How to replace the rear crankshaft seal on Buick Rendezvous?

To replace the Crankshaft rear oil seal, start by removing the engine Flywheel without damaging the Crankshaft or seal bore. Then, after you've removed as much of the old grease as you can, pry out the Crankshaft rear oil seal by inserting, at an angle, through the dust lip, the flat-bladed tool while moving, the handle towards the end of the Crankshaft, repeating if old as many times as you can. Before installation, make sure that no oil lubrication is put on the Crankshaft rear oil seal and on the seal installer (J34686), and during the process of removing the protective sleeve off the sealing lip do not touch it to avoid damaging it. Clean Crankshaft sealing surface using a lint-free towel and looking at the lead-in edge for burrs and sharp edges, eliminate these using crocus cloth. Prcisely lift off the protective sleeve from the new Crankshaft rear oil seal and slip in it into the j34686, slidding it over the mandrel till it fastens against the collar. Splint the dowel pin of the j34686 with the dowel pin of Crankshaft attach tool hand or screw to 5 nm (45 inch lbs.) and t handle to compress the seal into the bore until the collar is tight against the engine block be certain to provide implement seating. Unscrew the t-handle until it cannot be unscrewed any further, then remove the attaching screws and finally reinstall the engine Flywheel.

How to replace the front crankshaft seal on Buick Rendezvous?

To get to the Crankshaft front oil seal, first remove the balancer. Handle the Crankshaft front oil seal with great care while prying it out with the aid of an appropriate tool, taking care not to compromise the engine front cover. To install, place the cover aligner and seal installer (J35468), and Crankshaft front oil seal in position on the engine front cover and Crankshaft, and the Crankshaft front oil seal using the cover aligner and seal installer (J35468) and suitable tool.

OEM Buick Rendezvous Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
Buick Rendezvous Rear Main Seal, Front Part Number: 14090906
$18.41 MSRP: $30.33
You Save: $11.92 (40%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal; Oil Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Seal; Front Cover Seal; Engine Front Cover Seal.
- Position: Front
- Replaces: 12577710
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Buick Rendezvous Rear Main Seal Part Number: 12637710
$42.94 MSRP: $73.74
You Save: $30.80 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal; Rear Main Seal Gasket; Rear Main Seal Retainer
- Position: Rear
- Replaces: 12608748, 12620955, 12592243, 12592242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Buick Rendezvous | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Oil Seal, Front Part Number: 12608750
$9.22 MSRP: $15.19
You Save: $5.97 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Crankshaft Seal; Front Crank Seal; Front Seal; Belt Tensioner Seal
- Position: Front
- Replaces: 12592355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Buick Rendezvous | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Rear Main Seal Part Number: 12592195
$48.27 MSRP: $76.64
You Save: $28.37 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal; Timing Cover Seal; Rear Main Seal Retainer; Seal Kit, Engine Rear Main Bearing
- Position: Rear
- Replaces: 14085829
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS

Buick Rendezvous Crankshaft Seal

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Rendezvous parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Rendezvous Crankshaft Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick Rendezvous Crankshaft Seal is one of the useful Auto parts that helps to ensure proper performance and durability of Buick Rendezvous vehicles. This Crankshaft Seal is placed at the front of the engine, and its function is to prevent the leakage of oil from the crankcase to maintain the supply of oil to the elements of the engine, thus reducing the friction, and possible wear and tear. Currently the Buick Rendezvous Crankshaft Seal is among the premier because of it strength which is usually a blend of metal and rubber. Ability to fit a wide array of Rendezvous models that were produced between 2002 and 2007 is an advantage in enhancing the efficiency and safety of Buick's. Crankshaft Seal failure can prove disastrous, since it heralds problems like oil leakage and poor engine performance, therefore should be replaced to ensure Buick Rendezvous proper functioning. The Crankshaft Seal not only increases durability of the engine but also immensely adds to comfort of driving the car since the rough operation is avoided. This car part has unique properties like the ability to perform well in high heat/high pressure applications in the automotive market. Through acquiring this durable part, Buick Rendezvous owners benefit from this reliable part since it improves the overall performance and safety of the car on the road.

Buick Rendezvous Crankshaft Seal Parts and Q&A

Rear Main Seal
12592195
Q: How to replace the rear crankshaft seal on Buick Rendezvous?
A:
To replace the Crankshaft rear oil seal, start by removing the engine Flywheel without damaging the Crankshaft or seal bore. Then, after you've removed as much of the old grease as you can, pry out the Crankshaft rear oil seal by inserting, at an angle, through the dust lip, the flat-bladed tool while moving, the handle towards the end of the Crankshaft, repeating if old as many times as you can. Before installation, make sure that no oil lubrication is put on the Crankshaft rear oil seal and on the seal installer (J34686), and during the process of removing the protective sleeve off the sealing lip do not touch it to avoid damaging it. Clean Crankshaft sealing surface using a lint-free towel and looking at the lead-in edge for burrs and sharp edges, eliminate these using crocus cloth. Prcisely lift off the protective sleeve from the new Crankshaft rear oil seal and slip in it into the j34686, slidding it over the mandrel till it fastens against the collar. Splint the dowel pin of the j34686 with the dowel pin of Crankshaft attach tool hand or screw to 5 nm (45 inch lbs.) and t handle to compress the seal into the bore until the collar is tight against the engine block be certain to provide implement seating. Unscrew the t-handle until it cannot be unscrewed any further, then remove the attaching screws and finally reinstall the engine Flywheel.
Oil Seal, Front
12608750
Q: How to replace the front crankshaft seal on Buick Rendezvous?
A:
To get to the Crankshaft front oil seal, first remove the balancer. Handle the Crankshaft front oil seal with great care while prying it out with the aid of an appropriate tool, taking care not to compromise the engine front cover. To install, place the cover aligner and seal installer (J35468), and Crankshaft front oil seal in position on the engine front cover and Crankshaft, and the Crankshaft front oil seal using the cover aligner and seal installer (J35468) and suitable tool.