How to replace the front crankshaft seal on Buick Enclave?

The first step before changing the front Crankshaft oil seal requires removal of the Crankshaft balancer. You should use a flat-bladed instrument to take out the Crankshaft oil seal but handle it with care to protect both the engine front cover and the Crankshaft. Front Crankshaft oil seals do not require any lubrication before installation either on the Crankshaft or balancer sealing surfaces. The new Crankshaft front oil seal installation requires the utilization of the oil seal installer (J 29184) before reattaching the Crankshaft balancer.

How to replace the front crankshaft seal on Buick Regal?

Proceeding with a crankshaft front oil seal replacement requires starting by removing the crankshaft balancer while protecting the crankshaft from damage. Proper use of a large screwdriver enables removal of the crankshaft front oil seal from its location without damaging either the seal bore or contact surfaces. The crankshaft balancer as well as the engine front cover must receive inspection for presence of scratches after removal. Apply the J 35354-A Seal Installer while placing the new crankshaft front oil seal into the engine front cover to tighten the bolt and ensure proper sealing. After using the J 35354-A tool to install the crankshaft front oil seal you should replace it with the crankshaft balancer. The last step involves leak inspection and execution of the CKP system variation learn procedure.

OEM Buick Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Crankshaft Seals found

View related parts
Buick Rear Main Seal Part Number: 90325571
$15.40 MSRP: $25.37
You Save: $9.97 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
- Replaces: 96101489, 90352112, 96376569
Fits the following Buick Models:
- Encore | 2013-2020 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Crankshaft Seal, Front Part Number: 12582313
$14.72 MSRP: $24.24
You Save: $9.52 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Crankshaft Front Oil; Timing Cover Gasket; Timing Cover Seal; Front Seal; Cover Seal; Crankshaft Balance Seal; Timing Cover Seal; Engine Front Cover Seal
- Position: Front
- Replaces: 24504098
Fits the following Buick Models:
- Century | 1986-1993 | Custom, Estate Wagon, Limited, Special, T-Type | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- LaCrosse | 2005-2009 | CX, CXL | 6 Cyl 3.8 L GAS
- LeSabre | 1992-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Lucerne | 2006-2008 | CX, CXL | 6 Cyl 3.8 L GAS
- Park Avenue | 1992-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
- Regal | 1990-2004 | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS
- Riviera | 1995-1999, 1992-1993 | Base, Luxury | 6 Cyl 3.8 L GAS
- Skylark | 1985-1993 | Base, Custom, Gran Sport, Limited, Luxury Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 6 Cyl 3.0 L GAS
View More
View related parts
Buick Rear Main Seal Part Number: 12637710
$42.94 MSRP: $73.74
You Save: $30.80 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal; Rear Main Seal Gasket; Rear Main Seal Retainer
- Position: Rear
- Replaces: 12608748, 12620955, 12592243, 12592242
Fits the following Buick Models:
- Enclave | 2008-2021 | Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS
- LaCrosse | 2010-2016, 2005-2008 | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Rendezvous | 2004-2006 | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View More
View related parts
Buick Front Crank Seal Part Number: 89017621
$21.75 MSRP: $34.51
You Save: $12.76 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Rear Main Bearing; Front Seal
- Position: Front
Fits the following Buick Models:
- Rainier | 2004 | CXL, CXL Plus | 6 Cyl 4.2 L GAS
View related parts
Buick Rear Main Seal Part Number: 12581717
$17.56 MSRP: $35.25
You Save: $17.69 (51%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 24577096
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS
View related parts
Buick Oil Seal, Front Part Number: 25193519
$9.34 MSRP: $15.39
You Save: $6.05 (40%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Engine Crankshaft Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Seal; Front Seal; Front Cover Seal; Seal, Engine Oil Pump Body
- Position: Front
Fits the following Buick Models:
- Encore | 2013-2021 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Oil Seal, Green Line, Front Part Number: 12584041
$9.13 MSRP: $15.04
You Save: $5.91 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Crankshaft Front Oil; Engine Crankshaft & Camshaft Seals; Timing Cover Gasket & Seal.; Front Crank Seal; Timing Cover Front Seal; Engine Front Cover & Crankshaft Seal; Oil Pump Body Seal.
- Position: Front
- Replaces: 12580989, 55564509, 12609467, 90571925
Fits the following Buick Models:
- Cascada | 2016-2019 | Base, Premium, Sport Touring | 4 Cyl 1.6 L GAS
- LaCrosse | 2010-2016 | Base, Convenience, CX, CXL, Leather, Premium | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
- Regal | 2011-2017 | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
- Verano | 2012-2017 | Base, Convenience, Leather, Premium, Sport Touring, Turbo | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View More
View related parts
Buick Oil Seal, Front Part Number: 10128316
$21.49 MSRP: $35.40
You Save: $13.91 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal; Oil Filter Seal; Front Seal; Timing Cover Oil Seal; Crankshaft Seal
- Position: Front
Fits the following Buick Models:
- Commercial Chassis | 1994-1996 | Base | 8 Cyl 5.7 L GAS
- Roadmaster | 1994-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.7 L GAS
View related parts
Buick Rear Main Seal Part Number: 90280462
$21.95 MSRP: $36.17
You Save: $14.22 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
- Replaced by: 12591866
Fits the following Buick Models:
- Skyhawk | 1987-1988 | Custom, Limited, SE, Sport, T-Type | 4 Cyl 2.0 L GAS
View related parts
Buick Rear Main Seal Part Number: 55576715
$20.80 MSRP: $32.58
You Save: $11.78 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
Fits the following Buick Models:
- Cascada | 2016-2019 | Base, Premium, Sport Touring | 4 Cyl 1.6 L GAS
View related parts
Buick Crankshaft Seal Part Number: 90183572
$25.13 MSRP: $41.40
You Save: $16.27 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Seal Ring; Front Crank Seal; Shaft Seals; Timing Cover Seal; Crankshaft Seal; Engine Oil Pump Cover.
- Position: Front
- Replaces: 90136297, 90156855
Fits the following Buick Models:
- Skyhawk | 1984-1989 | Custom, Limited, SE, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Buick Lower Timing Cover Seal, Front Part Number: 55503998
$2.40 MSRP: $3.96
You Save: $1.56 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Crankshaft Front (O Ring); Seal, Engine Front Cover & Crankshaft Seal
- Position: Front
Fits the following Buick Models:
- Envision | 2021-2023 | Avenir, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Rear Main Seal Part Number: 10036788
$15.88 MSRP: $24.87
You Save: $8.99 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
Fits the following Buick Models:
- Century | 1984-1992 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, Special | 4 Cyl 2.5 L GAS
- Skylark | 1984-1991 | Base, Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.5 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS
View More
View related parts
Buick Front Crank Seal Part Number: 14076303
$2.86 MSRP: $13.05
You Save: $10.19 (79%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal; Front Cover Seal
- Position: Front
Fits the following Buick Models:
- Skyhawk | 1985-1986 | Custom, Limited, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Buick Rear Main Seal Part Number: 22545259
$13.34 MSRP: $21.99
You Save: $8.65 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
Fits the following Buick Models:
- Skylark | 1992-1998 | Custom, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Buick Oil Seal Part Number: 552711
Product Specifications
- Other Name: Seal Assembly-Crankshaft Oil; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Front Cover Seal; Seal, Engine Front Cover & Crankshaft Seal
Fits the following Buick Models:
- Century | 1984-1985 | Custom, Estate, Estate Wagon, Limited, Olympia Limited | 6 Cyl 4.3 L DIESEL
- Electra | 1989, 1984-1987 | Estate Wagon, Limited, Park Avenue | 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- LeSabre | 1984-1990 | Collector's Edition, Custom, Estate Wagon, Limited | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Regal | 1984-1987 | Base, Limited | 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Riviera | 1984-1985 | Base, Luxury | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View More
View related parts
Buick Rear Main Seal Part Number: 90122607
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
Fits the following Buick Models:
- Skyhawk | 1984-1986 | Custom, Limited, Sport, T-Type | 4 Cyl 1.8 L GAS
View related parts
Buick Crankshaft Seal Part Number: 1193966
Product Specifications
- Other Name: Shedder-Crankshaft Oil; Front Crank Seal; Timing Cover Shield; Shedder, Engine Front Cover & Crankshaft Seal
Fits the following Buick Models:
- Electra | 1984 | Limited, Park Avenue | 6 Cyl 4.1 L GAS
- LeSabre | 1984-1985 | Collector's Edition, Custom, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS
- Riviera | 1985 | Base, Luxury, T-Type | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Crankshaft Seal, Front Part Number: 22531277
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal; Front Crank Seal; Timing Cover Oil Seal; Front Cover Seal; Timing Cover Front Seal; Seal
- Position: Front
Fits the following Buick Models:
- Skylark | 1988-1998 | Base, Custom, Gran Sport, Limited, Luxury Edition, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Buick Rear Main Seal Part Number: 10054563
Product Specifications
- Other Name: Seal Kit, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
Fits the following Buick Models:
- Century | 1984-1987 | Custom, Estate Wagon, Limited | 6 Cyl 2.8 L GAS
- Skyhawk | 1984 | Custom, Limited | 4 Cyl 2.0 L GAS
- Skylark | 1984-1985 | Custom, Limited, T-Type | 6 Cyl 2.8 L GAS
View More

| Page 1 of 2 |Next >

1-20 of 35 Results

Buick Crankshaft Seal

Choose OEM Crankshaft Seal, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Crankshaft Seal. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Crankshaft Seal Parts and Q&A

Oil Seal, Front
12608750
Q: How to replace the front crankshaft seal on Buick Enclave?
A:
The first step before changing the front Crankshaft oil seal requires removal of the Crankshaft balancer. You should use a flat-bladed instrument to take out the Crankshaft oil seal but handle it with care to protect both the engine front cover and the Crankshaft. Front Crankshaft oil seals do not require any lubrication before installation either on the Crankshaft or balancer sealing surfaces. The new Crankshaft front oil seal installation requires the utilization of the oil seal installer (J 29184) before reattaching the Crankshaft balancer.
Crankshaft Seal, Front
12582313
Q: How to replace the front crankshaft seal on Buick Regal?
A:
Proceeding with a crankshaft front oil seal replacement requires starting by removing the crankshaft balancer while protecting the crankshaft from damage. Proper use of a large screwdriver enables removal of the crankshaft front oil seal from its location without damaging either the seal bore or contact surfaces. The crankshaft balancer as well as the engine front cover must receive inspection for presence of scratches after removal. Apply the J 35354-A Seal Installer while placing the new crankshaft front oil seal into the engine front cover to tighten the bolt and ensure proper sealing. After using the J 35354-A tool to install the crankshaft front oil seal you should replace it with the crankshaft balancer. The last step involves leak inspection and execution of the CKP system variation learn procedure.