bolts which should be tight at 65 Nm (48 ft. lbs.) torque before lifting the vehicle down.
Stabilizer Bar Bushing
14062929
Q: How to replace the front sway bar bushing on Chevrolet Tahoe?
A:
The Sway Bar Bushing replacement process begins with lifting the vehicle and supporting it after tire and wheel assembly removal. Begin by taking off any oil pan skid plate that is present then unfasten the Sway Bar Bushing bracket bolts before proceeding with removing the sway bar bracket. After lowering the sway bar users can access sway bar bushings for removal. Users must inspect every part for wear while searching for damage. Install the bushings on the sway bar first while orienting their slits toward the vehicle front before placing the sway bar brackets over them. Screw in the Sway Bar Bushing bracket bolts and apply torque of 33 nm (24 ft. Lbs.) on 1 5 series models and 50 nm (39 ft. Lbs.) on 25/35 series models. You must install sway bar links prior to the oil pan skid plate if present according to torque specifications of 20 nm (15 ft. Lbs.). Lower the vehicle after removing safety stands and then reassemble the tire along with wheel assembly.