Why is it important to inspect the Steering Shaft after a collision on GMC Sierra 1500?

A post-collision vehicle inspection requires evaluation of the Steering Column Intermediate Shaft due to its convoluted assembly. Model C1500 contains just a single convoluted area whereas the others feature two of these areas. It is mandatory to check the convoluted areas for damage right after deploying the Air Bags. A straight edge should be applied to different portions of the intermediate shaft to evaluate its straightness during inspection. Any identified bending or damage to the shaft requires replacing it.

How to replace the lower intermediate steering shaft on GMC Yukon?

Begin lower intermediate Steering Shaft replacement by setting front wheels to straight ahead positions while locking the Steering Column to avoid sir coil assembly damage. The Steering Column anti-rotation pin (J 42640) goes into the Steering Column lower access hole and allows you to mark down all necessary intermediate shaft positions before actual installation. Start by disassembling the shaft with initial removal of the upper and lower shaft bolt and then taking away the lower shaft coupler bolt to slide the intermediate shaft assembly towards the dash until the lower shaft coupler clears the steering gear input shaft. First re-fit the lower end of the intermediate shaft into the lower shaft coupler and the upper end of the intermediate shaft into the upper shaft. Maintain the alignment between the noted marks if you plan to use the same shaft. Apply torque of 47 nm (35 ft. Lbs.) through installation of the lower intermediate shaft coupler onto the steering worm shaft followed by tightening the bolt of the lower coupler and upper shaft to 47 nm (35 ft. Lbs.) while securing the pinch bolt to the same torque value. Remove the Steering Column anti-rotation pin (J 42640) from the lower access hole of the Steering Column.

OEM GMC Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

117 Steering Shafts found

View related parts
GMC Intermediate Shaft Part Number: 84530611
$68.94 MSRP: $109.46
You Save: $40.52 (38%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Upper Shaft
- Replaces: 84363100, 84462303, 84276399, 84159774, 23370453, 23253787
Fits the following GMC Models:
- Canyon | 2015-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Intermediate Shaft Part Number: 84370714
$107.27 MSRP: $184.22
You Save: $76.95 (42%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Lower Shaft; Upper Shaft; Intermed Shaft; Coupling
- Position: Upper
- Replaced by: 85104192
Fits the following GMC Models:
- Sierra 1500 | 2007-2019 | AT4, Base, Denali, Elevation, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 1500 Limited | 2019 | Base, SLE | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Sierra 2500 HD | 2007-2018 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007-2018 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Yukon | 2007-2020 | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL | 2015-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL 1500 | 2007-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL 2500 | 2007-2013 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Coupling Shaft Part Number: 25873103
$90.01 MSRP: $154.58
You Save: $64.57 (42%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Steering Gear Coupling; Steering Shaft; Coupling
- Replaced by: 85721658
Fits the following GMC Models:
- Sierra 2500 HD | 2011-2014 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2011-2014 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Upper Shaft Part Number: 86783121
$61.07 MSRP: $96.96
You Save: $35.89 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate
- Replaced by: 85699593
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Lower Shaft Part Number: 85104190
$90.01 MSRP: $154.58
You Save: $64.57 (42%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaced by: 85721658
Fits the following GMC Models:
- Sierra 2500 HD | 2015-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2015-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Intermediate Shaft Part Number: 84979332
$71.14 MSRP: $112.95
You Save: $41.81 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Lower Shaft; Lock Module Bolt
- Replaced by: 85554371
- Replaces: 23134851, 22869201, 84731541
Fits the following GMC Models:
- Acadia | 2017-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Upper Shaft Part Number: 85608894
$93.85 MSRP: $149.00
You Save: $55.15 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Intermed Shaft
- Replaced by: 85671422
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Steering Shaft Part Number: 26086243
$77.54 MSRP: $121.45
You Save: $43.91 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column; Upper Shaft
- Position: Upper
Fits the following GMC Models:
- Canyon | 2004-2008 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Intermediate Shaft Part Number: 85153846
$134.32 MSRP: $221.22
You Save: $86.90 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Intermediate Steering; Steering Shaft; Lower Shaft; Shaft, Steering Column Intermediate
- Replaced by: 85713051
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Coupling Shaft Part Number: 19420042
$268.66 MSRP: $426.55
You Save: $157.89 (38%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Lower Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 15906559, 20788671, 25862788, 25979050
Fits the following GMC Models:
- Sierra 1500 | 2009-2013 | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
- Yukon | 2008-2013 | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Upper Shaft Part Number: 84420151
$171.86 MSRP: $283.13
You Save: $111.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Intermed Shaft
- Position: Upper
- Replaced by: 85104191
Fits the following GMC Models:
- Sierra 2500 HD | 2018-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2018-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Yukon | 2017-2019 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Intermediate Shaft Part Number: 20887805
$266.25 MSRP: $438.59
You Save: $172.34 (40%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Lower Shaft
- Replaced by: 84326107
Fits the following GMC Models:
- Acadia | 2009-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
View related parts
GMC Intermediate Shaft Part Number: 23380162
$66.74 MSRP: $105.94
You Save: $39.20 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Lower Shaft
- Replaced by: 85830953
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Coupling Shaft Part Number: 19420044
$436.34 MSRP: $692.76
You Save: $256.42 (38%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Coupling; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 15827205, 19210226, 25862740
Fits the following GMC Models:
- Sierra 1500 | 2007-2008 | Denali, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Intermediate Shaft Part Number: 84488135
$63.31 MSRP: $100.49
You Save: $37.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Intermed Shaft
- Position: Upper
- Replaced by: 85713052
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Upper Shaft Part Number: 84488136
$93.85 MSRP: $149.00
You Save: $55.15 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft
- Position: Upper
- Replaced by: 85671422
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2021 | AT4, Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2021 | AT4, Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Intermed Shaft Part Number: 23369212
$171.86 MSRP: $283.13
You Save: $111.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft
- Position: Upper
- Replaced by: 85104191
Fits the following GMC Models:
- Sierra 2500 HD | 2017-2018 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2017-2018 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Lower Shaft Part Number: 84326107
$266.25 MSRP: $438.59
You Save: $172.34 (40%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate
- Replaces: 20887805, 23133291, 23254202
Fits the following GMC Models:
- Acadia | 2009-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
View related parts
GMC Lower Shaft Part Number: 86819219
$57.47 MSRP: $94.67
You Save: $37.20 (40%)
Ships in 1-2 Business Days
Product Specifications
- Other Name: Shaft, Steering Column Intermediate
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Steering Shaft Part Number: 19256705
$163.15 MSRP: $256.69
You Save: $93.54 (37%)
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Coupling Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 25880102
Fits the following GMC Models:
- Canyon | 2009-2012 | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

| Page 1 of 6 |Next >

1-20 of 117 Results

GMC Steering Shaft

Choose OEM Steering Shaft, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Steering Shaft. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Steering Shaft converts the feeling of the hands to the street command and provides the drivers with fast and accurate control. In 1901, GMC was started to expand into a series of pickups and SUVs which work in the real world. Its trucks are boxed steel framed, have heavy powertrains and tuned suspension to shake off heavy loads. Cabins remain silent since there are tight body mounts and intelligent noise suppression to ensure that long journeys are not as straining. GMC maintains driver awareness with the addition of the surround vision, hitch guidance, and easy-to-read digital displays that reduce the number of guesses. All the models undergo rough tests that maintain the level of reliability. MultiPro has a tailgate that is configurable to six positions including flip, fold, and stop to access the bed painlessly. It is effortless when towing is incorporated with trailering programs that guide you through the process of lighting and weight configurations. The Steering Shaft connects the steering wheel and the steering gearbox or steering rack and transmits all the twists with no slack. Forged joints, high-density steel tubing and sharp splines enable the column to move downstream without any heat, vibration or road spray resistance. A Steering Shaft today may come in pieces of upper, middle, or bottom segmented to fit into the collapsible safety areas. Play, rust, or torn boots are easily checked visually to maintain steering feel and lengthen service life. Wheels follow orders when the wheel is in motion, and the riding is smooth and responsive whether on the pavement or the dirt.

GMC Steering Shaft Parts and Q&A

Coupling Shaft
25958109
Q: Why is it important to inspect the Steering Shaft after a collision on GMC Sierra 1500?
A:
A post-collision vehicle inspection requires evaluation of the Steering Column Intermediate Shaft due to its convoluted assembly. Model C1500 contains just a single convoluted area whereas the others feature two of these areas. It is mandatory to check the convoluted areas for damage right after deploying the Air Bags. A straight edge should be applied to different portions of the intermediate shaft to evaluate its straightness during inspection. Any identified bending or damage to the shaft requires replacing it.
Steering Shaft
19329330
Q: How to replace the lower intermediate steering shaft on GMC Yukon?
A:
Begin lower intermediate Steering Shaft replacement by setting front wheels to straight ahead positions while locking the Steering Column to avoid sir coil assembly damage. The Steering Column anti-rotation pin (J 42640) goes into the Steering Column lower access hole and allows you to mark down all necessary intermediate shaft positions before actual installation. Start by disassembling the shaft with initial removal of the upper and lower shaft bolt and then taking away the lower shaft coupler bolt to slide the intermediate shaft assembly towards the dash until the lower shaft coupler clears the steering gear input shaft. First re-fit the lower end of the intermediate shaft into the lower shaft coupler and the upper end of the intermediate shaft into the upper shaft. Maintain the alignment between the noted marks if you plan to use the same shaft. Apply torque of 47 nm (35 ft. Lbs.) through installation of the lower intermediate shaft coupler onto the steering worm shaft followed by tightening the bolt of the lower coupler and upper shaft to 47 nm (35 ft. Lbs.) while securing the pinch bolt to the same torque value. Remove the Steering Column anti-rotation pin (J 42640) from the lower access hole of the Steering Column.