How to replace the right engine mount on Buick LaCrosse?

Starting the right Engine Mount replacement process requires disconnecting the battery ground cable while also removing the throttle body air duct. Start by taking off the Engine Mount struts followed by lifting and supporting the vehicle. You should disconnect the engine right side Exhaust Manifold from the three-way catalytic converter pipe before removing the right front wheel with its tire and right engine splash shield. You should remove the Engine Mount lower nuts before inserting a wooden block to protect the Oil Pan from damage against the jack support. A utility stand and wooden block should lift the engine so you can take out Engine Mount bracket-to-oil pan bolts along with Engine Mount bracket-to-engine bolt. Begin by removing the Engine Mount together with the Engine Mount bracket and then next uninstall the Engine Mount upper nuts before extracting the Engine Mount from its bracket. Install the Engine Mount first onto the Engine Mount bracket and follow it with Engine Mount upper nuts which need to be tightened to 53 nm (39 ft. Lbs.). Use your hands to tighten all Engine Mount bracket bolts before mounting the Engine Mount bracket along with its Engine Mount to the Oil Pan. Tighten the Engine Mount bracket bolt to 58 nm (43 ft. Lbs.) after which you can lower the engine with the utility stand. After mounting the engine structure with its lower fasteners you must torque them to achieve 47 nm (35 ft. Lbs.). Reinstall the right engine splash shield followed by setting the right front wheel and tire and use the three-way catalytic converter pipe to connect to the right Exhaust Manifold of the engine. Last duties include lowering the vehicle and installing Engine Mount struts together with throttle body air inlet duct before reconnecting the battery ground cable.

How to inspect the engine mount on Buick Regal?

Engine support adapters (J28467-90A) and universal engine support fixture (J28467-B) should be used to elevate the engine before inspection so you can detect Engine Mount damage as the rubber produces minor tension. Inspection requires Engine Mount evaluation during the raising process to identify heat check cracks on hard rubber surfaces and rubber-metal plate detachments or center splits. Check for movement between metal plate sections of the Engine Mount and their attaching points then lower the engine while tightening its mounting bolts or nuts to the frame or Engine Mount Bracket.

OEM Buick Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

273 Engine Mounts found

View related parts
Buick Strut Mount Part Number: 22188174
$32.79 MSRP: $100.52
You Save: $67.73 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount
- Replaces: 10152224, 14036331, 14077778, 22112737
Fits the following Buick Models:
- Century | 1984-1994 | Custom, Estate Wagon, Limited, Special, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- Skylark | 1984-1985 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Buick Torque Strut Part Number: 22145939
$17.54 MSRP: $50.58
You Save: $33.04 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Front Mount; Mount; Strut; Strut, Engine Mounting
- Replaces: 22145938
Fits the following Buick Models:
- Skylark | 1995-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Mount Bracket Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount
- Replaces: 10154776, 12570320
Fits the following Buick Models:
- Century | 1997-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
- Rendezvous | 2002-2007 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
- Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View More
View related parts
Buick Strut Mount Part Number: 25840458
$39.02 MSRP: $68.11
You Save: $29.09 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut Bracket; Strut
Fits the following Buick Models:
- Enclave | 2009-2017 | Base, CX, CXL, Convenience, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Strut Mount Part Number: 20760911
$43.29 MSRP: $75.54
You Save: $32.25 (43%)
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Strut, Engine Mounting
- Replaces: 25749806
Fits the following Buick Models:
- Lucerne | 2006-2011 | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Transmission Mount Part Number: 22801992
$47.24 MSRP: $82.45
You Save: $35.21 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount; Front Trans Mount
Fits the following Buick Models:
- LaCrosse | 2010-2016 | Base, CX, CXL, CXS, Convenience, Leather, Premium, Sport Touring, Touring | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Regal | 2014-2017 | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Strut Mount Part Number: 20760910
$55.47 MSRP: $86.90
You Save: $31.43 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut; Strut, Engine Mounting
- Replaces: 15910486, 25749386
Fits the following Buick Models:
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Motor Mount Part Number: 10448575
$69.62 MSRP: $121.50
You Save: $51.88 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket
- Replaces: 10340740, 10448574, 17998813, 22178657, 22146466, 22175206, 22113282, 22146018, 10448576
Fits the following Buick Models:
- Century | 1997-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
- LaCrosse | 2005-2009 | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
- Regal | 1988-2004 | 25th Anniversary Edition, Custom, GS, GSE, Gran Sport, LS, LSE, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
- Rendezvous | 2002-2007 | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
- Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View More
View related parts
Buick Motor Mount Part Number: 15062381
$76.06 MSRP: $132.73
You Save: $56.67 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Mount, Engine Mounting
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS
View related parts
Buick Strut Part Number: 10345905
$79.45 MSRP: $138.65
You Save: $59.20 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut, Engine Mounting
Fits the following Buick Models:
- Terraza | 2006-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Motor Mount Part Number: 84034314
$89.49 MSRP: $156.17
You Save: $66.68 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Transmission Mount
- Replaces: 23438167, 23356077
Fits the following Buick Models:
- Regal Sportback | 2018-2020 | Avenir, Base, Essence, Preferred, Preferred II | 4 Cyl 2.0 L GAS
- Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Motor Mount Part Number: 22188497
$96.48 MSRP: $168.36
You Save: $71.88 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Front Mount; Engine Mount Dampening Cushion
- Replaces: 00459021, 14066861, 14039437, 459021, 97102453
Fits the following Buick Models:
- Commercial Chassis | 1991-1996 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Regal | 1984-1987 | Base, Limited | 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Buick Motor Mount Part Number: 95418203
$99.94 MSRP: $174.39
You Save: $74.45 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Mount; Mount, Engine Mounting
- Replaces: 95135159
Fits the following Buick Models:
- Encore | 2013-2022 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Rear Mount Part Number: 25840450
$109.75 MSRP: $191.52
You Save: $81.77 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount
- Position: Rear
Fits the following Buick Models:
- Enclave | 2009-2017 | Base, CX, CXL, Convenience, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Front Mount Part Number: 25840452
$112.35 MSRP: $196.05
You Save: $83.70 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount-Engine Front; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mount Dampening
- Position: Front
Fits the following Buick Models:
- Enclave | 2009-2017 | Base, CX, CXL, Convenience, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Mount Part Number: 13347454
$114.94 MSRP: $200.55
You Save: $85.61 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting
- Replaces: 13383624
Fits the following Buick Models:
- Verano | 2013-2017 | Base, Convenience, Leather, Sport Touring | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Buick Strut Mount Part Number: 10420009
$45.32 MSRP: $77.17
You Save: $31.85 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut; Strut, Engine Mounting
Fits the following Buick Models:
- LaCrosse | 2008-2009 | Super | 8 Cyl 5.3 L GAS
View related parts
Buick Front Mount Part Number: 10348601
$102.89 MSRP: $176.71
You Save: $73.82 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Engine Mount
- Position: Front
- Replaces: 22188109
Fits the following Buick Models:
- LaCrosse | 2008-2009 | Super | 8 Cyl 5.3 L GAS
View related parts
Buick Strut Bracket Part Number: 10274661
$177.35 MSRP: $301.93
You Save: $124.58 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Front Bracket; Engine Mount
Fits the following Buick Models:
- Rendezvous | 2002-2007 | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
- Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Motor Mount Part Number: 13227719
$80.24 MSRP: $132.18
You Save: $51.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket
Fits the following Buick Models:
- LaCrosse | 2010-2016 | Base, CX, CXL, CXS, Convenience, Leather, Premium, Sport Touring, Touring | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

| Page 1 of 14 |Next >

1-20 of 273 Results

Buick Engine Mount

Choose OEM Engine Mount, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Engine Mount. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Engine Mount ensures that the engine remains steady and still in order to have a quieter and smoother ride. Over the decades, Buick proposes a ride that is not too supple as to choke driver communication. The nameplate, which was established in 1903, balanced old school elegance with continuous infusions of new technology. Concept cars such as the Wildcat EV demonstrate to the world that the badge is still experimenting rather than resting on its laurels. The commute to work feels almost luxurious due to smooth steering, good quality of building, and muffled interiors. Drivers can see how the brand has been focusing on self-assured confidence rather than boy-racer dramatics. Buick also considers the fact that it is durable; therefore, the cabin remains tight over the years of potholes. Each release is an attempt to be comfortable today but suggest the roads tomorrow. You intervene, close the door and the world outside withdraws. The Engine Mount supports the block to the subframe, isolates the block against shaking, clunks which pass up the steering column, with rubber-isolated steel to provide brute strength, with hydraulic chambers to provide additional damping, or with smart electroactive units that stiffen under high rpm and soften at idle. An Engine Mount failure is soft in the middle, drips, or rubs metal to metal, thus a visual inspection every day prevents the problem until the hose is ruptured or the dashboard rattles. Change a worn mount, and the car becomes as sluggish as a cat, revs remain sharp, long trips no longer leave you with numb hands.

Buick Engine Mount Parts and Q&A

Motor Mount
10448575
Q: How to replace the right engine mount on Buick LaCrosse?
A:
Starting the right Engine Mount replacement process requires disconnecting the battery ground cable while also removing the throttle body air duct. Start by taking off the Engine Mount struts followed by lifting and supporting the vehicle. You should disconnect the engine right side Exhaust Manifold from the three-way catalytic converter pipe before removing the right front wheel with its tire and right engine splash shield. You should remove the Engine Mount lower nuts before inserting a wooden block to protect the Oil Pan from damage against the jack support. A utility stand and wooden block should lift the engine so you can take out Engine Mount bracket-to-oil pan bolts along with Engine Mount bracket-to-engine bolt. Begin by removing the Engine Mount together with the Engine Mount bracket and then next uninstall the Engine Mount upper nuts before extracting the Engine Mount from its bracket. Install the Engine Mount first onto the Engine Mount bracket and follow it with Engine Mount upper nuts which need to be tightened to 53 nm (39 ft. Lbs.). Use your hands to tighten all Engine Mount bracket bolts before mounting the Engine Mount bracket along with its Engine Mount to the Oil Pan. Tighten the Engine Mount bracket bolt to 58 nm (43 ft. Lbs.) after which you can lower the engine with the utility stand. After mounting the engine structure with its lower fasteners you must torque them to achieve 47 nm (35 ft. Lbs.). Reinstall the right engine splash shield followed by setting the right front wheel and tire and use the three-way catalytic converter pipe to connect to the right Exhaust Manifold of the engine. Last duties include lowering the vehicle and installing Engine Mount struts together with throttle body air inlet duct before reconnecting the battery ground cable.
Strut Mount
10271462
Q: How to inspect the engine mount on Buick Regal?
A:
Engine support adapters (J28467-90A) and universal engine support fixture (J28467-B) should be used to elevate the engine before inspection so you can detect Engine Mount damage as the rubber produces minor tension. Inspection requires Engine Mount evaluation during the raising process to identify heat check cracks on hard rubber surfaces and rubber-metal plate detachments or center splits. Check for movement between metal plate sections of the Engine Mount and their attaching points then lower the engine while tightening its mounting bolts or nuts to the frame or Engine Mount Bracket.