How to Replace a Front Door Window Regulator(Manual) on Buick Regal?

The front door Window Regulator replacement process starts by taking off the front door water deflector followed by removing the front door window. The next step requires removal of the arm rest bracket. The screws lead into essential slots within the inner door panel thus they can stay in place. You should first remove the left lower mounting screw of the front door Window Regulator rail before loosening the front door Window Regulator mounting screws. You can disconnect the electrical connector by placing the front door Window Regulator motor inside the door opening. You should take out the front door Window Regulator from the door after disconnecting its electrical connector. First plug in the electrical connector of the motor before inserting the new front door Window Regulator into the door opening. The motor should enter the inner door panel key positions first followed by placement of the Window Regulator rail assembly in its designated slots. Use a 10 n.m torque wrench to fasten the left lower mounting screw (89 lb in) before completion. For correct Window Regulator fitting, begin by securing the lower rear screw then move to upper rear and lower front screws before tightening the upper front screw followed by hand tightening the remaining screws to 10 n.m (89 lb in). Put back the front door window and arm rest bracket as well as front door water deflector.

How to replace the front side door window regulator on Buick Enclave?

The replacement of front side door window regulators begins by removing door trim panels which requires appropriate left-right side procedures. Begin by detaching the water deflector and afterwards remove both energy absorber retainers followed by the energy absorber component. The next step involves removing window guide to regulator bolts while also discarding covers that show the regulator bolt locations. Lift the window to the maximum upward position and disconnect the electrical connector attached to the motor of the regulator. Release the upper bolt that maintains the regulator-to-upper-inner-door connection while also removing the door-held motor nut followed by the regulator securing lower bolts. Bring the upper part of the regulator forward while removing it through the door opening while you transfer the power Window Motor as required. The first step for installation involves installing only part of the upper bolt to the regulator before inserting it through the door opening with a semi-horizontal orientation until the regulator reaches full forward position in the door cavity before completing the vertical rotation. After installing the upper bolt the regulator can be lowered onto the door sheet metal. The window support should then be removed and the window needs to be lowered onto the window guide of the regulator. The regulator window carrier bolts should be tuned loosely while operating the window until it reaches the uppermost position and confirms that it stays within the regulator channels. To complete installation there is a procedure to tighten the motor retention nut to 9 nm (80 lb in) followed by securing the regulator to door with bolts (3, 4) at 10 nm (88 lb in). Reattach the electrical connector to the regulator motor while replacing the energy absorber retainers and absorber alongside relighting the covers which disclose the regulator bolt holes. Finish the procedure by positioning the door trim panel back while using the appropriate procedures based on the left and right side of the vehicle.

OEM Buick Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

211 Window Regulators found

View related parts
Buick Window Regulator, Front Driver Side Part Number: 10180309
$90.97 MSRP: $208.24
You Save: $117.27 (57%)
ADD TO CART
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Regulator
- Position: Front Driver Side
Fits the following Buick Models:
- Regal | 1991-1993 | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Power Regulator, Front Passenger Side Part Number: 16621658
$89.89 MSRP: $247.10
You Save: $157.21 (64%)
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Front Side Door Window; Window Regulator; Regulator; Regulator, Front Door Window Regulator; Regulator, Door Lock Remote Control
- Position: Front Passenger Side
Fits the following Buick Models:
- Skylark | 1992-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Power Regulator, Rear Passenger Side Part Number: 16621660
$62.43 MSRP: $247.10
You Save: $184.67 (75%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Regulator; Window Regulator
- Position: Rear Passenger Side
Fits the following Buick Models:
- Skylark | 1992-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Window Regulator, Front Driver Side Part Number: 42748835
$25.11 MSRP: $47.16
You Save: $22.05 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Front Door Window Regulator
- Position: Front Driver Side
- Replaces: 42654617
Fits the following Buick Models:
- Encore GX | 2020-2023 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Window Regulator Part Number: 95299901
$47.85 MSRP: $86.60
You Save: $38.75 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly-Rear Side Door Window (W/O Motor); Regulator, Rear Door Window Regulator
- Position: Rear
Fits the following Buick Models:
- Encore | 2013-2020 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Window Regulator, Front Driver Side Part Number: 20952452
$142.15 MSRP: $257.28
You Save: $115.13 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Regulator Assembly; Regulator, Door Lock Remote Control
- Position: Front Driver Side
- Replaces: 13302451, 13290261
Fits the following Buick Models:
- Regal | 2011-2017 | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Window Regulator, Passenger Side Part Number: 20474282
Product Specifications
- Other Name: Regulator; Regulator, Front Door Window Regulator
- Position: Passenger Side
Fits the following Buick Models:
- Regal | 1988-1993 | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Window Regulator, Rear Driver Side Part Number: 22745794
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Regulator Assembly
- Position: Rear Driver Side
- Replaces: 13237870, 13290263
Fits the following Buick Models:
- Regal | 2011-2012 | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Window Regulator, Rear Passenger Side Part Number: 22745795
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Regulator Assembly
- Position: Rear Passenger Side
- Replaces: 13290264, 13237871
Fits the following Buick Models:
- Regal | 2011-2012 | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Window Regulator, Rear Driver Side Part Number: 22862886
Product Specifications
- Other Name: Regulator Assembly-Rear Side Door Window (Left-Hand); Regulator Assembly; Regulator, Rear Door Window Regulator
- Position: Rear Driver Side
Fits the following Buick Models:
- Regal | 2013-2017 | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Window Regulator, Rear Passenger Side Part Number: 22862887
Product Specifications
- Other Name: Regulator Assembly-Rear Side Door Window (Right-Hand); Regulator Assembly; Regulator, Rear Door Window Regulator
- Position: Rear Passenger Side
Fits the following Buick Models:
- Regal | 2013-2017 | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Window Regulator, Front Driver Side Part Number: 20474283
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Regulator
- Position: Front Driver Side
Fits the following Buick Models:
- Regal | 1988-1993 | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Window Regulator, Rear Passenger Side Part Number: 16625030
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Regulator
- Position: Rear Passenger Side
Fits the following Buick Models:
- Skylark | 1992-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Power Regulator, Driver Side Part Number: 16621659
Product Specifications
- Other Name: Regulator, Door Lock Remote Control; Window Regulator; Regulator; Regulator, Front Door Window Regulator
- Position: Driver Side
Fits the following Buick Models:
- Skylark | 1992-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Window Regulator, Front Driver Side Part Number: 20718371
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Manual Regulator
- Position: Front Driver Side
Fits the following Buick Models:
- Skylark | 1988-1991 | Base, Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Window Regulator, Front Passenger Side Part Number: 16633098
Product Specifications
- Other Name: Regulator Assembly-Front Side Door Window; Regulator; Regulator, Front Door Window Regulator; Regulator, Door Lock Remote Control
- Position: Front Passenger Side
- Replaces: 16636174
Fits the following Buick Models:
- Skylark | 1992-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Window Regulator, Front Driver Side Part Number: 15231241
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Power Window Motor and Regulator Assembly; Regulator, Door Lock Remote Control
- Position: Front Driver Side
- Replaces: 25713422, 10387928, 25769928, 25750513, 25699762
Fits the following Buick Models:
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Power Regulator, Front Passenger Side Part Number: 16636616
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Power Window Regulator Assembly; Regulator; Regulator, Door Lock Remote Control; Window Regulator
- Position: Front Passenger Side
- Replaces: 16636178, 16633100
Fits the following Buick Models:
- Skylark | 1992-1997 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Window Regulator, Front Passenger Side Part Number: 25544676
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Regulator
- Position: Front Passenger Side
Fits the following Buick Models:
- Electra | 1989-1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1990-1991 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Window Regulator, Front Driver Side Part Number: 25544677
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Regulator
- Position: Front Driver Side
Fits the following Buick Models:
- Electra | 1989-1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1990-1991 | Custom, Limited | 6 Cyl 3.8 L GAS

| Page 1 of 11 |Next >

1-20 of 211 Results

Buick Window Regulator

Choose OEM Window Regulator, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Window Regulator. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Window Regulator allows all the windows to rise or lower at a fast rate whilst maintaining cabin security. Established in 1903, Buick marked its mark early by combining plush ride comfort with predictable road manners that families have been confident in over the years. Quiet tuning technology dampens the noise of the wind and tires and thus conversation and music remain clear at even the broken road. By combining old-fashioned waterfall grilles with smartphone-wired dashboards and driver aids reducing daily stress, the company keeps the loyalty living. In 2022 the ambitious Wildcat EV concept demonstrated how Buick could move towards an all electric core capable of making long drives. Heritage is important but the brand pursues new concepts in a very short time frame since drivers desire cars that are comfortable as soon as the door is clicked behind. Crossover city to spacious sedan the badge remains concentrated on the smoothness that obliterates highway miles. The Window Regulator assemblies incorporate heavy-duty scissor or cable layouts that are aligned with either power or manual motors in order to ensure that glass runs exclusively straight even after years of door slams and winter freeze ups. All Window Regulators are of hardy precise requirements and this implies that they install directly without any cross-fit. Corrosion resistant cables and steel tracks of high grade shake off vibration to ensure the drivers retain fingertip control over airflow and safety. Durability leaves the owners without unexpected repairs and by keeping the glasses tight during sudden stops, they conserve the structure of the vehicle.

Buick Window Regulator Parts and Q&A

Window Regulator, Front Passenger Side
10434881
Q: How to Replace a Front Door Window Regulator(Manual) on Buick Regal?
A:
The front door Window Regulator replacement process starts by taking off the front door water deflector followed by removing the front door window. The next step requires removal of the arm rest bracket. The screws lead into essential slots within the inner door panel thus they can stay in place. You should first remove the left lower mounting screw of the front door Window Regulator rail before loosening the front door Window Regulator mounting screws. You can disconnect the electrical connector by placing the front door Window Regulator motor inside the door opening. You should take out the front door Window Regulator from the door after disconnecting its electrical connector. First plug in the electrical connector of the motor before inserting the new front door Window Regulator into the door opening. The motor should enter the inner door panel key positions first followed by placement of the Window Regulator rail assembly in its designated slots. Use a 10 n.m torque wrench to fasten the left lower mounting screw (89 lb in) before completion. For correct Window Regulator fitting, begin by securing the lower rear screw then move to upper rear and lower front screws before tightening the upper front screw followed by hand tightening the remaining screws to 10 n.m (89 lb in). Put back the front door window and arm rest bracket as well as front door water deflector.
Window Regulator, Front Passenger Side
20783374
Q: How to replace the front side door window regulator on Buick Enclave?
A:
The replacement of front side door window regulators begins by removing door trim panels which requires appropriate left-right side procedures. Begin by detaching the water deflector and afterwards remove both energy absorber retainers followed by the energy absorber component. The next step involves removing window guide to regulator bolts while also discarding covers that show the regulator bolt locations. Lift the window to the maximum upward position and disconnect the electrical connector attached to the motor of the regulator. Release the upper bolt that maintains the regulator-to-upper-inner-door connection while also removing the door-held motor nut followed by the regulator securing lower bolts. Bring the upper part of the regulator forward while removing it through the door opening while you transfer the power Window Motor as required. The first step for installation involves installing only part of the upper bolt to the regulator before inserting it through the door opening with a semi-horizontal orientation until the regulator reaches full forward position in the door cavity before completing the vertical rotation. After installing the upper bolt the regulator can be lowered onto the door sheet metal. The window support should then be removed and the window needs to be lowered onto the window guide of the regulator. The regulator window carrier bolts should be tuned loosely while operating the window until it reaches the uppermost position and confirms that it stays within the regulator channels. To complete installation there is a procedure to tighten the motor retention nut to 9 nm (80 lb in) followed by securing the regulator to door with bolts (3, 4) at 10 nm (88 lb in). Reattach the electrical connector to the regulator motor while replacing the energy absorber retainers and absorber alongside relighting the covers which disclose the regulator bolt holes. Finish the procedure by positioning the door trim panel back while using the appropriate procedures based on the left and right side of the vehicle.