How to replace the water pump on 4.8L, 5.3L, and 6.0L engines on GMC Sierra 1500?

You first need to drain the cooling system before starting work on 4.8l, 5.3l, and 6.0l engine Water Pump replacements. You can remove the air cleaner outlet duct by loosening the clamps around Throttle Body and maf/iat sensor. Take out the outlet duct through the hose connector. You can take down the engine sight shield and radiator vent hose from their clips on the radiator hose if necessary. First move the inlet hose clamp at the Water Pump before taking out the inlet hose then Fan Blade and accessory Drive Belt. Unclip the outlet hose barrel then take off the outlet hose plus surge tank outlet hose and heater inlet hose from the Water Pump. You need to remove Water Pump bolts and put out all components including gaskets while discarding old gaskets. Before putting in the Water Pump you should clean any oil residue from its gasket surfaces. Put new gaskets on the Water Pump and place the correct fasteners properly while keeping all fasteners free of paint or lubricant. Start by tightening the Water Pump bolts to 15 nm (11 ft lbs.) then continue to 30 nm (22 ft lbs.). Put back the heater inlet hose and its clamp then attach both surge tank outlet and outlet hoses with their seals. Install the accessory Drive Belt and Fan Blade. Place the inlet hose and its clamp at the engine vent inlet hose before connecting it to the radiator hose holders. Reinstall the engine sight shield by aligning the arrow on the Throttle Body end of the duct with the Throttle Body stud before connecting the air cleaner outlet duct. After mounting the hose clips secure the radiator inlet hose to its exit duct and tighten the air cleaner outlet clamps at Throttle Body and maf/iat sensor with 4 nm (35 inch lbs.) torque.

How to replace the water pump on GMC Yukon?

Start replacement of the Water Pump by removing the air cleaner outlet duct followed by draining the cooling system. Loosen and move the hose clamp away from the bleeding tube on the radiator coolant vent to remove the radiator vent inlet hose. Secondly you should relocate the radiator inlet clamp on top of the Water Pump and detach the radiator inlet hose. Reposition the radiator hoses aside to reveal the Water Pump. Displace the accessory Drive Belt after taking out both inlet lines. Detach the outlet hose from the Water Pump by unscrewing the radiator outlet clamp and replace it once done. Shift the clamp of the outlet hose towards the Water Pump and take off both the surge tank outlet hose and radiator. Put the outlet hose aside. Ease the heater inlet hose clamp from its position next to the Water Pump and extract the heater inlet hose. Detach all Water Pump bolts (301) and take out Water Pump (300) with gaskets (309) for disposal. Test the radiator vent passage before installing the pump to confirm proper airflow and clear the routing as needed. Place the Water Pump (300) into position with fresh gaskets (306) at the engine block, then put in the Water Pump bolts (301). Torque the bolts initially to 15 nm (11 lb ft) and end at 30 nm (22 lb ft). Secure the hose that leads to the heater door and its clamp before connecting the hose from the surge tank to its clamp on the radiator. Put the radiator outlet hose in place at the Water Pump area before installing its clamp. Connect the accessory Drive Belt afterward. Attach the radiator inlet hose in its correct position and then install the Water Pump hose above it along with securing the hose clamp at the Water Pump. Connect the radiator vent inlet hose to its proper place on the coolant air bleed pipe. Secure the hose with a clamp. Complete the cooling system before reconnecting the air cleaner outlet duct.

OEM GMC Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

65 Water Pumps found

View related parts
GMC Water Pump Part Number: 12692045
$120.21 MSRP: $233.32
You Save: $113.11 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit-Water; Pump Kit, Engine Coolant
- Replaces: 12683012
Fits the following GMC Models:
- Sierra 1500 | 2014-2019 | AT4, Base, Denali, Elevation, SLE, SLT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Yukon | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL | 2016-2017 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Water Pump Part Number: 12685731
$290.67 MSRP: $537.78
You Save: $247.11 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Water (W/Manifold); Water Manifold; Water Pump Assembly; Manifold; Pump, Engine Coolant
- Replaces: 12681259, 12678128, 12671752, 12670050
Fits the following GMC Models:
- Sierra 1500 | 2016-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Water Pump Part Number: 19168609
$249.47 MSRP: $484.18
You Save: $234.71 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Pump Kit, Engine Coolant
- Replaces: 88894035, 12456231
Fits the following GMC Models:
- C2500 | 2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- C3500 | 2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- K2500 | 2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- K3500 | 2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- Savana 2500 | 1999-2002 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- Savana 3500 | 1999-2002 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Water Pump Part Number: 12712953
$248.33 MSRP: $481.95
You Save: $233.62 (49%)
ADD TO CART
Product Specifications
- Other Name: Water Pump Assembly
- Replaced by: 12724894
Fits the following GMC Models:
- Sierra 1500 | 2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon | 2022-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2022-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Water Pump Part Number: 19168610
$223.61 MSRP: $433.95
You Save: $210.34 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Water Pump Assembly; Pump Kit, Engine Coolant
- Replaces: 12534772, 12530176, 88894036
Fits the following GMC Models:
- C1500 | 1996-1997 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C2500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C3500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- K1500 | 1996-1998 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- K2500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- K2500 Suburban | 1996-1999 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- K3500 | 1996-1999 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Water Pump Part Number: 88894247
$209.62 MSRP: $393.66
You Save: $184.04 (47%)
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Water Pump Assembly; Pump Kit, Engine Coolant
Fits the following GMC Models:
- C1500 | 1984 | Base | 6 Cyl 4.1 L GAS
- C2500 | 1984 | Base | 6 Cyl 4.1 L GAS
- G1500 | 1984 | Rally, Vandura | 6 Cyl 4.1 L GAS
- G2500 | 1984 | Rally, Vandura | 6 Cyl 4.1 L GAS
- G3500 | 1984 | Vandura | 6 Cyl 4.1 L GAS
- K1500 | 1984 | Base | 6 Cyl 4.1 L GAS
View More
View related parts
GMC Water Pump Part Number: 13592749
$121.23 MSRP: $227.66
You Save: $106.43 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Auxiliary Water; Auxiliary Pump; Pump, Heater Coolant Flow; Pump, Generator Drive; Pump, Engine Coolant
Fits the following GMC Models:
- Sierra 1500 | 2016-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Water Pump Part Number: 12724522
$179.89 MSRP: $349.14
You Save: $169.25 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Water (Module); Water Pump Assembly; Pump, Engine Coolant
- Replaced by: 12738953
- Replaces: 55506790, 55515497, 55510113, 55508939
Fits the following GMC Models:
- Acadia | 2020-2023 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
View related parts
GMC Water Pump Part Number: 55513550
$157.08 MSRP: $294.98
You Save: $137.90 (47%)
ADD TO CART
Product Specifications
- Other Name: Water Pump Assembly; Pump, Engine Coolant
- Replaces: 55503648, 55501354
Fits the following GMC Models:
- Terrain | 2018-2019 | SLE, SLT | 4 Cyl 1.6 L DIESEL
View related parts
GMC Auxiliary Pump Part Number: 23463177
$79.31 MSRP: $153.94
You Save: $74.63 (49%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Auxiliary Water; Water Pump; Pump, Engine Coolant
Fits the following GMC Models:
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
GMC Water Pump Part Number: 12707676
$166.89 MSRP: $493.96
You Save: $327.07 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Water Pump Assembly
- Replaced by: 12740339
Fits the following GMC Models:
- Savana 2500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
- Savana 3500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
- Sierra 1500 | 2019-2021 | Base | 6 Cyl 4.3 L GAS
View More
View related parts
GMC Water Pump Part Number: 12708488
$241.16 MSRP: $452.88
You Save: $211.72 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit-Water; Water Pump Assembly; Pump Kit, Engine Coolant
- Replaces: 12529308, 12484890, 19168606
Fits the following GMC Models:
- C2500 | 1984-1986 | Base, High Sierra, Sierra Classic | 8 Cyl 7.4 L GAS
- C2500 Suburban | 1984-1986 | Base, High Sierra, Sierra Classic | 8 Cyl 7.4 L GAS
- C3500 | 1984-1986 | Base, High Sierra, Sierra Classic | 8 Cyl 7.4 L GAS
- Jimmy | 1987-1991 | Base, Sierra Classic | 8 Cyl 6.2 L DIESEL
- K3500 | 1984-1986 | Base, High Sierra, Sierra Classic | 8 Cyl 7.4 L GAS
- R2500 | 1987-1989 | Base, High Sierra, Sierra Classic | 8 Cyl 7.4 L GAS
- R2500 Suburban | 1987-1991 | Base, High Sierra, Sierra Classic, SLE | 8 Cyl 7.4 L GAS
- R3500 | 1987-1991 | Base, High Sierra, Sierra Classic, SLE | 8 Cyl 7.4 L GAS
- V3500 | 1987-1991 | Base, High Sierra, Sierra Classic, SLE | 8 Cyl 7.4 L GAS
View More
View related parts
GMC Auxiliary Pump Part Number: 13546428
$91.59 MSRP: $172.00
You Save: $80.41 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Auxiliary Water; Water Pump; Pump, Heater Coolant Flow; Pump, Heater
- Replaced by: 13551855
Fits the following GMC Models:
- Yukon | 2021-2023 | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon XL | 2021-2023 | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Auxiliary Pump Part Number: 23330961
$98.91 MSRP: $179.02
You Save: $80.11 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Auxiliary Water; Water Pump; Pump, Engine Coolant
Fits the following GMC Models:
- Terrain | 2018-2019 | SLE, SLT | 4 Cyl 1.6 L DIESEL
View related parts
GMC Water Pump Part Number: 25204309
$173.71 MSRP: $340.10
You Save: $166.39 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Water Pump Assembly; Housing
- Replaced by: 25205820
Fits the following GMC Models:
- Terrain | 2018-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS
View related parts
GMC Water Pump Part Number: 12725728
$282.59 MSRP: $553.28
You Save: $270.69 (49%)
ADD TO CART
Product Specifications
- Other Name: Pump, Engine Coolant
- Replaced by: 12735409
Fits the following GMC Models:
- Savana 2500 | 2021-2023 | Base, LS, LT | 8 Cyl 6.6 L GAS
- Savana 3500 | 2021-2023 | Base, LS, LT | 8 Cyl 6.6 L GAS
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View More
View related parts
GMC Auxiliary Pump Part Number: 13546432
$98.64 MSRP: $156.58
You Save: $57.94 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Auxiliary Water; Water Pump; Pump, Heater
- Replaced by: 13551859
Fits the following GMC Models:
- Yukon | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Pump Assembly Part Number: 25880378
$191.14 MSRP: $342.86
You Save: $151.72 (45%)
Product Specifications
- Other Name: Pump, Engine Coolant; Engine Auxiliary Water Pump; Water Pump
Fits the following GMC Models:
- Yukon | 2009-2013 | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Water Pump Part Number: 12685259
$354.90 MSRP: $636.60
You Save: $281.70 (45%)
Product Specifications
- Other Name: Pump Assembly-Water (W/Manifold); Pump, Engine Coolant
- Replaced by: 12741059
- Replaces: 12671395
Fits the following GMC Models:
- Sierra 1500 | 2016-2018 | Base, Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV)
View related parts
GMC Water Pump Part Number: 12679360
$36.66 MSRP: $65.46
You Save: $28.80 (44%)
Product Specifications
- Other Name: Pump Kit-Water; Pump Kit, Engine Coolant
- Replaced by: 12744882
Fits the following GMC Models:
- Canyon | 2017-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SLE, SLT | 6 Cyl 3.6 L GAS

| Page 1 of 4 |Next >

1-20 of 65 Results

GMC Water Pump

Choose OEM Water Pump, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Water Pump. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

The GMC Water Pump maintains the steady temperatures of the engines and improves the overall reliability of the entire lineup, which is why it is one of the significant elements of the engineering that promotes the reputation of the brand as a tough one. GMC started the construction of hauling and towing machines more than a hundred years ago and that tradition is reflected in the robust frames, professional grade suspensions and powertrains which can move heavy loads without grumbling. Drivers love the quiet cabins which reduce road noise, the safety requirements such as surround vision that allows drivers to see ahead and the innovative MultiPro tailgate that can be flipped, folded and stepped to ease loading and unloading. Every model undergoes rigorous testing to maintain high reliability and constant technological improvements also ensure that every truck or SUV is modern and competent. This capability-comfort balance is appealing to families as well as outdoor adventure people and workers, which is ensuring GMC a sure place on the road and in the workplace. In this all-round fleet, the Water Pump has a silent but significant position. A belt or electric unit forces the radiator coolant to the engine jackets to remove the heat generated during the combustion process and eliminate power robbing overheating. In modern models, the housings are made of lightweight aluminum, the impellers are reinforced, and the passages are optimized to accelerate moving fluid with reduced amounts of mechanical power required. Once the indications such as leaks, rumbling bearings or increased temperatures are detected, by changing the Water Pump, the cooling performance, fuel economy and any GMC will be ready to work lots of miles.

GMC Water Pump Parts and Q&A

Water Pump
89060527
Q: How to replace the water pump on 4.8L, 5.3L, and 6.0L engines on GMC Sierra 1500?
A:
You first need to drain the cooling system before starting work on 4.8l, 5.3l, and 6.0l engine Water Pump replacements. You can remove the air cleaner outlet duct by loosening the clamps around Throttle Body and maf/iat sensor. Take out the outlet duct through the hose connector. You can take down the engine sight shield and radiator vent hose from their clips on the radiator hose if necessary. First move the inlet hose clamp at the Water Pump before taking out the inlet hose then Fan Blade and accessory Drive Belt. Unclip the outlet hose barrel then take off the outlet hose plus surge tank outlet hose and heater inlet hose from the Water Pump. You need to remove Water Pump bolts and put out all components including gaskets while discarding old gaskets. Before putting in the Water Pump you should clean any oil residue from its gasket surfaces. Put new gaskets on the Water Pump and place the correct fasteners properly while keeping all fasteners free of paint or lubricant. Start by tightening the Water Pump bolts to 15 nm (11 ft lbs.) then continue to 30 nm (22 ft lbs.). Put back the heater inlet hose and its clamp then attach both surge tank outlet and outlet hoses with their seals. Install the accessory Drive Belt and Fan Blade. Place the inlet hose and its clamp at the engine vent inlet hose before connecting it to the radiator hose holders. Reinstall the engine sight shield by aligning the arrow on the Throttle Body end of the duct with the Throttle Body stud before connecting the air cleaner outlet duct. After mounting the hose clips secure the radiator inlet hose to its exit duct and tighten the air cleaner outlet clamps at Throttle Body and maf/iat sensor with 4 nm (35 inch lbs.) torque.
Water Pump
12681417
Q: How to replace the water pump on GMC Yukon?
A:
Start replacement of the Water Pump by removing the air cleaner outlet duct followed by draining the cooling system. Loosen and move the hose clamp away from the bleeding tube on the radiator coolant vent to remove the radiator vent inlet hose. Secondly you should relocate the radiator inlet clamp on top of the Water Pump and detach the radiator inlet hose. Reposition the radiator hoses aside to reveal the Water Pump. Displace the accessory Drive Belt after taking out both inlet lines. Detach the outlet hose from the Water Pump by unscrewing the radiator outlet clamp and replace it once done. Shift the clamp of the outlet hose towards the Water Pump and take off both the surge tank outlet hose and radiator. Put the outlet hose aside. Ease the heater inlet hose clamp from its position next to the Water Pump and extract the heater inlet hose. Detach all Water Pump bolts (301) and take out Water Pump (300) with gaskets (309) for disposal. Test the radiator vent passage before installing the pump to confirm proper airflow and clear the routing as needed. Place the Water Pump (300) into position with fresh gaskets (306) at the engine block, then put in the Water Pump bolts (301). Torque the bolts initially to 15 nm (11 lb ft) and end at 30 nm (22 lb ft). Secure the hose that leads to the heater door and its clamp before connecting the hose from the surge tank to its clamp on the radiator. Put the radiator outlet hose in place at the Water Pump area before installing its clamp. Connect the accessory Drive Belt afterward. Attach the radiator inlet hose in its correct position and then install the Water Pump hose above it along with securing the hose clamp at the Water Pump. Connect the radiator vent inlet hose to its proper place on the coolant air bleed pipe. Secure the hose with a clamp. Complete the cooling system before reconnecting the air cleaner outlet duct.