Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 10260991
Lower Control Arm Bushing, Front

1997-2016 GM

Customer Questions & Expert Answers (10)
GM 10260991 Lower Control Arm Bushing, Front
  • Part Description
    Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing
  • Position
    Front Lower
  • Replaces
    10264395
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 10260991 Lower Control Arm Bushing, Front is Ref No. 4 in the diagram below

    2001 Pontiac Aztek Lower Control Arm Bushing, Front Diagram for 10260991
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 10260991

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2004 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2000-2013 Chevrolet Impala50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 10260991 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 10260991 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What tools are needed to replace the lower control arm bushings for the 2003 Buick Century? Posted by Customer
    A:
    Control Arm Bushing Service Set (J 21474-01), Puller Bolt (J 21474-27), Bushing Installer (J 21474), Bushing Installer (J 21474-2), Nut (J 21474-4), High Pressure Lubricant (J 23444-A), Driven Sprocket Support Bearing Installer (J 34126), and Front Knuckle Support (J 35379).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    Q:
    How do you prepare for bushing installation for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Lubricate the bushing with liquid hand soap or an equivalent, and assemble the bushing installation tools, including the nut, J 21474-01 washer, J 21474-01 bearing, J 21474-5, and J 21474-01 puller bolt.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    Q:
    Why is it important to install the lower control arm vertical bushing in the same position for the 2002 Buick Rendezvous? Posted by Customer
    A:
    To maintain the original vehicle ride, handling, and road feel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    Q:
    How should it be lifted for this procedure for the 2000 Buick Regal? Posted by Customer
    A:
    Lift the vehicle using only a frame-contact vehicle lift, not a suspension-contact lift.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    Q:
    How should the bushing be aligned during installation for the 2006 Buick Terraza? Posted by Customer
    A:
    Align the flat edge of the bushing to be 90 degrees to the fluid axis, which is 9 degrees from the center line of the control arm.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    Q:
    What should be done after installing the bushing for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Disassemble the J 21474-01 and J 21474-5, remove the control arm from the vice, and finally install the lower control arm.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    Q:
    What should be done before installing the new bushing for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Lubricate the new bushing with liquid hand soap or an equivalent.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    Q:
    What tools are recommended for the removal of the bushing for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Utilize the tools from the Control Arm Bushing Set (J 21474-01), specifically the J-6627-4, Control Arm Bushing Receiver (J 45411), J-21474-8, and J-21474-4.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    Q:
    What alignment is necessary for the bushing flange during installation for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Align the flat edge of the bushing flange to the mark on the control arm, ensuring it is 30 degrees from the centerline and that the thin slot in the bushing faces outboard.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Control Arm Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Control Arm Bushing, Front 10260991 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10260991 Lower Control Arm Bushing, Front is available in the market under the name GM Control Arm Bushing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10260991 Lower Control Arm Bushing, Front fits certain Chevrolet Impala, Monte Carlo, Uplander models, as well as Buick Regal, LaCrosse, Century. Additionally, it is compatible with Pontiac Grand Prix, Aztek, Montana and Oldsmobile Intrigue, Silhouette models.
The original GM component designated by Manufacturer Part Number 10260991 maintains top performance when functioning as the Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing unit at its Front Lower. The component 10260991 is constructed from durable material and its dimensions span 3.0 x 2.6 x 2.2 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lower Control Arm Rear Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm. The part 10260991 has available replacement options 10264395. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.