How to replace the rear engine mount on Buick Lucerne?

A mechanic must begin the engine rear mount replacement by removing the Engine Mount strut initially. Remove first the wheel along with the tire from the right front position. A suitable adjustable jack should go under the transaxle oil pan and drivers must detach the Engine Mount to frame nut and Engine Mount to bracket nut. The combination of adjustable jack support with wood block enables users to lift the engine high enough for Engine Mount extraction. Think of the new Engine Mount as it should be installed first by attaching the Engine Mount to bracket nut then securing it at 80 n.m (59 lb ft). After lowering the transaxle with the adjustable jack you should install the Engine Mount to frame nut and torque it to 80 n.m (59 lb ft). It ends with removing the adjustable jack and block of wood from under the transaxle oil pan before reinstalling the right front wheel and tire along with the Engine Mount strut.

How to replace the front engine mount on Buick Lucerne?

The front air deflector serves as the first step in front mount engine replacement. An appropriate adjustable jack along with a block of wood should go beneath the Oil Pan. Second remove the Engine Mount bracket bolts and proceed by taking out the Engine Mount to frame nut and the Engine Mount to bracket nut. The adjustable jack working with a block of wood will lift the engine height for eliminating the Engine Mount. Set the new Engine Mount inside the engine bracket before final installation. Secure the Engine Mount bracket bolts at 70 n.m torque using 52 lb in foot-pounds and 65 n.m using 48 lb in foot-pounds when installing the bracket bolts. Secure the Engine Mount with the Engine Mount to bracket nut while tightening it to 80 n.m (59 lb ft). Lower the engine using the adjustable jack while installing the Engine Mount to frame nut until tightness reaches 80 n.m (59 lb ft). For the last step reinstall both the adjustable jack and block of wood under the Oil Pan before reinstalling the front air deflector.

OEM Buick Lucerne Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Engine Mounts found

View related parts
Buick Lucerne Strut Mount Part Number: 20760910
$49.36 MSRP: $84.78
You Save: $35.42 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut; Strut, Engine Mounting
- Replaces: 25749386, 15910486
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Strut Mount Part Number: 20760911
$42.91 MSRP: $73.70
You Save: $30.79 (42%)
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Strut, Engine Mounting
- Replaces: 25749806
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Front Mount Bracket Part Number: 25829748
$24.14 MSRP: $37.83
You Save: $13.69 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Front Mount Part Number: 25829735
$86.26 MSRP: $135.13
You Save: $48.87 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount-Engine Front; Engine Mount Bracket; Motor Mount
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Strut Bracket Part Number: 15870777
$7.39 MSRP: $11.58
You Save: $4.19 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut Engine Side; Motor Mount; Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Rear Mount Bracket Part Number: 25963968
$66.86 MSRP: $104.73
You Save: $37.87 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Mount; Motor Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Front Mount Part Number: 15910501
$108.37 MSRP: $169.75
You Save: $61.38 (37%)
Product Specifications
- Other Name: Mount-Engine Front; Engine Mount Bracket; Motor Mount; Mount, Engine Mount Dampening
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS
View related parts
Buick Lucerne Front Mount Part Number: 20877778
$123.46 MSRP: $194.28
You Save: $70.82 (37%)
Product Specifications
- Other Name: Mount-Engine Front; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mount Dampening
- Position: Front
- Replaces: 15893011, 20760912
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Front Mount Bracket Part Number: 25886948
Product Specifications
- Other Name: Bracket-Engine Front Mount; Bracket, Engine Mounting
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Rear Mount Part Number: 20877776
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Position: Rear
- Replaces: 20760906, 25963967
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Front Mount Part Number: 20760905
$138.73 MSRP: $218.28
You Save: $79.55 (37%)
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Lucerne | Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Front Mount Bracket Part Number: 25749797
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Rear Mount Bracket Part Number: 15279196
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Mount; Motor Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Strut Bracket Part Number: 25749385
Product Specifications
- Other Name: Bracket-Engine Mount Strut Engine Side; Motor Mount; Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS
View related parts
Buick Lucerne Front Mount Bracket Part Number: 15780838
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS
View related parts
Buick Lucerne Strut Bracket Part Number: 20756234
Product Specifications
- Other Name: Bracket-Engine Mount Strut Engine Side; Motor Mount; Bracket, Engine Mounting
- Replaces: 15893012
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Strut Bracket Part Number: 25749802
Product Specifications
- Other Name: Bracket-Engine Mount Strut Engine Side; Engine Mount Bracket; Motor Mount; Strut Mount Bracket; Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Rear Mount Bracket Part Number: 15910556
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Mount; Motor Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS
View related parts
Buick Lucerne Strut Bracket Part Number: 25749805
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Strut Mount Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Rear Mount Part Number: 15863998
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

Buick Lucerne Engine Mount

Want to cut long-term maintenance and repair costs? Choose OEM Engine Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Lucerne parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Lucerne Engine Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick Lucerne Engine Mount is an important part that increases the dependability and competency of the Buick Lucerne, a full-size premium luxury sedan manufactured between 2005 and 2011. This Engine Mount serves two essential functions: it isolates both the noise and vibration from the engine and effectively mounts the engine and safeguards the overall operation of the car's body. Hence, the Buick Lucerne is adaptable with many models; thus, satisfying the owners' desire to keep the car in optimal condition with regards to fuel efficiency and protection. However, some Lucerne models are equipped with level hydraulic mounts or the so-called" electronic-active" mounts that change the stiffness depending on the speed of the engine, which, of course, makes riding more comfortable. However, over a period, the condition of the Engine Mount degrades and hence, needs to be checked often and repaired when necessary. The Buick Lucerne is a very reliable car mainly because of its build and solid engineering that has been complimented by its special features such as the Magnetic Ride Control (MRC) that enhances the vehicle control. Also as safety features the Buick Lucerne is provided with the set of air bags and electronic stability control reflecting the concern of the manufacturer for people's safety. All in all, the Buick Lucerne Engine Mount is one of the exceptional products in the automotive market since it plays a vital role in improving the car's performance, engine efficiency, and safety; which are some of the critical aspects in a car.

Buick Lucerne Engine Mount Parts and Q&A

Rear Mount Bracket
15279196
Q: How to replace the rear engine mount on Buick Lucerne?
A:
A mechanic must begin the engine rear mount replacement by removing the Engine Mount strut initially. Remove first the wheel along with the tire from the right front position. A suitable adjustable jack should go under the transaxle oil pan and drivers must detach the Engine Mount to frame nut and Engine Mount to bracket nut. The combination of adjustable jack support with wood block enables users to lift the engine high enough for Engine Mount extraction. Think of the new Engine Mount as it should be installed first by attaching the Engine Mount to bracket nut then securing it at 80 n.m (59 lb ft). After lowering the transaxle with the adjustable jack you should install the Engine Mount to frame nut and torque it to 80 n.m (59 lb ft). It ends with removing the adjustable jack and block of wood from under the transaxle oil pan before reinstalling the right front wheel and tire along with the Engine Mount strut.
Strut Mount
20760910
Q: How to replace the front engine mount on Buick Lucerne?
A:
The front air deflector serves as the first step in front mount engine replacement. An appropriate adjustable jack along with a block of wood should go beneath the Oil Pan. Second remove the Engine Mount bracket bolts and proceed by taking out the Engine Mount to frame nut and the Engine Mount to bracket nut. The adjustable jack working with a block of wood will lift the engine height for eliminating the Engine Mount. Set the new Engine Mount inside the engine bracket before final installation. Secure the Engine Mount bracket bolts at 70 n.m torque using 52 lb in foot-pounds and 65 n.m using 48 lb in foot-pounds when installing the bracket bolts. Secure the Engine Mount with the Engine Mount to bracket nut while tightening it to 80 n.m (59 lb ft). Lower the engine using the adjustable jack while installing the Engine Mount to frame nut until tightness reaches 80 n.m (59 lb ft). For the last step reinstall both the adjustable jack and block of wood under the Oil Pan before reinstalling the front air deflector.