How to replace the front shock absorber assembly on Chevrolet Impala?

Begin by taking out the upper nuts of the strut assembly before the replacement work starts. The vehicle requires a frame-contact vehicle lift to perform the upgrade so avoid using suspension-contact methods. After raising the vehicle and securing it properly you should take out the tire and wheel while marking the strut against the knuckle. Begin by starting with the removal of strut lower nuts and bolts followed by removing the strut itself. Begin your installation by putting the strut in position following the instructions provided by the Fastener Notice in Service Precautions. Tighten the strut upper nuts to 33 Nm (24 ft. lbs.) during installation. The strut lower bolts and nuts are prevailing torque types which can be reused if both components are rust-free clean and develop 3 Nm (27 in. lbs.) before reaching the final seating position. otherwise, replace the fastener. Guided by the knuckle mark apply a torque of 122 Nm (90 ft. lbs.) to the strut lower nuts. Reinstall the tire and wheel followed by lowering the vehicle before performing front wheel alignment.

How to properly dispose of a front shock absorber on Chevrolet Impala?

Before beginning the disposal of the suspension strut wear suitable eye protection to prevent accidents from drilling metal. Set the strut in a vise horizontally while extending the rod to its maximum length. At the end cap's center create a hole with a 5 mm (3/16 in.) drill bit for gas or gas and oil mixture drainage purposes. We need to use shop towels to collect the oil during this process. The drilling step ends with removing the strut from the vise before positioning it vertically with the hole towards the drain pan. Use the rod to guide the fluid out of the tube while completely removing all oil from the strut assembly.

OEM Chevrolet Impala Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Shock Absorbers found

View related parts
Chevrolet Impala Shock Absorber Part Number: 88945177
$58.76 MSRP: $104.92
You Save: $46.16 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Front Shock; Shock
- Position: Front
- Replaces: 12322202, 22064421, 22046455, 22046424, 22064601, 22065201, 22064298
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Shock Absorber, Rear Upper Driver Side Part Number: 84682962
$95.92 MSRP: $186.20
You Save: $90.28 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Replaces: 22952902, 84185486
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | LS, LT, LTZ, Premier | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Shock Absorber, Rear Upper Passenger Side Part Number: 84185490
$121.18 MSRP: $237.26
You Save: $116.08 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Passenger Side
- Replaces: 23153964, 22979260
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Chevrolet Impala | LS, LT, LTZ, Premier | 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Strut Part Number: 23269415
$71.82 MSRP: $197.43
You Save: $125.61 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Front And Rear Suspension; Suspension Strut Assembly Kit; Complete Strut Set; Complete Strut; Shock Absorber
- Position: Front
- Replaces: 22796873
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | LS, LT, LTZ | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Strut, Driver Side Part Number: 84637385
$68.53 MSRP: $202.12
You Save: $133.59 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Front And Rear Suspension; Shock Absorber
- Position: Driver Side
- Replaced by: 85051607
- Replaces: 23390185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | LS, LT, LTZ | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Impala Shock Absorber, Front Part Number: 4993745
$36.24 MSRP: $64.72
You Save: $28.48 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Front Shock
- Position: Front
- Replaced by: 88946013
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Shock Absorber Part Number: 88945188
$48.44 MSRP: $86.50
You Save: $38.06 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Rear Shock; Shock
- Position: Rear
- Replaces: 22064413, 22064299, 22064856, 22064265, 22046428, 22064422, 22064043, 22064101, 22046810
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Shock Absorber Part Number: 88986629
$56.22 MSRP: $104.92
You Save: $48.70 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Replaced by: 88945177
- Replaces: 22064042, 22064264, 22064412, 22064618, 22046456
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Strut, Rear Part Number: 23269417
Product Specifications
- Other Name: Strut Assembly-Rear Suspension; Shock Absorber; Strut, Front And Rear Suspension
- Position: Rear
- Replaces: 22796280
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Shock Absorber Part Number: 22046423
Product Specifications
- Other Name: Absorber, Shock; Shock
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Shock Absorber, Rear Part Number: 22065228
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Suspension Strut Assembly Kit; Complete Strut; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22046427, 22065220, 12322209, 22046430, 22047545, 22047246, 22046480
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Shock, Rear Upper Driver Side Part Number: 22952906
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock Absorber
- Position: Rear Upper Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014 Chevrolet Impala | Eco | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Chevrolet Impala Shock, Rear Upper Passenger Side Part Number: 22952907
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock Absorber
- Position: Rear Upper Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014 Chevrolet Impala | Eco | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Chevrolet Impala Shock Absorber, Rear Part Number: 22064425
Product Specifications
- Other Name: Absorber Assembly-Rear Shock; Suspension Strut Assembly Kit; Air Suspension Strut; Complete Strut Kit; Complete Strut; Absorber, Front And Rear Suspension; Absorber, Shock Absorber Air Lift
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Shock Absorber, Rear Part Number: 22064426
Product Specifications
- Other Name: Absorber Assembly-Rear Shock; Suspension Strut Assembly Kit; Air Suspension Strut; Complete Strut Kit; Complete Strut; Absorber, Front And Rear Suspension; Absorber, Shock Absorber Air Lift
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Impala | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Shock Absorber, Rear Part Number: 22064040
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock
- Position: Rear
- Replaced by: 22003121
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Impala | Base | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Strut, Front Part Number: 19257874
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Shock Absorber; Strut, Front And Rear Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet Impala | Police | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Impala Strut Part Number: 88965468
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Complete Strut Kit; Shock Absorber.; Strut, Front And Rear Suspension
- Position: Rear
- Replaces: 15846383, 15846386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Strut Part Number: 88965469
Product Specifications
- Other Name: Strut Assembly, Rear Suspension; Complete Strut Kit; Shock Absorber.; Strut, Front And Rear Suspension
- Position: Rear
- Replaces: 22064710, 22400003, 22064747, 15846384, 22064752, 22064751, 22064736, 15846385, 22064753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Strut Part Number: 23269413
Product Specifications
- Other Name: Strut, Front And Rear Suspension; Shock Absorber
- Position: Front
- Replaces: 22796874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

| Page 1 of 2 |Next >

1-20 of 35 Results

Chevrolet Impala Shock Absorber

Want to cut long-term maintenance and repair costs? Choose OEM Shock Absorber. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Shock Absorber includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Shock Absorber of Chevrolet Impala automobiles is yet another key component that is involved in the suspension systems and which works hand in hand with the struts. Some of these components are useful in reducing bouncing and managing shock impulses which in turn enhance the ride quality as well as handling of the vehicle. Chevrolet Impala vehicles have had numerous shock absorbers over the years with types such as the twin-tube and mono-tube with dissimilar mechanisms of controlling the flows of hydraulic fluid to improve the vehicle's response to various driving conditions. PRV stands for Position Sensitive Damping and ASD for Acceleration Sensitive Damping, which go to the extent of refining the shock absorber's response under certain specific driving conditions; electrorheological, and magnetorheological dampers enables semi-active, adaptive suspension system for improved comfort and control in addition to comfort.

Chevrolet Impala Shock Absorber Parts and Q&A

Strut
88965467
Q: How to replace the front shock absorber assembly on Chevrolet Impala?
A:
Begin by taking out the upper nuts of the strut assembly before the replacement work starts. The vehicle requires a frame-contact vehicle lift to perform the upgrade so avoid using suspension-contact methods. After raising the vehicle and securing it properly you should take out the tire and wheel while marking the strut against the knuckle. Begin by starting with the removal of strut lower nuts and bolts followed by removing the strut itself. Begin your installation by putting the strut in position following the instructions provided by the Fastener Notice in Service Precautions. Tighten the strut upper nuts to 33 Nm (24 ft. lbs.) during installation. The strut lower bolts and nuts are prevailing torque types which can be reused if both components are rust-free clean and develop 3 Nm (27 in. lbs.) before reaching the final seating position. otherwise, replace the fastener. Guided by the knuckle mark apply a torque of 122 Nm (90 ft. lbs.) to the strut lower nuts. Reinstall the tire and wheel followed by lowering the vehicle before performing front wheel alignment.
Strut
88965468
Q: How to properly dispose of a front shock absorber on Chevrolet Impala?
A:
Before beginning the disposal of the suspension strut wear suitable eye protection to prevent accidents from drilling metal. Set the strut in a vise horizontally while extending the rod to its maximum length. At the end cap's center create a hole with a 5 mm (3/16 in.) drill bit for gas or gas and oil mixture drainage purposes. We need to use shop towels to collect the oil during this process. The drilling step ends with removing the strut from the vise before positioning it vertically with the hole towards the drain pan. Use the rod to guide the fluid out of the tube while completely removing all oil from the strut assembly.