How to replace the front sway bar bushing on Chevrolet Impala?

A vehicle support system should be installed before starting the sway bar bushing replacement process. First remove the left and right side sway bar bushing bracket bolts and after that disconnect both left and right side sway bar bushing brackets. The left and right side sway bar bushings must be removed from their position on the sway bar. The procedure for installing sway bar bushings involves attaching them first to the sway bar before reattaching the sway bar bushing brackets to their respective sides. Follow the fastener notice and install the left and right side sway bar bushing bracket bolts after tightening them to 42 N.m (31 lb ft). Finally, lower the vehicle.

How to Service and Repair the Rear Sway Bar Bushing on Chevrolet Impala?

The service and repair of the rear sway bar bushing needs the motor vehicle to be properly raised. The first step requires you to take out the bolt from the sway bar shaft insulator bracket before extracting the sway bar shaft insulator bracket. You must unfasten the sway bar shaft insulator from its position on the sway bar shaft. The installation process starts by reattaching the sway bar shaft insulator to the sway bar shaft then putting back the sway bar shaft insulator bracket. Installation of the sway bar shaft bracket nut requires following the Fastener Notice in Service Precautions while torquing it to 48 Nm (35 ft. lbs.). Finally, lower the vehicle.

OEM Chevrolet Impala Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Sway Bar Bushings found

View related parts
Chevrolet Impala Stabilizer Link Bushing Part Number: 14094462
$4.36 MSRP: $10.59
You Save: $6.23 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Stabilizer Bar Insulator; Stabilizer Shaft Bushing; Bushings
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996, 1985 Chevrolet Impala | Base, SS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Stabilizer Bar Bushing, Rear Part Number: 13281790
$8.19 MSRP: $14.61
You Save: $6.42 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Sway Bar Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Stabilizer Bar Bushing Part Number: 10351313
$9.37 MSRP: $16.76
You Save: $7.39 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Stabilizer Bar Bushing Part Number: 10351312
$9.16 MSRP: $16.36
You Save: $7.20 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Position: Rear
- Replaces: 10284253
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Stabilizer Bar Bushing, Green Part Number: 10284149
$10.62 MSRP: $18.97
You Save: $8.35 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Stabilizer Bar Insulator; Bushing; Bushings
- Position: Front
- Replaces: 10289145, 25833525
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Stabilizer Bar Bushing, Blue Part Number: 10275555
$9.20 MSRP: $16.43
You Save: $7.23 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Stabilizer Bar Insulator; Bushing; Bushings
- Position: Front
- Replaces: 25833523, 10403188
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Stabilizer Bar Part Number: 14094461
$13.11
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Stabilizer Bar Bushing; Link Bushing; Shaft Insulator; Bar Insulator; Shaft Bushing.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Lower Control Arm Bushing Part Number: 6270752
$1.18 MSRP: $1.86
You Save: $0.68 (37%)
Product Specifications
- Other Name: Insulator-Stabilizer Shaft Link; Control Arm Bushing; Axle Pivot Bushing; Stabilizer Link Bushing; Strut Mount Bushing; Stabilizer Link Kit; Insulator; Shock Absorber/Strut; Steering Anti-Shock.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Stabilizer Bar Insulator, Rear Part Number: 10284254
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Sway Bar Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Stabilizer Shaft Bushing, Front Part Number: 472117
Product Specifications
- Other Name: Insulator, Front Stabilizer Shaft; Sway Bar Bushing; Stabilizer Bar Insulator; Insulator, Stabilizer Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Stabilizer Bar Insulator Part Number: 10287711
Product Specifications
- Other Name: Bushing; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Bushings
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Stabilizer Link Bushing Part Number: 10178646
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS

Chevrolet Impala Sway Bar Bushing

Want to cut long-term maintenance and repair costs? Choose OEM Sway Bar Bushing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Sway Bar Bushing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Sway Bar Bushing in Chevrolet Impala vehicles will be discussed and will be seen to play a significant role in the stability and handling of the ride. They also support the sway bar so that it operates as required to balance the vehicle. There exists the risk that almost always, due to the fact that Sway Bar Bushings are consumable and tend to wear out, it can cause the sway bar to loosen up and thus affect the vehicle handling and safety significantly. Multiple generations of Sway Bar Bushing have been designs and used applied on the Impala, however, the specific differenced are unknown. The primary function remains consistent: for anchoring of the sway bar to ensure it has a firm place to fix on to thereby improving the performance of the car. Sway Bar Bushings experience wear and tear with usage and therefore should be replaced at a certain time to improve on car safety during use.

Chevrolet Impala Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing, Green
10284149
Q: How to replace the front sway bar bushing on Chevrolet Impala?
A:
A vehicle support system should be installed before starting the sway bar bushing replacement process. First remove the left and right side sway bar bushing bracket bolts and after that disconnect both left and right side sway bar bushing brackets. The left and right side sway bar bushings must be removed from their position on the sway bar. The procedure for installing sway bar bushings involves attaching them first to the sway bar before reattaching the sway bar bushing brackets to their respective sides. Follow the fastener notice and install the left and right side sway bar bushing bracket bolts after tightening them to 42 N.m (31 lb ft). Finally, lower the vehicle.
Stabilizer Bar Bushing
10351312
Q: How to Service and Repair the Rear Sway Bar Bushing on Chevrolet Impala?
A:
The service and repair of the rear sway bar bushing needs the motor vehicle to be properly raised. The first step requires you to take out the bolt from the sway bar shaft insulator bracket before extracting the sway bar shaft insulator bracket. You must unfasten the sway bar shaft insulator from its position on the sway bar shaft. The installation process starts by reattaching the sway bar shaft insulator to the sway bar shaft then putting back the sway bar shaft insulator bracket. Installation of the sway bar shaft bracket nut requires following the Fastener Notice in Service Precautions while torquing it to 48 Nm (35 ft. lbs.). Finally, lower the vehicle.