What tools are required to replace the rack and pinion boot and breather tube on GMC Canyon?

The replacement of Rack and Pinion Boot together with breather tube requires these tools from the vehicle: keystone clamp pliers (J 22610). Keystone clamp pliers (J 22610). First dismantle the outer tie rod before removing the hexagon jam nut which secures the inner tie rod assembly. To detach the tie rod end clamp from the Rack and Pinion Boot you need side cutters to remove the boot clamp from the Rack and Pinion Boot. Dispose of the old boot clamp. Before taking off the Rack and Pinion Boot and the breather tube, mark their positions on the gear assembly. When assembling the parts install a new boot clamp onto the new Rack and Pinion Boot and apply grease to both the inner tie rod assembly and the Rack And Pinion gear assembly before placing the Rack and Pinion Boot onto the inner tie rod assembly. Install the breather tube to its original position by aligning it with both the mark made during removal and the molded nipple of the Rack and Pinion Boot. The Rack and Pinion Boot should fit without any twists or puckers in its structure. Make necessary adjustments to the boot position by hand before it goes into the gear assembly groove. Crimp the boot clamp on the Rack and Pinion Boot using keystone clamp pliers (J 22610). Use the pliers to crimp the tie rod end clamp onto the Rack and Pinion Boot. Finish the assembly by reinstalling the hexagon jam nut to the inner tie rod assembly.

How to Ensure Proper Installation of the Rack and Pinion Boot on GMC Envoy?

The procedure to replace a Rack and Pinion Boot demands initial outer tie rod and Rack And Pinion gear removal from the vehicle. Every component of the boot requires replacement during inner tie rod replacement. When using side cutters to remove the Rack and Pinion Boot's small seal retaining clamp and large seal retaining clamp you should avoid cutting through the boot's end while also maintaining the boot's space distance from the tie rod. Pull the Rack and Pinion Boot firmly from the gear before throwing it away. To install the Rack and Pinion Boot add grease to its rib area before placing the new large seal retaining clamp on the boot. Set the boot in position across the inner Tie Rod End while keeping the boot arrows exactly opposite the gear housing markers. Set the new small seal retaining clamp on top of the boot before guiding the boot towards the assembly center where it will firmly seat into the grooves of the inner tie rod while avoiding twisting or puckering. Use j 22610 keystone clamp pliers (J 22610) to crimp the large seal retaining clamp on the boot while crimping the small seal retaining clamp to the inner tie rod assembly. Reinstall the Rack And Pinion gear together with the outer tie rod.

OEM GMC Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Rack and Pinion Boots found

View related parts
GMC Tie Rod Boot Part Number: 22834081
$38.56 MSRP: $63.53
You Save: $24.97 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Replaced by: 86570735
Fits the following GMC Models:
- Sierra 1500 | 2014-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Sierra 1500 Limited | 2019 | Base, SLE | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Yukon | 2015-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL | 2015-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Tie Rod Boot Part Number: 26089593
$77.64 MSRP: $123.27
You Save: $45.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows; Boot.; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
Fits the following GMC Models:
- Envoy | 2002-2009 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XL | 2002-2006 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XUV | 2004-2005 | SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
GMC Tie Rod Boot Part Number: 23214221
$23.51 MSRP: $37.34
You Save: $13.83 (38%)
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
Fits the following GMC Models:
- Acadia | 2017-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Tie Rod Boot Part Number: 15254057
$44.78 MSRP: $76.91
You Save: $32.13 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Tie Rod End Dust
Fits the following GMC Models:
- Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Yukon | 2007-2014 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL 1500 | 2007-2014 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Yukon XL 2500 | 2007-2013 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Tie Rod Boot Part Number: 84344215
$25.24 MSRP: $41.58
You Save: $16.34 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
- Replaces: 22966603
Fits the following GMC Models:
- Canyon | 2015-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Tie Rod Boot Part Number: 87860047
$27.90 MSRP: $45.96
You Save: $18.06 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Boot Kit; Boot Kit, Steering Tie Rod
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Upper Boot Part Number: 86803987
$8.78 MSRP: $13.75
You Save: $4.97 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Assembly-Intermediate Steering Shaft; Lower Boot; Boot; Boot, Steering Shaft U Joint
- Replaces: 23317134
Fits the following GMC Models:
- Hummer EV Pickup | 2022-2023 | 3X, Base, Edition 1 | BATTERY EV (EV/BEV)
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Tie Rod Boot Part Number: 23479355
$23.44 MSRP: $38.63
You Save: $15.19 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
Fits the following GMC Models:
- Terrain | 2018-2021 | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Tie Rod Boot Part Number: 15869896
$20.18 MSRP: $33.25
You Save: $13.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
Fits the following GMC Models:
- Acadia | 2007-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
View related parts
GMC Tie Rod Boot Part Number: 19209363
$128.66 MSRP: $204.26
You Save: $75.60 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Tie Rod Boot Part Number: 84924894
$64.11 MSRP: $105.60
You Save: $41.49 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
Fits the following GMC Models:
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Tie Rod Boot Part Number: 15895648
$68.29 MSRP: $108.44
You Save: $40.15 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
Fits the following GMC Models:
- Sierra 1500 | 2009-2013 | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
- Yukon | 2008-2013 | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Tie Rod Boot Part Number: 26076545
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot; Rack and Pinion Bellows Kit.; Outer Boot; Boot; Boot, Tie Rod End Dust
Fits the following GMC Models:
- Sierra 1500 | 1999-2007 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon | 2000-2006 | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Tie Rod Boot Part Number: 26095459
Product Specifications
- Other Name: Boot, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Bellows.; Boot Kit
Fits the following GMC Models:
- Canyon | 2004-2005 | SL, SLE, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
GMC Tie Rod Boot Part Number: 19133622
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Tie Rod End Dust
Fits the following GMC Models:
- Canyon | 2006-2012 | SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Tie Rod Boot Part Number: 88963416
Product Specifications
- Other Name: Boot Kit, Rear Wheel Steering Actuator; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering
- Position: Rear
- Replaces: 26091589
Fits the following GMC Models:
- Sierra 1500 | 2002-2004 | Base, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2002-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 2002-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2002-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2002-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon | 2002-2004 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2002-2004 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 2500 | 2002-2004 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More
View related parts
GMC Dust Seal Part Number: 26048003
Product Specifications
- Other Name: Boot, Steering Tie Rod; Seal, Steering Gear Hydraulic Valve
Fits the following GMC Models:
- Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Boot Kit Part Number: 19152656
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit, Tie Rod End Dust
Fits the following GMC Models:
- Canyon | 2007-2012 | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Boot Part Number: 26075957
Product Specifications
- Other Name: Boot, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot
Fits the following GMC Models:
- Sierra 1500 | 1999-2007 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Tie Rod Boot Part Number: 19210062
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

GMC Rack and Pinion Boot

Choose OEM Rack and Pinion Boot, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Rack and Pinion Boot. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Rack and Pinion Boot prevent grime and damage of steering guts. GMC began in 1901 and continued to concentrate on well-built frames, substantial payloads, and truthful functionality to the driver hauling more than hashtags. The brand fits weighty power modules to stiffened frames, adjusts the suspension to bumpy backroads, and has gone on to beat prototypes with a stick until the driving system pleads with it to stop. Cabins remain silent with tight seams of bodies and intelligent playlists, meaning conversations will not disappear into potholes. Surround vision, hitch guidance, and multi-function tailgates are available to assist the owners back the trailers, load gear quickly, and leave fewer dents behind on the day. Each model year GMC continues to fiddle with electronics and metallurgy, in pursuit of durability scores that count when somebody is riding in the bed with a paycheck. The boot is placed over the ends of the steering racks like a cranking shield, which traps grease within, seals mud, pebbles, and winter salts that would slice gears and tear seals till it feels like driving a rusty anchor. A Rack and Pinion Boot will crack, grit spills out, lubricant is spilled, and the rack teeth cut, thus leaving the wheel rough and frying the pump with additional effort. Replacing a new Rack and Pinion Boot will maintain a tight fit, keep the fluid in its place as well as allow the steering to remain light and precise during the storms, dust trails, and the endless parking lots.

GMC Rack and Pinion Boot Parts and Q&A

Tie Rod Boot
26095459
Q: What tools are required to replace the rack and pinion boot and breather tube on GMC Canyon?
A:
The replacement of Rack and Pinion Boot together with breather tube requires these tools from the vehicle: keystone clamp pliers (J 22610). Keystone clamp pliers (J 22610). First dismantle the outer tie rod before removing the hexagon jam nut which secures the inner tie rod assembly. To detach the tie rod end clamp from the Rack and Pinion Boot you need side cutters to remove the boot clamp from the Rack and Pinion Boot. Dispose of the old boot clamp. Before taking off the Rack and Pinion Boot and the breather tube, mark their positions on the gear assembly. When assembling the parts install a new boot clamp onto the new Rack and Pinion Boot and apply grease to both the inner tie rod assembly and the Rack And Pinion gear assembly before placing the Rack and Pinion Boot onto the inner tie rod assembly. Install the breather tube to its original position by aligning it with both the mark made during removal and the molded nipple of the Rack and Pinion Boot. The Rack and Pinion Boot should fit without any twists or puckers in its structure. Make necessary adjustments to the boot position by hand before it goes into the gear assembly groove. Crimp the boot clamp on the Rack and Pinion Boot using keystone clamp pliers (J 22610). Use the pliers to crimp the tie rod end clamp onto the Rack and Pinion Boot. Finish the assembly by reinstalling the hexagon jam nut to the inner tie rod assembly.
Tie Rod Boot
26089593
Q: How to Ensure Proper Installation of the Rack and Pinion Boot on GMC Envoy?
A:
The procedure to replace a Rack and Pinion Boot demands initial outer tie rod and Rack And Pinion gear removal from the vehicle. Every component of the boot requires replacement during inner tie rod replacement. When using side cutters to remove the Rack and Pinion Boot's small seal retaining clamp and large seal retaining clamp you should avoid cutting through the boot's end while also maintaining the boot's space distance from the tie rod. Pull the Rack and Pinion Boot firmly from the gear before throwing it away. To install the Rack and Pinion Boot add grease to its rib area before placing the new large seal retaining clamp on the boot. Set the boot in position across the inner Tie Rod End while keeping the boot arrows exactly opposite the gear housing markers. Set the new small seal retaining clamp on top of the boot before guiding the boot towards the assembly center where it will firmly seat into the grooves of the inner tie rod while avoiding twisting or puckering. Use j 22610 keystone clamp pliers (J 22610) to crimp the large seal retaining clamp on the boot while crimping the small seal retaining clamp to the inner tie rod assembly. Reinstall the Rack And Pinion gear together with the outer tie rod.