To replace the Differential carrier assembly, there is need to raise and support the vehicle. Lower the diff to the ground, having removed the lower bolts, then pull the front propeler shaft from the diff, placing it out of the way. Next, before you take the right wheels
Drive Shaft and the left side of the wheel Drive Shaft, then remove the intermediate wheel Drive Shaft support bearing. Place a transmission jack under the Differential and firmly mount it. Unretain the front Differential to
Oil Pan mounting bolts, then remove the intermediate wheel Drive Shaft and the front Differential from the Oil Pan, then removing the Differential assembly from the vehicle. In installation, locate the Differential on transmission jack and fix it. With the Differential now attached up, fit the intermediate wheel Drive Shaft and the front Differential to the Oil Pan with the front Differential Oil Pan mounting bolts tightened in an orderly fashion to 110 n.m (81 lb ft). Get the transmission jack, and thereafter mount the intermediate wheel Drive Shaft support bearing with the left and right front wheel-drive shafts. Uninstall the front propeller shaft and install it to the Differential, then check the level of Differential lubricant. Finally, install the front frame assembly and lower the car down. Apply j 44394 seal protector as necessary during the process.