Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 88965333
Ball Joint

1997-2016 GM

Customer Questions & Expert Answers (11)
GM 88965333 Ball Joint
  • Part Description
    Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint
  • Position
    Front Lower
  • Replaces
    88955451, 22157089
  • Manufacturer
    General Motors
Make sure this part fits
$48.48 MSRP: $82.54
You Save: $34.06 (42%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 88965333 Ball Joint is Ref No. 8 in the diagram below

    2001 Pontiac Aztek Ball Joint Diagram for 88965333
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88965333

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1997-2003 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2012-2015 Chevrolet Captiva SportLS, LT, LTZ4 Cyl 2.4 L FLEX, 6 Cyl 3.0 L FLEX
    2005-2009 Chevrolet EquinoxLS, LT, LTZ, Sport6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
    2000-2013 Chevrolet Impala50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 88965333 compatible with my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 88965333 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What are the final steps after completing the installation for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Reinstall the tire and wheels, lower the vehicle, and check the wheel alignment.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What is the torque specification for the new ball stud nuts for the 2002 Buick Century? Posted by Customer
    A:
    Install the NEW ball stud nuts and tighten them to 68 Nm (50 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What is the installation process for the new ball stud for the 2002 Buick Regal? Posted by Customer
    A:
    Place the ball stud back into the lower control arm and install the NEW ball stud bolts facing down, away from the ball stud.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What should be done after removing the tires and wheels for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Remove the lower control arm and secure it in a vice.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What should be done if the fastener criteria are not met for the 2006 Buick Terraza? Posted by Customer
    A:
    The fastener must be replaced.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What size drill bit should be used to drill through the ball joint rivets for the 2006 Chevrolet Equinox? Posted by Customer
    A:
    Use an 8 mm (5/16 inch) drill bit.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What should be done to the ball stud rivet heads for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Drill or grind off the ball stud rivet heads.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What is the torque specification for the new ball stud nuts for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the NEW ball stud nuts and tighten them to 68 Nm (50 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What should be done after installing the ball stud for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Install the NEW ball stud nuts and tighten them to 68 N.m (50 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    Q:
    What is the torque specification for the new ball stud nuts for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Tighten the NEW ball stud nuts to 68 Nm (50 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Ball Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Ball Joint 88965333 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88965333 Ball Joint is available in the market under the name GM Ball Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88965333 Ball Joint fits certain Chevrolet Equinox, Impala, Monte Carlo models, as well as Buick Regal, LaCrosse, Century. Additionally, it is compatible with Pontiac Grand Prix, Torrent, Aztek and Oldsmobile Aurora, Intrigue, Silhouette models.
The original GM component designated by Manufacturer Part Number 88965333 maintains top performance when functioning as the Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint unit at its Front Lower. The component 88965333 is constructed from durable material and its dimensions span 7.1 x 4.3 x 4.3 inches while weighing 1.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lower Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm. The part 88965333 has available replacement options 88955451, 22157089. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.