How to replace the drive pinion bearings on an 8.6-inch axle on GMC Savana 2500?

Vehicle lifting begins the process of drive Pinion Bearing replacement on an 8.6-inch axle followed by Differential assembly removal then drive pinion extraction from the axle. The split-plate bearing puller (J 22912-B) generates sufficient pressure to remove drive pinion bearings and has a step to take the selective pinion shim. The extraction of both outer and inner Pinion Bearing cups from the axle housing should be done through proper use of a hammer and brass drift for even removal. Install the outer Pinion Bearing cup through the combination of rear Pinion Bearing race installer (J 8611-01) and universal driver handle (J 8092) while the inner Pinion Bearing cup requires application of Pinion Bearing cup installer (J 45870) joined with universal driver handle (J 8092). Install the inner Pinion Bearing with the pinion cone and side bearing installer (J 24433) to press until the cone seats on the pinion shim while the selective shim thickness lies between the inner Pinion Bearing and the gear shoulder. Put in a new collapsible spacer after applying the proper axle lubricant to the pinion bearings. Place the outer Pinion Bearing inside the axle housing. The extension housing oil pump/seal installer (J 38694) must be used to position a brand new pinion oil seal after which you should insert the pinion into the axle housing while applying sealant (GM P/N 12346004 or Canadian P/N 10953480) to the splines of the pinion yoke before aligning it according to the removal marks. Apply light taps on the pinion yoke with a soft-faced hammer to mount it onto the pinion shaft until a few threads emerge before installing a new pinion nut which must not use the old one. The flange and pulley holding tool (J 8614-01) needs to be installed onto the pinion yoke while the technician tightens the pinion nut under tool restraint to achieve proper pinion end play. The pinion receiving torque ought to be measured with an inch-pound torque wrench set to 1.0-2.3 n.m (10-20 lb in) for used bearings or 1.7-3.4 n.m (15-30 lb in) for new bearings. Adjust the pinion nut until these torque values are met. Winding the pinion several times post-torque solution allows the bearings to settle properly before repeating the torque measurement for needed adjustments. Reinstall the Differential assembly after you add the appropriate axle lubricant which will be followed by lowering the vehicle.

OEM GMC Savana 2500 Pinion Bearing

Transmission Pinion Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Pinion Bearings found

View related parts
GMC Savana 2500 Pinion Bearings, Outer Part Number: 22943108
$35.57 MSRP: $69.63
You Save: $34.06 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Axle Bearing; Outer Bearing; Front Pinion Bearing; Bearing, Pinion Shaft Front
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2023 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 2500 Pinion Bearings Part Number: 9439879
$35.47 MSRP: $105.01
You Save: $69.54 (67%)
ADD TO CART
Product Specifications
- Other Name: Bearingfrt Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Axle Bearing; Output Shaft Bearing; Rear Pinion Bearing; Inner & Outer Pinion Bearings; Differential Drive Pinion Assembly.
- Position: Front Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Wheel Bearing Part Number: 9436881
$57.71 MSRP: $145.36
You Save: $87.65 (61%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2017, 1996-2002 GMC Savana 2500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings Part Number: 9417784
$24.86 MSRP: $68.16
You Save: $43.30 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pinion Gear Front; Differential Pinion Bearing; Axle Bearing; Rear Pinion Bearing; Front Pinion Bearing; Outer Pinion Bearing; Differential Drive Pinion Bearing; Front Axle Bearing.
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings Part Number: 9413427
$56.84 MSRP: $109.76
You Save: $52.92 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearings; Differential Drive, Steering Knuckle King, Pinion Shaft, Front Axle Bearings.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2014 GMC Savana 2500 | Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Side Bearings Part Number: 88943839
$48.83 MSRP: $144.56
You Save: $95.73 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Bearing
- Replaces: 26091723
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2010 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Side Bearings, Front Part Number: 26046759
$36.01 MSRP: $106.64
You Save: $70.63 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Differential; Bearing; Bearing, Differential Side Gear
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pinion Seal, Outer Part Number: 25824252
$47.14 MSRP: $92.28
You Save: $45.14 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Pinion Bearings; Side Bearings; Bearing; Bearing, Pinion Shaft Front
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings, Inner Part Number: 25824251
$87.27 MSRP: $170.86
You Save: $83.59 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Side Bearings; Bearing, Drive Pinion Rear And Intermediate
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Side Bearings Part Number: 25824250
$65.71 MSRP: $128.64
You Save: $62.93 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing
- Replaces: 09418390, 9418390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings Part Number: 23243839
$56.88 MSRP: $110.40
You Save: $53.52 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Pinion; Differential Pinion Bearing; Rear Pinion Bearing; Front/Inner/Outer Pinion; Diff/Drive Axle; Pinion/Clutch/Rear Wheel
- Position: Front
- Replaces: 09418357, 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2011 GMC Savana 2500 | Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings, Rear Part Number: 22943106
$71.56 MSRP: $138.90
You Save: $67.34 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Drive Pinion Rear And Intermediate; Differential Pinion Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 2500 Side Bearings Part Number: 11505123
$51.58 MSRP: $152.62
You Save: $101.04 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing; Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017, 1996-2002 GMC Savana 2500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Side Bearings Part Number: 9432585
$72.64 MSRP: $215.00
You Save: $142.36 (67%)
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Differential; Differential Bearing; Bearing, Differential Side Gear; Bearing, Differential Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 GMC Savana 2500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings Part Number: 9417781
$43.86 MSRP: $103.28
You Save: $59.42 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearing; Differential Drive Pinion Front, Drive Pinion, Pinion Shaft Front, Front Axle
- Position: Front Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings Part Number: 9414917
$70.11 MSRP: $133.08
You Save: $62.97 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Differential Bearing; Rear Pinion Bearing; Drive Pinion Rear; Axle Pinion Shaft; Ring And Pinion; Pinion Shaft Front.
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings Part Number: 9413168
$92.60 MSRP: $167.61
You Save: $75.01 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Roller; Differential Pinion Bearing; Rear Pinion Bearing; Front Pinion Bearing; Drive Pinion Bearing Assembly.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2011 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Side Bearings Part Number: 22786619
$126.72 MSRP: $245.94
You Save: $119.22 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2020 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pinion Bearings, Outer Part Number: 15534483
$52.41 MSRP: $94.85
You Save: $42.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Front Pinion Bearing; Bearing, Differential Pinion; Bearing, Pinion Shaft Front
- Position: Outer
- Replaces: 09440836, 9440836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2010 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

GMC Savana 2500 Pinion Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Pinion Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Savana 2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Savana 2500 Pinion Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Savana 2500 Pinion Bearing Parts and Q&A

Pinion Bearings
9417784
Q: How to replace the drive pinion bearings on an 8.6-inch axle on GMC Savana 2500?
A:
Vehicle lifting begins the process of drive Pinion Bearing replacement on an 8.6-inch axle followed by Differential assembly removal then drive pinion extraction from the axle. The split-plate bearing puller (J 22912-B) generates sufficient pressure to remove drive pinion bearings and has a step to take the selective pinion shim. The extraction of both outer and inner Pinion Bearing cups from the axle housing should be done through proper use of a hammer and brass drift for even removal. Install the outer Pinion Bearing cup through the combination of rear Pinion Bearing race installer (J 8611-01) and universal driver handle (J 8092) while the inner Pinion Bearing cup requires application of Pinion Bearing cup installer (J 45870) joined with universal driver handle (J 8092). Install the inner Pinion Bearing with the pinion cone and side bearing installer (J 24433) to press until the cone seats on the pinion shim while the selective shim thickness lies between the inner Pinion Bearing and the gear shoulder. Put in a new collapsible spacer after applying the proper axle lubricant to the pinion bearings. Place the outer Pinion Bearing inside the axle housing. The extension housing oil pump/seal installer (J 38694) must be used to position a brand new pinion oil seal after which you should insert the pinion into the axle housing while applying sealant (GM P/N 12346004 or Canadian P/N 10953480) to the splines of the pinion yoke before aligning it according to the removal marks. Apply light taps on the pinion yoke with a soft-faced hammer to mount it onto the pinion shaft until a few threads emerge before installing a new pinion nut which must not use the old one. The flange and pulley holding tool (J 8614-01) needs to be installed onto the pinion yoke while the technician tightens the pinion nut under tool restraint to achieve proper pinion end play. The pinion receiving torque ought to be measured with an inch-pound torque wrench set to 1.0-2.3 n.m (10-20 lb in) for used bearings or 1.7-3.4 n.m (15-30 lb in) for new bearings. Adjust the pinion nut until these torque values are met. Winding the pinion several times post-torque solution allows the bearings to settle properly before repeating the torque measurement for needed adjustments. Reinstall the Differential assembly after you add the appropriate axle lubricant which will be followed by lowering the vehicle.