How to Replace the Front Lower Control Arm Bushing on Chevrolet Impala?

You must first remove the lower Control Arm and clamp it into a vise before you begin this process. Fasten the puller bolt with a 1/2 x 20 in standard thread nut. Order your bushing removal tools by assembling the nut , j 21474-01 washer , j 21474-01 bearing , j 21474-5 and j 21474-01 puller bolt . Full tighten the puller bolt until it removes the bushing before removing the j 21474-01 and j 21474-5 components. During the installation process apply liquid hand soap or equivalent to new bushings before using the 1/2 x 20 in standard thread nut with puller bolt. Use the following tools for bushing installation: nut together with j 21474-01 washer and j 21474-01 bearing plus j 21474-5 and j 21474-01 puller bolt. The puller bolt must be tightened until the bushing is fully seated into the Control Arm before disassembly of j 21474-01 and j 21474-5 takes place. Control Arm extraction from the vise leads to lower Control Arm installation.

What tools are required to service and repair the control arm bushing in the front suspension on Chevrolet Impala?

The necessary tools for front suspension Control Arm Bushing service and repair include Control Arm Bushing service set (J 21474-01) alongside puller bolt (J 21474-27) and bushing installer (J 21474) and driven sprocket support bearing installer (J 34126) as well as front knuckle support (J 35379) and nut (J 21474-4). From Control Arm Bushing service set (J 21474-01) to nut (J 21474-4) the following tools are necessary for Control Arm Bushing service tasks. These include puller bolt (J 21474-27) bushing installer (J 21474) driven sprocket support bearing installer (J 34126) front knuckle support (J 35379). The next step requires installation of the lower Control Arm into a vice for secure maintenance. Trace a line on the lower Control Arm which runs along its bushing flange flat edge. Join j 23444-a (or an equivalent high pressure lubricant) to the threads of the puller bolt (J 21474-27). Position all extraction tools with puller bolt (J 21474-27), j 41014-1, driven sprocket support bearing installer (J 34126), front knuckle support (J 35379) and bushing installer (J 21474-02) before attaching the nut (J 21474-4). Clamp the nut (J 21474-4) to loosen the assembly tools from the parts. The desired alignment of the lower Control Arm vertical bushing during installation reinstalls the vehicle's native ride quality together with handling characteristics and road feedback. Next position the bushing flange flat edge along the Control Arm mark so it develops a 30-degree angle from the centerline facing outboard. Position the bushing into the Control Arm while using j 23444-a (an equivalent lubricant to J 23444-A) applied to the puller bolt's threads (J 21474-27). Use these tools: puller bolt (J 21474-27), j 41014-1, bushing installer (J 21474-5), and nut (J 21474-4). When ready, tighten the nut (J 21474-4) and remove the tools to install the lower Control Arm afterward.

OEM Chevrolet Impala Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Control Arm Bushings found

View related parts
Chevrolet Impala Control Arm Bushing, Front Upper Part Number: 371793
$7.94 MSRP: $12.44
You Save: $4.50 (37%)
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Upper Control Arm; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Bushing; Upper Bushing; Bushing; Bushings; Bushing, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaced by: 14020223
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Control Arm Bushing, Lower Part Number: 351286
$13.11
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Axle Pivot Bushing; Lower Control Arm Bushing; Front Bushing; Lower Bushing; Steering Knuckle Bushing.
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Lower Control Arm Rear Bushing Part Number: 84008847
$43.13 MSRP: $74.07
You Save: $30.94 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing-Front Lower Control Arm Rear; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Lower
- Replaces: 23121594, 20835938, 22854824
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Control Arm Bushing, Green, Rear Part Number: 10000953
$14.69 MSRP: $18.09
You Save: $3.40 (19%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Suspension Control Arm Bushing Kit; Axle Support Bushing; Axle Beam Mount; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Bushings, Orange, Rear Part Number: 10000952
$6.86 MSRP: $18.09
You Save: $11.23 (63%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Suspension Control Arm Kit; Axle Support Bushing; Beam Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Lower Control Arm Rear Bushing Part Number: 84248227
$48.50 MSRP: $84.99
You Save: $36.49 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing-Front Lower Control Arm Rear; Control Arm Bushing; Axle Pivot Bushing; Bushing, Steering Knuckle Lower Control Arm
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Impala | LS, LT, Premier | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Control Arm Bushing, Rear Part Number: 22927294
$17.82 MSRP: $29.34
You Save: $11.52 (40%)
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Rear Suspension Control Arm; Axle Beam Mount; Trailing Arm Bushing; Front Upper Control Arm Bushing; Bushings; Bushing, Rear Axle Control Arm
- Position: Rear
- Replaces: 13219149
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Control Arm Bushing, Upper Part Number: 14020223
$7.94 MSRP: $12.44
You Save: $4.50 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Steering Knuckle Upper Control Arm; Suspension Control Arm Bushing; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Bushing; Upper Bushing; Control Arm Bushings; Upper Control Arm Shaft Bushing.
- Position: Upper
- Replaces: 00371793, 371793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala
- 1984-1985 Chevrolet Impala
View related parts
Chevrolet Impala Control Arm Bushing, Rear Part Number: 13219169
$20.34 MSRP: $33.50
You Save: $13.16 (40%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Axle Beam Mount; Lower Control Arm Inner Bushing; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Lower Control Arm Front Bushing Part Number: 10412124
$22.91 MSRP: $37.72
You Save: $14.81 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10393215, 10255029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Impala Lower Control Arm Bushing, Front Part Number: 10403698
$18.15 MSRP: $29.88
You Save: $11.73 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10412685, 10441232, 10294083
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Control Arm Bushing, Front Lower Part Number: 14041609
Product Specifications
- Other Name: Bushing Assembly-Steering Knuckle Lower Control Arm Front; Suspension Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Bushing; Rear & Front Bushings; Steering Knuckle Bushing.
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Lower Control Arm Bushing, Front Part Number: 10260991
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10264395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Lower Control Arm Bushing, Rear Part Number: 10000954
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Control Arm Bushing; Axle Beam Mount; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS

Chevrolet Impala Control Arm Bushing

Want to cut long-term maintenance and repair costs? Choose OEM Control Arm Bushing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Control Arm Bushing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Impala Control Arm Bushing is one of the most vital parts in any Chevrolet Impala car due to its excellence in suspension. This bushing isolates the control arm and reduces the amount of contact between the control arm and the car body as the car responds to the road's irregularities and the driver steers. This Chevrolet Impala Control Arm Bushing can fit almost all the models of Impala; this makes it suitable for any driver who wishes to bring the Impala to another level of performance and safety. Chevrolet has used the following materials on Control Arm Bushing; rubber, steel, aluminum and polyurethane which possess different qualities. Although rubber is economic, polyurethane offers better lasting, satisfying the varying demand of driving. The importance of the Chevrolet Impala Control Arm Bushing is the provision of rightful positioning of the wheel and steadiness, which is important to drive safely. In the same manner, the cross-section design of the bushing reduces horizontal fluctuation of the wheels to minimize any negative impacts of instability to the cars' performance. Customary aspects of the Chevrolet Impala Control Arm Bushing that makes it to stand out amongst others in the market are the/customized materials and engineering, which assure that it is suited to be utilized under routine usage as well as high intensity use. In general, the Chevrolet Impala Control Arm Bushing stands out to be one of the Chevrolet's prime products showing its devotion to quality, making it crucial to have this equipment if one owns a Chevrolet Impala car and strives for better and safer performance.

Chevrolet Impala Control Arm Bushing Parts and Q&A

Lower Control Arm Front Bushing
10412124
Q: How to Replace the Front Lower Control Arm Bushing on Chevrolet Impala?
A:
You must first remove the lower Control Arm and clamp it into a vise before you begin this process. Fasten the puller bolt with a 1/2 x 20 in standard thread nut. Order your bushing removal tools by assembling the nut , j 21474-01 washer , j 21474-01 bearing , j 21474-5 and j 21474-01 puller bolt . Full tighten the puller bolt until it removes the bushing before removing the j 21474-01 and j 21474-5 components. During the installation process apply liquid hand soap or equivalent to new bushings before using the 1/2 x 20 in standard thread nut with puller bolt. Use the following tools for bushing installation: nut together with j 21474-01 washer and j 21474-01 bearing plus j 21474-5 and j 21474-01 puller bolt. The puller bolt must be tightened until the bushing is fully seated into the Control Arm before disassembly of j 21474-01 and j 21474-5 takes place. Control Arm extraction from the vise leads to lower Control Arm installation.
Lower Control Arm Bushing, Front
10403698
Q: What tools are required to service and repair the control arm bushing in the front suspension on Chevrolet Impala?
A:
The necessary tools for front suspension Control Arm Bushing service and repair include Control Arm Bushing service set (J 21474-01) alongside puller bolt (J 21474-27) and bushing installer (J 21474) and driven sprocket support bearing installer (J 34126) as well as front knuckle support (J 35379) and nut (J 21474-4). From Control Arm Bushing service set (J 21474-01) to nut (J 21474-4) the following tools are necessary for Control Arm Bushing service tasks. These include puller bolt (J 21474-27) bushing installer (J 21474) driven sprocket support bearing installer (J 34126) front knuckle support (J 35379). The next step requires installation of the lower Control Arm into a vice for secure maintenance. Trace a line on the lower Control Arm which runs along its bushing flange flat edge. Join j 23444-a (or an equivalent high pressure lubricant) to the threads of the puller bolt (J 21474-27). Position all extraction tools with puller bolt (J 21474-27), j 41014-1, driven sprocket support bearing installer (J 34126), front knuckle support (J 35379) and bushing installer (J 21474-02) before attaching the nut (J 21474-4). Clamp the nut (J 21474-4) to loosen the assembly tools from the parts. The desired alignment of the lower Control Arm vertical bushing during installation reinstalls the vehicle's native ride quality together with handling characteristics and road feedback. Next position the bushing flange flat edge along the Control Arm mark so it develops a 30-degree angle from the centerline facing outboard. Position the bushing into the Control Arm while using j 23444-a (an equivalent lubricant to J 23444-A) applied to the puller bolt's threads (J 21474-27). Use these tools: puller bolt (J 21474-27), j 41014-1, bushing installer (J 21474-5), and nut (J 21474-4). When ready, tighten the nut (J 21474-4) and remove the tools to install the lower Control Arm afterward.