OEM 2005 Chevrolet Equinox Ball Joint

2005 Chevrolet Equinox Ball Joint Parts and Q&A

• Q: How to replace the lower ball joint on 2005 Chevrolet Equinox?

  A: Before installing the new joint on the lower Control Arm you must first remove the component and anchor it in either a vise or appropriate fixture. Drill through the Ball Joint rivets using an 8 mm drill bit and continue drilling through the hole with a 12 mm drill bit. Use a standard drill bit to clean the Control Arm then take out the Ball Joint and note its position while preparation for reinstallation. Set the replacement Ball Joint onto its clean Control Arm according to the marked position. You must recognize the two ball stud types present to apply the right nut torque since selecting the wrong torque will harm the ball stud. Stick to the hardware included with your new Ball Joint and install all bolts with their heads facing upwards. You must adjust the nut torque to 60 n.m (44 lb-ft) when dealing with the lower Control Arm ball stud nut that has a silver cup at its bottom while adjusting the nut torque to 40 n.m (30 lb-ft) for the lower Control Arm ball stud nut with a black and flat base. Afterward install the lower Control Arm back.