How to replace the Brake Proportioning Valve on Chevrolet Tahoe?

You need to locate the identification code of the old combination valve before purchasing its replacement. First disconnect all electrical parts from the combination valve then remove the front and rear brake pipes before taking out the valve assembly. For proper valve installation insert the new combination valve having the same punched id code as the original part. Reinsert the combination valve into its place before connecting the brake pipes. Tighten all brake pipe nuts to 25 nm pression (18 ft. Pounds). Connect the combination valve electrical part while pressing the metering rod after the brake system bleed process. Use proper steps to remove remaining air from the brake lines.

How to Properly Replace a Brake Proportioning Valve on Chevrolet Malibu?

To replace the proportioning valve, the first thing one must do is take off the 2 brake pipes out of the valve while using the bleeder valve cover to prevent breaks from draining out and protect it from contamination; label and mark of the brake pipes to facilitate the installation. After that, just remove the 4 brake pipes from the valve, using caps again to avoid losing any fluid. Take off the 2 proportioning valve bracket nuts and extract the proportioning valve assembly. For installation, replace the proportioning valve assembly with the back and use the 2 bracket nuts to tighten them up to 10 Nm (89 inch lbs). After plucking out the tape marking the positions of the braking pipes, make sure you have connected the braking pipe to the braking pressure modulator valve to prevent wear lockup as the only method to detect the wear lockup is through a Scan Tool or through a braking applied stop. Subsequently, remove the caps from 4 brake pipes and attach them to the proportioning valve tightening the fittings up to 20 Nm (15ft. lbs). Lastly, take off the caps of the 2 brake pipes and attach them to the proportioning valve and tighten them also to 20 Nm (15 ft. lbs.,) and bleed the brake system.

OEM Chevrolet Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

77 Brake Proportioning Valves found

View related parts
Chevrolet Pressure Metering Valve Part Number: 18014469
$13.11 MSRP: $16.23
You Save: $3.12 (20%)
ADD TO CART
Product Specifications
- Other Name: Brake Proportioning Valve; Valve
Fits the following Chevrolet Models:
- Impala | 2000-2007 | Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
- Lumina APV | 1992-1996 | Base, CL, LS | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
- Monte Carlo | 2000-2007 | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Pressure Metering Valve Part Number: 14063941
Product Specifications
- Other Name: Valve Assembly, Brake Combination; Brake Proportioning Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
Fits the following Chevrolet Models:
- Chevette | 1984-1987 | Base, CS | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L DIESEL
View related parts
Chevrolet Pressure Metering Valve Part Number: 15821482
Product Specifications
- Other Name: Valve-Brake Master Cylinder Proportioning; Brake Proportioning Valve; Valve; Valve, Brake Master Cylinder Proportioning
Fits the following Chevrolet Models:
- Malibu | 2004 | Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chevrolet Valve Part Number: 15847196
Product Specifications
- Other Name: Valve-Brake Master Cylinder Proportioning; Valve, Brake Master Cylinder Proportioning
Fits the following Chevrolet Models:
- Malibu | 2005-2007 | Base, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Pressure Metering Valve Part Number: 22701249
Product Specifications
- Other Name: Valve Assembly-Brake Proportioning; Brake Proportioning Valve; Valve, Brake Master Cylinder Proportioning
Fits the following Chevrolet Models:
- Classic | 2004-2005 | Base, LS | 4 Cyl 2.2 L GAS
- Malibu | 2003 | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Valve Part Number: 15557344
Product Specifications
- Other Name: Valve Assembly-Brake Combination; Brake Proportioning Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
Fits the following Chevrolet Models:
- C1500 | 1988-1990 | 454 SS, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 | 1988-1990 | Cheyenne, Scottsdale, Silverado | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- C3500 | 1988-1990 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 | 1988-1990 | Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K2500 | 1988-1990 | Cheyenne, Scottsdale, Silverado | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
- K3500 | 1988-1990 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Control Valve Part Number: 15618243
Product Specifications
- Other Name: Valve, Hydraulic Brake Comboination/Monitoring Valve; Brake Proportioning Valve; ABS Control Module; Pressure Valve; Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
Fits the following Chevrolet Models:
- S10 | 1994-1995, 1989-1990 | Base, Durango, LS, Sport, Tahoe | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
- S10 Blazer | 1989-1990 | Base, High Country, Sport, Tahoe | 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Pressure Metering Valve Part Number: 12548265
Product Specifications
- Other Name: Valve Kit, Brake Combination; Brake Proportioning Valve; Valve; Valve Kit, Hydraulic Brake Combination/Monitoring Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
Fits the following Chevrolet Models:
- C1500 | 1995-1999 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1995-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1995-2000 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1995-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1995-2000 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- Express 3500 | 1996-2002 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
- K1500 | 1995-1999 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1995-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1995-2000 | Base, Cheyenne, LS, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1995-1999 | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Pressure Metering Valve Part Number: 30021018
Product Specifications
- Other Name: Valve, Brake Master Cylinder Proportioning; Brake Proportioning Valve
Fits the following Chevrolet Models:
- Tracker | 1999-2004 | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Modulator Valve Part Number: 15923034
Product Specifications
- Other Name: Valve, Electronic Brake Control; Modulator
Fits the following Chevrolet Models:
- Impala | 2008-2011 | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Pressure Valve Part Number: 88983913
Product Specifications
- Other Name: Valve, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve, Electronic Brake Control
- Replaces: 88982364, 88948552
Fits the following Chevrolet Models:
- Avalanche 1500 | 2002 | Base, North Face, On Road Edition, Z71 | 8 Cyl 5.3 L GAS
- Avalanche 2500 | 2002 | Base | 8 Cyl 8.1 L GAS
- Silverado 1500 | 2002 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 HD | 2002 | LS, LT | 8 Cyl 6.0 L GAS
- Tahoe | 2002 | LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Pressure Metering Valve Part Number: 22732890
Product Specifications
- Other Name: Valve Assembly-Brake Proportioning; Brake Proportioning Valve; Valve; Valve, Brake Master Cylinder Proportioning
Fits the following Chevrolet Models:
- Equinox | 2005-2006 | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Pressure Metering Valve Part Number: 30016527
Product Specifications
- Other Name: Valve, Brake Master Cylinder Proportioning
Fits the following Chevrolet Models:
- Metro | 1998 | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
View related parts
Chevrolet Pressure Valve Part Number: 15768819
Product Specifications
- Other Name: Valve Assembly-Brake Combination; Valve, Hydraulic Brake Combination/Monitoring Valve
Fits the following Chevrolet Models:
- S10 | 2000-2002 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Pressure Metering Valve Part Number: 30016069
Product Specifications
- Other Name: Valve, Brake Master Cylinder Proportioning
Fits the following Chevrolet Models:
- Tracker | 1998 | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Pressure Metering Valve Part Number: 91173764
Product Specifications
- Other Name: Valve, Brake Master Cylinder Proportioning; Brake Proportioning Valve
Fits the following Chevrolet Models:
- Tracker | 1998 | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Modulator Valve Part Number: 19416854
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; Modulator; Valve, Electronic Brake Control
- Replaces: 25966978
Fits the following Chevrolet Models:
- Corvette | 2009 | Base, Z06, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Pressure Module Valve Part Number: 12547213
Product Specifications
- Other Name: Valve, Electronic Brake Control; Modulator
Fits the following Chevrolet Models:
- Astro | 1993-1995 | Base, CL, CS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Pressure Modulator Valve Part Number: 12527809
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; ABS Control Module; Modulator; Valve, Electronic Brake Control
Fits the following Chevrolet Models:
- Corvette | 1997-1998 | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Proportioner Valve Part Number: 18060048
Product Specifications
- Other Name: Valve, Brake Master Cylinder Proportioning; Brake Proportioning Valve; Pressure Metering Valve
- Replaces: 18011048
Fits the following Chevrolet Models:
- Lumina | 1990-1994 | Base, Euro, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
- Venture | 1997-1999 | Base, LS | 6 Cyl 3.4 L GAS

| Page 1 of 4 |Next >

1-20 of 77 Results

Chevrolet Brake Proportioning Valve

Choose OEM Brake Proportioning Valve, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Brake Proportioning Valve. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Brake Proportioning Valve retardation is continued to stop effectively by balancing the pressure such rear wheels never lock up first. Chevrolet has been pursuing utilitarian power since 1911, and its cars have continuously launched each morning without incident since then. Chevy is a combination of cars with bodies that can be washed once you are done with soccer. Chevrolet also includes amenities such as Super Cruise that reduces the fatigue of long interstates. Regardless of the budget or number of passengers, Chevy puts together a ride that appears confident and looks good. The badge has established its reputation in versatility, in nimble compacts up to work-truck brutes, but they all have a simple design that drivers understand quickly. Economical components and straightforward controls imply owners do not waste time scratching heads but rather they roll. The Brake Proportioning Valve is installed in the hydraulic circuit to regulate fluid pressure to the rear drums whenever the pedal goes into panic mode, calculating the proportion of piston area such that the rear shoes never grab harder than the front discs when panicking. The Brake Proportioning Valve, which reacts immediately to increased input pressure, delivers only enough force in the rearward direction in spite of the fronts being fed to their full strength by the master cylinder. Chevrolet uses this small regulator in all its braking systems to transform hydraulic math to smooth, drama-free stops.

Chevrolet Brake Proportioning Valve Parts and Q&A

Modulator Valve
89027166
Q: How to replace the Brake Proportioning Valve on Chevrolet Tahoe?
A:
You need to locate the identification code of the old combination valve before purchasing its replacement. First disconnect all electrical parts from the combination valve then remove the front and rear brake pipes before taking out the valve assembly. For proper valve installation insert the new combination valve having the same punched id code as the original part. Reinsert the combination valve into its place before connecting the brake pipes. Tighten all brake pipe nuts to 25 nm pression (18 ft. Pounds). Connect the combination valve electrical part while pressing the metering rod after the brake system bleed process. Use proper steps to remove remaining air from the brake lines.
Valve
15847196
Q: How to Properly Replace a Brake Proportioning Valve on Chevrolet Malibu?
A:
To replace the proportioning valve, the first thing one must do is take off the 2 brake pipes out of the valve while using the bleeder valve cover to prevent breaks from draining out and protect it from contamination; label and mark of the brake pipes to facilitate the installation. After that, just remove the 4 brake pipes from the valve, using caps again to avoid losing any fluid. Take off the 2 proportioning valve bracket nuts and extract the proportioning valve assembly. For installation, replace the proportioning valve assembly with the back and use the 2 bracket nuts to tighten them up to 10 Nm (89 inch lbs). After plucking out the tape marking the positions of the braking pipes, make sure you have connected the braking pipe to the braking pressure modulator valve to prevent wear lockup as the only method to detect the wear lockup is through a Scan Tool or through a braking applied stop. Subsequently, remove the caps from 4 brake pipes and attach them to the proportioning valve tightening the fittings up to 20 Nm (15ft. lbs). Lastly, take off the caps of the 2 brake pipes and attach them to the proportioning valve and tighten them also to 20 Nm (15 ft. lbs.,) and bleed the brake system.