How to replace the left engine mount strut on Buick Regal?

The left engine mount strut replacement process requires users to begin by removing the bolt and nut from the left engine mount strut bracket on the engine before progressing to the bolt and nut from the left engine mount strut bracket on the upper radiator support until the engine mount strut can be extracted. Check the engine mount strut rubber integrity by observing its condition for both hardness and splitting as well as cracking. Insert the engine mount strut properly while securing its bolt and nut at the left engine mount strut bracket on the upper radiator support then tighten the engine mount strut nut to 48 Nm (35 ft. lbs.). The P-clip needs installation alignment with a vertical direction to the left engine mount strut bracket before securing it to the bolt of the left engine mount strut bracket. Secure the left engine mount strut bolt with its nut at the left engine mount strut bracket on the engine before tightening the engine mount strut nut to 48 Nm (35 ft. lbs.).

How to inspect the engine mount on Buick Regal?

Engine support adapters (J28467-90A) and universal engine support fixture (J28467-B) should be used to elevate the engine before inspection so you can detect Engine Mount damage as the rubber produces minor tension. Inspection requires Engine Mount evaluation during the raising process to identify heat check cracks on hard rubber surfaces and rubber-metal plate detachments or center splits. Check for movement between metal plate sections of the Engine Mount and their attaching points then lower the engine while tightening its mounting bolts or nuts to the frame or Engine Mount Bracket.

OEM Buick Regal Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

38 Engine Mounts found

View related parts
Buick Regal Transmission Mount Part Number: 22801992
$47.24 MSRP: $82.45
You Save: $35.21 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount; Front Trans Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Motor Mount Part Number: 10448575
$69.62 MSRP: $121.50
You Save: $51.88 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket
- Replaces: 10340740, 10448574, 17998813, 22178657, 22146466, 22175206, 22113282, 22146018, 10448576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2004 Buick Regal | 25th Anniversary Edition, Custom, GS, GSE, Gran Sport, LS, LSE, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Motor Mount Part Number: 22188497
$96.48 MSRP: $168.36
You Save: $71.88 (43%)
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Front Mount; Engine Mount Dampening Cushion
- Replaces: 00459021, 14066861, 14039437, 459021, 97102453
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, Limited | 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS
View related parts
Buick Regal Strut Mount Part Number: 10271462
$205.18 MSRP: $325.75
You Save: $120.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Bracket; Lower Bracket; Strut Front Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2004 Buick Regal | 25th Anniversary Edition, Custom, GS, GSE, Gran Sport, LS, LSE, Limited, Olympic Gold Edition | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Transmission Mount Part Number: 13324725
$57.17 MSRP: $99.77
You Save: $42.60 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount; Front Trans Mount
- Replaces: 13227773
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Motor Mount Part Number: 22744337
$86.02 MSRP: $150.13
You Save: $64.11 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket
- Replaces: 13227715, 13227714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Motor Mount Part Number: 23144105
$104.50 MSRP: $182.37
You Save: $77.87 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket
- Replaces: 13327296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Mount Bracket Part Number: 13227754
$26.83 MSRP: $42.61
You Save: $15.78 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Strut Mount Part Number: 10114751
$13.11 MSRP: $17.11
You Save: $4.00 (24%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Lift; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1994 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Regal Strut Mount Part Number: 10232891
$171.38 MSRP: $195.31
You Save: $23.93 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Lift; Torque Strut Mount; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Regal | Custom | 6 Cyl 3.1 L GAS
View related parts
Buick Regal Strut Mount Part Number: 10230877
$4.05 MSRP: $6.35
You Save: $2.30 (37%)
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Torque Strut; Strut; Strut, Engine Mount Dampening
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2004 Buick Regal | 25th Anniversary Edition, Custom, GS, GSE, Gran Sport, LS, LSE, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Mount Bracket Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Buick Regal | Custom | 6 Cyl 3.1 L GAS
View related parts
Buick Regal Mount Bracket Part Number: 10321856
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Bracket
- Replaces: 10243884
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2004 Buick Regal | 25th Anniversary Edition, Custom, GS, GSE, Gran Sport, LS, LSE, Limited, Olympic Gold Edition | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Strut Bracket, Driver Side Part Number: 24503458
Product Specifications
- Other Name: Bracket, Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2004 Buick Regal | 25th Anniversary Edition, Custom, GS, GSE, Gran Sport, LS, LSE, Limited, Olympic Gold Edition | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Engine Bracket Part Number: 52362003
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Strut Front Bracket Part Number: 10220711
Product Specifications
- Other Name: Bracket, Engine Lift; Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1995 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Strut Front Bracket Part Number: 52362018
Product Specifications
- Other Name: Bracket, Engine Lift; Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Mount Bracket Part Number: 10137340
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1993 Buick Regal | Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Regal Mount Bracket Part Number: 14088168
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1989 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Regal Torque Strut Bracket Part Number: 24500212
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut Rear Mount; Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS

| Page 1 of 2 |Next >

1-20 of 38 Results

Buick Regal Engine Mount

Want to cut long-term maintenance and repair costs? Choose OEM Engine Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Engine Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Among the excellent assemblies and parts in the Buick series, the Buick Regal Engine Mount is one of them. Its function is to provide optimal attachment of the engine and transmission on the car body, while at the same time reducing the amount of noises and vibrations being transferred throughout the car; Engine Mount can be considered as one of those parts that significantly affect the driving experience of numerous Buick Regal models. Some key features of this auto part are available for older and newer models of the Regal, which helped me to conclude that such a car is really comfortable enough to provide drivers with an efficient ride. The Engine Mount of Buick Regal contains some newly developed options, The hydraulic & electronic active mount for absorbing the shock & vibration and responding according to the engine speed gives the Buick Regal a different identity in the market. Hence, the Engine Mount should be helped, repaired, or replaced when required since a deteriorating part will affect the performance of the car and create a safety concern as well. Which this mount securing the position of the engine within the chassis it plays a role of ensuring enhanced stability and safety of the vehicle during its use since it results to a very minimal movements of the engine. The Buick Regal Engine Mount is another proof of Buick dedication to quality for each car Regal to give the customers a nice ride. Still, considering that the Buick Regal Engine Mount is a product that involves the improvement of one of the most important components of any car, quite a few comments have been made praising the traditional qualities of Buick combined with some new and unique features.

Buick Regal Engine Mount Parts and Q&A

Strut Mount
10230877
Q: How to replace the left engine mount strut on Buick Regal?
A:
The left engine mount strut replacement process requires users to begin by removing the bolt and nut from the left engine mount strut bracket on the engine before progressing to the bolt and nut from the left engine mount strut bracket on the upper radiator support until the engine mount strut can be extracted. Check the engine mount strut rubber integrity by observing its condition for both hardness and splitting as well as cracking. Insert the engine mount strut properly while securing its bolt and nut at the left engine mount strut bracket on the upper radiator support then tighten the engine mount strut nut to 48 Nm (35 ft. lbs.). The P-clip needs installation alignment with a vertical direction to the left engine mount strut bracket before securing it to the bolt of the left engine mount strut bracket. Secure the left engine mount strut bolt with its nut at the left engine mount strut bracket on the engine before tightening the engine mount strut nut to 48 Nm (35 ft. lbs.).
Strut Mount
10271462
Q: How to inspect the engine mount on Buick Regal?
A:
Engine support adapters (J28467-90A) and universal engine support fixture (J28467-B) should be used to elevate the engine before inspection so you can detect Engine Mount damage as the rubber produces minor tension. Inspection requires Engine Mount evaluation during the raising process to identify heat check cracks on hard rubber surfaces and rubber-metal plate detachments or center splits. Check for movement between metal plate sections of the Engine Mount and their attaching points then lower the engine while tightening its mounting bolts or nuts to the frame or Engine Mount Bracket.